JVC KD-R711 manual Standby receptions, Tracing the same programme, Automatic station selection

Page 9

Standby receptions

TA Standby Reception

TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM.

The volume changes to the preset TA volume level if the current level is lower than the preset level. (<TA VOLUME>, 25)

To activate TA Standby Reception

If the TP indicator lights up, TA Standby Reception is activated. If the TP indicator flashes, TA Standby Reception is not yet activated.

To activate the reception, tune in to another station providing Radio Data System signals required for TA Standby Reception.

To deactivate the reception, press T/P BACK again.

Tracing the same programme—

Network-Tracking Reception

When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM Radio Data System station of the same network, possibly broadcasting the same programme with stronger signals.

Programme A broadcasting on different frequency areas (01 – 05)

To change the Network-Tracking Reception setting, see <AF-REG> ( 25).

PTY Standby Reception

PTY Standby Reception allows the unit to switch temporarily to your favourite PTY programme from any source other than AM.

To activate and select your favourite PTY code for PTY Standby Reception, see <PTY-STANDBY> ( 25)

If the PTY indicator lights up, PTY Standby Reception is activated.

If the PTY indicator flashes, PTY Standby Reception is not yet activated.

To activate the reception, tune in to another station providing these signals.

To deactivate the reception, select <PTY OFF> ( 25) for the PTY code. The PTY indicator goes off.

The unit will not switch to Traffic Announcement or PTY programme when a call connection is established through “BT-PHONE.”

Automatic station selection—

Programme Search

Usually when you select a preset number, the station preset in that number is tuned in.

If the signals from the FM Radio Data System preset station are not sufficient for good reception, this unit, using the AF data, tunes in to another frequency possibly broadcasting the same programme as the original preset station is broadcasting. (<P-SEARCH>, 25)

Changing the display information

Station name (PS) = Station Frequency = Programme type (PTY) = Clock = (back to

the beginning)

EN02-11_KD-R711_003A_5.indd 9

ENGLISH

9

12/17/09 5:23:54 PM

Image 9
Contents English Français Vous avez des Problèmes de fonctionnement?Temperature inside the car For safetyBattery Products European Union onlyContents Setting the clock Canceling the display demonstrationInitial setting Initial settingPreparing the remote controller RM-RK50 Replacing the lithium coin batteryInsulation sheet Main unit Basic operationsManual search General operationSelecting a preset station Manual presetting FM/AMUsing the remote controller Changing the display informationTracing the same programme Standby receptionsAutomatic station selection TA Standby ReceptionStopping playback and ejecting the disc Listening to a discProhibiting disc ejection Selecting a folder/track on the listSelecting the playback modes Listening to the USB deviceDetaching the USB device Stopping playback and detaching the USB devicePairing a device Using the Bluetooth deviceBluetooth profile Only one USB Bluetooth Adapter can be detected at a timeBluetooth Delete Pair Bluetooth NEW PairingDeleting a registered device Display result Hands AudioDisconnt AU Making a callHow to delete name/phone number How to enter phone numberSelecting a contact from the phonebook Receiving a callSwitching the connected mobile phone Switching conversation media the unit/ mobile phoneWhen Auto Answer is activated Arriving of a text messageRepeat Track Bluetooth SettingsALL GroupSelectable setting, Initial Underlined Listening to the iPod/iPhone Operations explained below are under Head ModeSongs j Podcasts j Selecting a track from the menuGenres j Composers j BeginningRepeat ONE RPT Listening to the other external componentsALL RPT Album name/performer = Track title =Storing your own sound mode Selecting a preset sound modeConnecting an external component to the AUX input jack ToneMenu operations Menu item Selectable setting, Initial UnderlinedVolume TA VOLUME*5AF-REG*5 AF-REG onMode SUB.W VOL AdjustFader *7 Balance *8General Basic operationsFM Radio Data System operations Disc/USB operationsPlaying a CD-R or CD-RW If the ejected disc is not removed withinPlaying MP3/WMA/WAV tracks from a USB device Playing an MP3/WMA discWMA WAVThis unit may not work for some Bluetooth devices Bluetooth operationsIPod/iPhone operations This unit can display up to 128 characters Ascii codeMaintenance Symptom Remedy/Cause TroubleshootingJoliet A limited number of symbols Noise is generatedNames Noise is generated WMA tracksSearch from the Bluetooth device again A limited number of symbolsReduce the distance between the unit Bluetooth mobile phone Signal receptionYou speak the name Reset the iPod/iPhoneOr does not work Sound is distortedSpecifications MP3/WMA/WAV Avertissement Précautions sur le réglage du volumePour sécurité Température à l’intérieur de la voiture