JVC KD-AV7010 manual Dual Mode Operations, Surround Mode Operations, Sound Mode iEQ Operations

Page 77

Dual Mode Operations

Adjusting AV OUTPUT volume

•This adjustment does not affect the volume level of the monitor inserted into the optional cradle (KV-CR100).

Surround Mode Operations

•Dolby Digital disc is not always encoded as multi-channel source. If it is not multi- channel encoded, “Dolby Digital” cannot be selected for surround mode.

Sound Mode (iEQ) Operations

•If you do not want to store your current adjustment, but only to apply the adjustment to the current playback source, press RETURN on the monitor screen to go back to the operation screen of the current source. Adjustment you made remains effective until you select a sound mode.

Other Sound Adjustments

•If fader or balance has been set close to its extreme, appropriate surround/DSP effect may not be obtained.

•If you are using a two-speaker system, set the fader level to “0.”

•You cannot adjust the input level—Volume Adjustment—of the FM stations. If the source is FM, Volume Adjustment will not be used.

Monitor Adjustments

•You may not able to adjust the brightness in the following case:

–You cannot make it brighter when the ambient light is very bright.

–You cannot make it darker when the ambient light is very dark.

Initial Setup—DVD MENU

MENU/AUDIO/SUBTITLE LANGUAGE

•When the language you have selected is not recorded on a disc, the original language is automatically used as the initial language. In addition, for some discs, the initial languages settings will not work as you set due to their internal disc programming.

•Language setting change cannot be effective while playing (or pausing). After you change the language setting, eject the disc and insert it (or another disc) again so that your setting takes effect.

MONITOR TYPE

•When you select “16:9 NORMAL” for a picture whose aspect ratio is 4:3, the picture slightly changes due to the process for converting the picture width.

•Even if “4:3 PS” is selected, the screen size may become “4:3 LB” with some DVDs. This depends on how they are recorded.

