JVC KD-R514 SSM *2 SSM 01, SSM 07 SSM 13, Color, R06 F06, L06 R06, Vol Adj, Sub.W, AM *7, 00 to

Menu operations

1	[Hold]	2	3 Repeat step 2 if necessary.
			• To return to the previous menu, press BACK.
			• To exit from the menu, press DISP or MENU.
Category	Menu item		Selectable setting, [Initial: Underlined]
DEMO	DEMO	• DEMO ON	: Display demonstration will be activated automatically if
		• DEMO OFF	no operation is done for about 20 seconds.
			: Cancels.
CLOCK	CLOCK SET	[ 1:00 ]	: Adjust the hour, then the minute.
	BASS	—	: For settings, see “Storing your own sound mode” on

Selecting the variable buttons and display color illumination

You can select your preferred color for buttons illumination (except for EQ/BASS-TRE / DISP) and display color separately.

Button zone Display zone

All zone

EQ			page 2.
	MIDDLE
PRO
	TREBLE
	DIMMER	• DIMMER ON	: Dims the display and button illumination.
		• DIMMER OFF	: Cancels.
	SCROLL *1	• SCROLL ONCE	: Scrolls the displayed information once.
DISPLAY		• SCROLL AUTO	: Repeats scrolling (at 5-second intervals).
		• SCROLL OFF	: Cancels.
		Pressing DISP for more than one second can scroll the display regardless of
		the setting.
	TAG DISPLAY	• TAG ON	: Shows the Tag information while playing MP3/WMA
		• TAG OFF	tracks.
			: Cancels.
	SSM *2	• SSM 01 – 06	: For settings, see page 2.
		• SSM 07 – 12
		• SSM 13 – 18
	MONO *2	• MONO ON	: Activate monaural mode to improve FM reception, but

1 [Hold] or

2

]<COLOR> ] <BUTTON ZONE> / <DISP ZONE> / <ALL ZONE>

• Pressing COLOR in step 1 will enter zone selection menu (BUTTON ZONE /DISP ZONE / ALL ZONE) directly.

3

]Select your preferred color from one of the

29 preset colors or <USER> color.

4Repeat steps 2 and 3 to select a different zone and your preferred color.

•If <ALL ZONE> is selected in step 2, the buttons and display illumination changed to the current/selected <BUTTON ZONE> color.

You can also change the <ALL ZONE> color to one of your preferred color by performing step 3.

5

or

]Exit from the setting.

TUNER		• MONO OFF	stereo effect will be lost. (See page 2.)
			: Restore the stereo effect.
	IF BAND	• AUTO	: Increases the tuner selectivity to reduce interference
			noises between adjacent stations. (Stereo effect may be
		• WIDE	lost.)
			: Subject to interference noises from adjacent stations,
			but sound quality will not be degraded and the stereo
			effect will remain.
	BUTTON ZONE	COLOR 01 —	: For settings, see the right column.
COLOR		COLOR 29, USER
	DISP ZONE
	Display zone
	ALL ZONE
SETUP	DAY COLOR	• BUTTON ZONE	: For settings, see the right column.
		• DISP ZONE
	NIGHT COLOR
	MENU COLOR	• ON	: Changes the display and buttons (except for EQ/BASS-TRE
COLOR
			/ DISP) illumination during menu, list search and
		• OFF	playback mode operations.
			: Cancels.
	FADER *3	R06 – F06 [ 00 ]	: Adjust the front and rear speaker output balance.

Creating your own day and night colors—USER

You can create your own colors for <DAY COLOR> and <NIGHT COLOR> to apply to button zone and display zone.

• <DAY COLOR> Displayed when <DIMMER> is set to <DIMMER OFF>.

• <NIGHT COLOR> Displayed when <DIMMER> is set to <DIMMER ON>.

	Menu hierarchy		Operation
	DAY COLOR	• BUTTON ZONE	Follow example below.
COLOR		• DISP ZONE	Press BACK after step 5, then select DISP ZONE in step 2.
SETUP		• BUTTON ZONE	Press BACK after step 5, then select NIGHT COLOR in step 2.
	NIGHT COLOR
		• DISP ZONE

Ex.: Creating <USER> color for <BUTTON ZONE> in <DAY COLOR>.

1 [Hold] or [Hold] 4

		BALANCE *4	L06 – R06 [ 00 ]	: Adjust the left and right speaker output balance.
		LOUD	• LOUD ON	: Boost low and high frequencies to produce a well-
			• LOUD OFF	balanced sound at a low volume level.
				: Cancels.
		VOL ADJUST	VOL ADJ –05 —	: Preset the volume adjustment level of each source
			VOL ADJ +05	(except FM), compared to the FM volume level. The
			[ VOL ADJ 00 ]	volume level will automatically increase or decrease
				when you change the source.
				• Before making an adjustment, select the source you
				want to adjust.
				• “VOL ADJ FIX” appears on the display if “FM” is selected
				as the source.
	AUDIO	L/O MODE	• SUB.W	: Select if the REAR LINE OUT terminals are used for
			• REAR	connecting a subwoofer (through an external amplifier).
				: Select if the REAR LINE OUT terminals are used for
				connecting the speakers (through an external amplifier).
		SUB.W FREQ *5	• LOW	: Frequencies lower than 72 Hz are sent to the subwoofer.
			• MID	: Frequencies lower than 111 Hz are sent to the
			• HIGH	subwoofer.
				: Frequencies lower than 157 Hz are sent to the
				subwoofer.
		SUB.W LEVEL *5	SUB.W 00 —	: Adjust the subwoofer output level.
			SUB.W 08	[ SUB.W 04 ]
		BEEP	• BEEP ON	: Activates the keypress tone.
			• BEEP OFF	: Deactivates the keypress tone.
		AMP GAIN *6	• LOW POWER	: VOLUME 00 – VOLUME 30 (Select if the maximum power
				of each speaker is less than 50 W to prevent damaging
			• HIGH POWER	the speakers.)
				: VOLUME 00 – VOLUME 50
	SRC SELECT	AM *7	• AM ON	: Enable “AM” in source selection.
			• AM OFF	: Disable “AM” in source selection.
		AUX IN *8	• AUX ON	: Enable “AUX IN” in source selection.
			• AUX OFF	: Disable “AUX IN” in source selection.
*1	Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*2	Displayed only when the source is “FM.”
*3	If you are using a two-speaker system, set the fader level to “00.”
*4	This adjustment will not affect the subwoofer output.
*5	Displayed only when <L/O MODE> is set to <SUB.W>.
*6	The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER> with the volume level
	is set higher than “VOLUME 30.”
*7	Displayed only when any source other than “AM” is selected.
*8	Displayed only when any source other than “AUX IN” is selected.

2

] <COLOR SETUP> ] <DAY COLOR> ]

<BUTTON ZONE>

•Pressing COLOR in step 1 will enter zone selection menu (BUTTON ZONE / DISP ZONE) directly.

3

]Select a primary color.

RED j GREEN j BLUE j (back to the beginning)

]Adjust the level of the selected primary color.

00 to 31

5Repeat steps 3 and 4 to adjust other primary colors.

6

or

]Exit from the setting.

If “00” is selected for all the primary colors (as in step 4) for <DISP ZONE>, nothing appear on the display.

3