Blaupunkt 400 BT installation instructions User settings

User settings

User settings

Calling and exiting the user menu

￿Briefly press the MENU•OK button ? to open the menu.

￿Press the button @ / 2 repeatedly until the desired menu item is selected.

￿Perform the setting (see the next section).

￿Briefly press the MENU•OK button ? to select a different menu item.

- or -

￿Briefly press the DIS/ESC button = to exit the menu.

Note:

The menu is automatically exited approx. 15 seconds after the last button activation and you are returned to the display of the cur- rent audio source.

Performing settings in the user menu

CDC

Setting the rear AUX input mode Settings: ON (to connect a CD changer or another external audio source), OFF (to connect a C‘n‘C-ready Blaupunkt interface).

￿Press the button > to open the sub- menu.

￿Press the button > to change between the settings.

￿Briefly press the MENU•OK button ? to confirm the selected setting.

The car sound system automatically switches off and on again with the selected setting.

C‘N‘C

Assigning an individual device number to con- nected C‘n‘C-ready interfaces (C‘n‘C = Command and Control). Length: 4 digits, characters: 0-9, A-F (hexadecimal).

￿Press the button > to open the sub- menu.

￿Press the button @/ 2to select the interface ("DEV 1 - 3").

￿Press the button >to change the device number.

￿Press the button 5/ > to change between the positions.

The character at the selected position flashes if selected.

￿Press the button @ / 2 to select a character at the selected location.

￿Briefly press the MENU•OK button ? to confirm the device number entered.

CDTEXT

Switching the display of CD text on or off. Set- tings: ON, OFF.

￿Press the button > to open the sub- menu.

￿Press the button > to change between the settings.

￿Briefly press the MENU•OK button ? to confirm the selected setting.

TA VOLUME

(only for tuner region "EUROPE")

Setting the minimum volume for traffic announce- ments. Settings: 1 - 50.

￿Press the button > to open the sub- menu.

￿Press the button @ / 2 or turn the volume control 4to perform the setting.

SENS

Only possible in FM radio mode: Setting the sen-

sitivity of station seek tuning. Settings: LO1 (low- est) – HI6 (highest).

￿Press the button > to open the sub- menu.

￿Press the button @ / 2 to perform the setting.

ENGLISH

47