ENGLISH

77

Image 77

Contents KD-AV7010 For safety How to reset your unitTemperature inside the car Important for Laser ProductsEnglish How to read this manualContents Following discs cannot be played back Introduction-Playable DiscsDigital audio formats DTS ** Digital Theater SystemsRemote controller Quick Guide-How to Use the ControlsEnglish Buttons Main unit frontPreparation Remote Controller-RM-RK220 Operation Methods Ex. Fader/balance adjustmentTo erase and display the Touch Panel icons Ex. DVD playbackExamples Using the buttons and controls directlyTurn on the power Adjust the volumeBasic Operations Select the sourceWhen the unit is turned on Setting the clockWhile playing any source Set the clock timeChanging the touch panel color Changing the sourceChanging the graphic screen While playing a disc Displaying the level meterWhile listening to radio FM/AM Back to the beginning Radio OperationsWhen an FM stereo broadcast is hard to receive Select Search ModeSelect the Tuner Select a band FM/AM Tune in to a stationManual presetting FM station automatic presetting-SSMStoring stations in memory Strong-station Sequential MemoryTo store a station using the preset list To tune in to a preset stationDVD VCD DVD/VCD OperationsMP3 CD/MP3 OperationsCD/CD Text Before performing any operations, observe Following Insert a discOperate the disc On-screen guide icons Remote controller while playing a discTo resume normal speed, press To play back the still pictureChanging the aspect ratio On the remote controllerProhibiting disc ejection Selecting MP3 foldersWhile playing a DVD Operating the disc menuSelect an item, then confirm While playing a VCDZooming To cancel the PBC playbackReplaying the previous scenes Move the zoomed-in portion on the monitorSelecting audio languages Selecting subtitlesSelect a subtitle language you want Select an audio language you wantSelect a view angle you want Selecting multi-angle viewsList Locating a folder/track usingTo locate a track by displaying the track ListRepeat Play Displaying the disc textSelecting playback modes Random Play Searching for scenes or songsIntro Scan Title/Chapter/Folder/Track SearchExamples for DVD Enter a number, then confirmTime Search Example for VCD/CDTo activate Dual Mode and select the subsidiary source Dual Mode OperationsSelecting the sources Select the subsidiary source SUB you wantAdjust the AV output volume To cancel the Dual Mode, pressTo activate Dual Mode To operate the subsidiary sourceActivate and select the surround mode or DSP mode Surround Mode OperationsMake adjustment if you want to When surround mode is activated When DSP mode is activatedDolby Digital Surround modesDolby Digital 5.1 CH DTS Digital SurroundSurround On DSP Off DSP modeDSP On Surround Off Defeat Surround/DSP OffHall When DSP mode is activatedSound Modes iEQ Operations Available sound modes Select one of the preset sound iEQ ModesStoring your own sound modes Make adjustment as you like Other Sound AdjustmentsTo adjust the input level To adjust fader and balanceSelect an item to adjust Monitor AdjustmentsAdjustable items Adjust the itemSelect the item you want Initial Setup-DVD MenuChange the setting Audio Language Menu LanguageSubtitle Monitor TypeInitial Setup-MONITOR Blind Control Wiring CheckAuto OPEN/CLOSE Beep Tone Select the item you want Change the setting Initial Setup-ON ScreenGuide On Screen LanguageMessage ClockChange the setting or enter the setting screen Initial Setup-AUDIO MENU/PSMDynamic. Range Compression Auto SurroundSeat Position AMP Gain Speaker SizeCross Over AV2 Input Select Dimmer ModeFM if Filter Back GearAssigning titles to the sources Other Main FunctionsSelect an unwanted name Enter a name Confirm SourceStations Removing the monitor Changing the monitor position AngleCD Changer Operations Before operating your CD changer Basic CD Changer OperationsSelect CD-CH Operate the disc Advanced CD Changer Operations Locating a disc/folder/track using the listSelecting disc/folders/tracks Select a disc you wantTo locate a track by displaying the track list Displaying the disc text informationRepeat Play Track Folder/Track Search Searching for songsTo change the aspect ratio External Component OperationsSelect the external source TV Tuner Operations Watching TV programs TV station automatic presetting-Auto MemorySelect TV Tune in to a TV stationTune into a TV station Select a preset numberDisplaying the preset list Check your Sirius ID, see Turn on the power Select SAT SiriusSirius Radio Operations Back to the beginning Select SAT Sirius Listening to the Sirius RadioSelect a category Select a channel for listeningTo store a user preset channel using the list Listening to a user preset ChannelTo select a user preset channel using the list While listening to the channel you want To storeSkipping channels Selecting a category/channel using the listsWhile listening to a channel To select a category While listening to the 4th channel on ListClock Auto Adjust Changing the satellite setupSirius ID Time ZoneMaintenance Operation Methods More about This ReceiverBasic Operations Radio OperationsStopping play Changing the sourceEjecting a disc Displaying the disc text informationMP3 Control Surround Mode Operations Dual Mode OperationsSound Mode iEQ Operations Other Sound AdjustmentsSirius Radio Operations Other Main FunctionsTV Tuner Operations Assigning titles to the sourcesFM/AM broadcast TroubleshootingDisc playback-DVD/VCD Disc playback-CD/CD-R/CD-RWTV tuner operations Initial setup-AUDIO MENU/PSMDisc playback-MP3 Sirius radio operations CD changer operationsGraphic screens Preset iEQ modeAdditional Information Code Language Language CodesMain unit SpecificationsRequired space for the monitor ejection Hideaway unitAbout mistracking Removing the control panelCall Notas sobre la instalación de la unidad oculta Be sure to ground each unit to the car’s chassisNotas sobre las conexiones eléctricas Remarque sur le montage de l’appareil satelliteSystem Connections Conexiones DEL Sistema Installation Instalación Avant de commencer Before connectingAntes de la conexión Unused La unidad sin usar De l’appareil inutilisés Main unit Unidad principal Appareil principalKV-CR100 DLP JVC JVC DLP