JVC 0708DTSMDTJEIN CLK Disp *1, Clock H, Clock M, CLK ADJ *2 Auto, AF-REG *2, Af Reg, PTY-STBY *2

Indications	Item			Selectable settings, [reference page]
	(		: Initial)
DEMO	•	DEMO ON		: Display demonstration will be activated automatically if no
Display demonstration					operation is done for about 20 seconds, [5].
	•	DEMO OFF		:	Cancels.
CLK DISP *1	•	ON		: Clock time is shown on the display at all times when the power is
Clock display					turned off.
	•	OFF		: Cancels; pressing DISP will show the clock time for about
					5 seconds when the power is turned off, [5].
CLOCK H	0 – 23 (1 – 12)			[Initial: 0 (0:00)], [5].
Hour adjustment
CLOCK M	00 – 59			[Initial: 00 (0:00)], [5].
Minute adjustment
24H/12H	•	24H		:	See also page 5 for setting.
Time display mode	•	12H
CLK ADJ *2	•	AUTO		: The built-in clock is automatically adjusted using the CT (clock
Clock adjustment					time) data in the Radio Data System signal.
	•	OFF		:	Cancels.
AF-REG *2	•	AF		: When the currently received signals become weak, the unit
Alternative frequency/					switches to another station (the programme may differ from the
regionalization					one currently received), [9, 16].
reception					• The AF indicator lights up.
	• AF REG			: When the currently received signals become weak, the unit
					switches to another station broadcasting the same programme.
					• The AF and REG indicators light up.
	• OFF			:	Cancels.
PTY-STBY *2	OFF, PTY codes			Activates PTY Standby Reception with one of the PTY codes, [9].
PTY standby

*1 If the power supply is not interrupted by turning off the ignition key of your car, it is recommended that you select “OFF” to save the car’s battery.

*2 Only for FM Radio Data System stations.

ENGLISH

Continued on the next page

13