JVC KD-R516, GET0634-001A, GET0634-005A, GET0633-001A Supplying kits Unit does not work at all

•Connect one USB mass storage class device to the unit at a time. Do not use a USB hub.

•If the connected USB device does not have the correct files, “CANNOT PLAY” appears.

•This unit can show Tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for MP3 files and for WMA files.

•This unit can play back MP3/WMA files meeting the conditions below:

–Bit rate of MP3/WMA: 32 kbps — 320 kbps

–Sampling frequency of MP3:

32 kHz, 44.1 kHz, 48 kHz (for MPEG-1) 16 kHz, 22.05 kHz, 24 kHz (for MPEG-2)

–Sampling frequency of WMA:

22.05kHz, 32 kHz, 44.1 kHz, 48 kHz

•This unit can play back MP3 files recorded in VBR (variable bit rate).

•The maximum number of characters for:

–Folder names : 32 characters

–File names : 32 characters

–MP3 Tag : 64 characters

–WMA Tag : 32 characters

•This unit can recognize a total of 5 000 files, 255 folders (255 files per folder including folder without unsupported files), and of 8 hierarchies.

•This unit does not support SD card reader.

•This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 500 mA.

•USB devices equipped with special functions such as data security functions cannot be used with the unit.

•Do not use a USB device with 2 or more partitions.

•This unit may not recognized a USB device connected through a USB card reader.

•This unit may not play back files in a USB device properly when using a USB extension cord.

•This unit cannot play back the following files:

–MP3 files encoded in MP3i and MP3 PRO format.

–MP3 files encoded in an inappropriate format.

–MP3 files encoded with Layer 1/2.

–WMA files encoded in lossless, professional, and voice format.

–WMA files which are not based upon Windows Media® Audio.

Troubleshooting

General

Symptom			Remedy/Cause
Sound cannot be heard from the	• Adjust the volume to the optimum level.
speakers.	• Make sure the unit is not muted/paused (			6).
	• Check the cords and connections.
“PROTECT” appears on the display	Check to be sure the terminals of the speaker leads
and no operations can be done.	are covered with insulating tape properly, then reset
	the unit (	3).
	If “PROTECT” does not disappear, consult your JVC
	IN-CAR ENTERTAINMENT dealer or a company
	supplying kits.
The unit does not work at all.	Reset the unit. (		3)

ENGLISH

23