JVC KD-R516 Audio dealers To prevent short circuits, Remote lead, Lead of the unit, Connector

Page 4
Heat sink

Installation

This unit is designed to operate on 12 V DC, NEGATIVE ground

Prepare these before installation....

electrical systems. If your vehicle does not have this system, a

 

voltage inverter is required, which can be purchased at JVC car

 

audio dealers.

 

Warnings

•To prevent short circuits:

–Disconnect the battery’s negative terminal and make all electrical connections before installing the unit.

–Cover the terminals of the UNUSED leads with insulating tape.

• Be sure to ground this unit to the car’s chassis again after installation.

• Replace the fuse with one of the specified rating.

• Connect speakers with a maximum power of more than 50 W (impedance of 4 Ω to 8 Ω). Otherwise, change the <AMP GAIN> setting. (See “Menu operations” on page 3.)

• The heat sink becomes very hot after use. Be careful not to touch it when removing this unit.

Electrical connections

IMPORTANT: A custom wiring harness (separately purchased) which is suitable for your car is recommended for connection between the unit and your car.

• Consult your JVC car audio dealer or a company supplying kits for details.

PRECAUTIONS on power supply and speaker connections

•DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit will be seriously damaged.

•BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker wiring in your car.

Parts List

A Hard case

1

D Trim plate

1

B Control panel

1

E Power cord

1

C Sleeve

1

F Handles

2

The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits.

In-dash mounting

When you stand the unit, be careful not to damage the fuse on the rear.

Do the required electrical connections.

Install the unit at an angle of less than 30˚.

Connecting the external amplifier or subwoofer

 

Remote lead

 

To the blue (white stripe)

 

 

lead of the unit

 

 

Y-connector *1

Signal cord *1

Rear speakers or subwoofer

 

JVC Amplifier

 

Make the <L/O MODE> setting accordingly.

 

 

 

*2

(See “Menu operations” on page 3.)

 

 

 

*1

Not supplied for this unit.

 

 

*2

Firmly attach the ground wire to the metallic body or to the chassis of the car—to the

 

place uncoated with paint.

 

 

Rear ground terminal

15 A fuse

Steering wheel remote input

Antenna input

Reset the unit

Bend the appropriate tabs to hold the sleeve firmly in place.

When installing the unit without using the sleeve

Flat head screws (M5 × 8 mm)*

Pocket

Bracket*

* Not supplied for this unit.

Removing the unit

Release the rear section first...

Connect only the front speakers if your speaker system is two- speaker system.

 

White

Front speaker

White (black stripe)

(left)

 

 

Gray

Front speaker

Gray (black stripe)

(right)

 

 

Green

Rear speaker

Green (black stripe)

(left)

 

 

Purple

Rear speaker

Purple (black stripe)

(right)

 

Black

To the metallic body

 

 

or chassis of the car

 

Yellow*3

To a live terminal

 

(constant 12 V)

 

 

 

Ignition switch

Red

To an accessory

 

 

terminal

Fuse block

 

 

Blue

To the automatic antenna if any

 

(250 mA max.)

 

Blue (white stripe)

To the remote lead of other

 

 

equipment (200 mA max.)

