JVC KD-R711 manual Using the Bluetooth device, Pairing a device, Bluetooth profile, KS-UBT1

Using the Bluetooth® device

Bluetooth is a short-range wireless radio communication technology for the mobile device such as mobile phones, portable PCs, and other devices. The Bluetooth devices can be connected without cables and communicate with each other.

•Refer to pages i and ii at the end of the manual to check the countries where you may use the Bluetooth® function.

Bluetooth profile

This unit supports the following Bluetooth profiles;

HFP (Hands-Free Profile) 1.5 ; OPP (Object Push Profile) 1.1 ; PBAP (Phonebook Access Profile)

1.0; A2DP (Advanced Audio Distribution Profile) 1.2 ; AVRCP (Audio/Video Remote Control Profile) 1.3

Refer also to the instructions supplied with the Bluetooth device.

Preparation:

•Connect the supplied USB Bluetooth Adapter (KS-UBT1) to one of the USB input terminals of the unit.

•Operate the device to turn on its Bluetooth function.

~		] Turn on the power.
Ÿ	USB input terminal	KS-UBT1	USB cable from the
			rear of the unit

or

Only one USB Bluetooth Adapter can be detected at a time.

Pairing a device

When you connect a Bluetooth device to the unit for the first time, make pairing between the unit and the device.

•Once the connection is established, it is registered in the unit even if you reset the unit. Up to five devices can be registered in total.

•Only one device for Bluetooth phone and one for Bluetooth audio can be connected at a time.

ENGLISH

13

EN12-21_KD-R711_003A_5.indd 13

12/17/09 5:24:04 PM