
ENGLISH
Basic Disc Operations
Before performing any operations, observe
the following...
•For DVD playback, change the Setup Menu setting (see page 43).
•If “
” appears on the monitor, the disc cannot accept the operation you have tried.
–In some cases, “
” is not display, but operations will not be accepted.
1 Insert a disc
The unit turns on, then draws the disc, and starts playback automatically.
•The monitor does not come out from its compartment if “AUTO OPEN/CLOSE” is set to “OFF” (see page 46).
If the monitor does not comes out...
•It takes several seconds for the unit to detect a disc type.
•If a disc menu appears, see page 25.
2 Adjust the volume
Volume level appears.
3 Operate the disc
:Selects the folder (only for MP3).
:Stops (see “Stopping play” on page 75).
•VCD/CD/MP3 playback will continue endlessly until you stop it.
: Starts playback.
:Pauses. To resume playback, press 3.
:Goes back to the beginning of the current chapter/track, then skips to the previous chapters/ tracks if pressed repeatedly.
:Skips to the following chapters/ tracks if pressed repeatedly.
To stop play and eject the disc:
Do not use the following discs:
Warped disc
Sticker | Sticker |
| |
| residue |
Disc
label
22