*3 Before checking the operation of this unit prior to installation, this lead must be connected, otherwise the power cannot be turned on.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Initial setting To cancel the prohibition, repeat the same SSM Strong-station Sequential MemorySpace Station name * = Frequency =SSM *2 SSM 01 SSM 07 SSM 13Color R06 F06Connector Signal cord Rear speakers or subwoofer JVC AmplifierRed To an accessory Terminal Fuse block Blue Audio dealers To prevent short circuitsPlayback order is determined when the files are Turn off the power then on againThis unit does not work at all Reset the unit. See Check the cords and connectionsAM Tuner FM TunerKD-R516 / KD-R515 For safety How to read this manualTemperature inside the car Contents Setting the clock Canceling the display demonstrationInitial setting Preparing the remote controller RM-RK50 Replacing the lithium coin batteryBasic operations Main unitInput jack Detaches the panel Remote sensorListening to the radio Manual searchManual presetting FM/AM Selecting a preset stationUsing the remote controller Title assignmentListening to a disc Stopping playback and ejecting the discProhibiting disc ejection Selecting a track/folderStop playing and detaching the USB device Listening to the USB deviceTime = back to the beginning Connecting an external component to the AUX input jack Adjust the volumeListening to the other external components Portable audio player Etc Mm stereo mini plug not suppliedSelecting a preset sound mode Storing your own sound modeTone Boost = Bass Boost = User = back to the beginningMenu operations Selectable setting, Initial UnderlinedMenu item Menu item Selectable setting, Initial Underlined Mode An external amplifier Line outputFrequency Keytouch toneColor Button Zone / Disp Zone / ALL Zone Beginning Adjust the level of the selected primary color Creating your own day and night colors-USERMenu hierarchy Operation StepMaintenance More about this unit Basic operationsTuner operations Disc/USB operationsPlaying an MP3/WMA disc Playing MP3/WMA tracks from a USB deviceTroubleshooting Symptom Remedy/CauseUnit does not work at all Store stations manually Not workBack Nor ejectedDisc sound is sometimes InterruptedWma to non-MP3 or WMA tracks Display Folder that contains MP3/WMA tracksBack in the order you have IntendedSpecifications Power Requirement Operating Voltage Type Compact disc playerNon-contact optical pickup Semiconductor laserEN, TH In-dash mounting / การติดตั้งจอแบบ In-dash When installing the unit without using the sleeve / ่DC, Negative ground Precautions on power supply and speaker connections This unit does not work at all. Have you reset your unit?GET0634-005A How to read this manual Contents Canceling the display demonstration Preparing the remote controller RM-RK50 Basic operations Listening to the radio Manual presetting FM/AM Listening to a disc Listening to the USB device Listening to the other external components Selecting a preset sound mode Menu operations Menu item Selectable setting, Initial Underlined Mode SUB.W All zone Creating your own day and night colors-USER Maintenance More about this unit Playing an MP3/WMA disc Troubleshooting Disc cannot be played back Wma to non-MP3 or WMA tracks Specifications MP3/WMA EN, CT Removing the unit / 拆卸本機 In-dash mounting / 裝設、固定在儀表板內Part list / 零件清單 Recommanded for connection between the unit and your car Reset the unit. / 重置本機。 Antenna input / 天線輸入Signal cord / 信號導線 Ignition switch / 點火開關KD-R511 Battery Products European Union onlyContents Canceling the display demonstration Button When an FM stereo broadcast is hard to receive Frequency = Clock = back to BeginningStandby receptions Tracing the same programmeAutomatic station selection TA Standby ReceptionListening to a disc To the beginning This unit can play MP3/WMA files stored in a USB deviceFor more details about USB operations, 22 Mm stereo mini plug not supplied Portable audio player EtcInstalling the lithium coin battery CR2025 Using the remote controllerBefore using the remote controller Selecting a preset sound mode 000 24H/12H Hour Category Menu item MonoCategory Menu item Selectable setting, Initial Underlined Mode External amplifierWhile using a mobile phone TelephoneMuting AM*10All zone DAY Zone Color Disp Zone Center holder FM Radio Data System operations Playing an MP3/WMA disc Unit Supplying kits Unit does not work at allTracks on the CD-R/CD-RW Radio AM cannot be selectedAlternately on the display Disc cannot be played back Numbers, and a limited number of symbols A limited number of symbolsIntended Will be the first track/folder for playback DB Quieting DBf 1.8 μV/75 Ω Alternate Channel 65 dB Stereo Separation 40 dB MW TunerLW Tuner 50 μVCD Player Section USB Section General Having Trouble with operation? In-dash mounting / Montage encastré Removing the unit / Retrait de l’appareilVotre voiture Part list / Liste de piècesModified wiring 1 / Câblage modifié Original wiring / Câblage originalModified wiring 2 / Câblage modifié
Top Page Image Contents