JVC KD-R711 manual Selectable setting, Initial Underlined

Setting item		Selectable setting, [Initial: Underlined]
AUTO CNNCT	• LAST		: The connection is established automatically with the last
			connected Bluetooth device when you turn on the unit.
	• OFF		: The unit does not connect the Bluetooth device
			automatically. Connect the device manually. (			15)
AUTO	• ON		: The unit answers the incoming calls automatically.
ANSWER	• OFF		: The unit does not answer the calls automatically. Answer
			the calls manually. (		16, 17)
MSG NOTICE	• ON		: The unit informs you of the arrival of a message by
			ringing and displaying “RCV MESSAGE.”
	• OFF		: The unit does not inform you of the arrival of a message.
MIC LEVEL	—		: Adjust the volume of the microphone connected to the
			unit. [ LEVEL 01/02/03 ]
NR/EC MODE	• ON		: The unit adjusts the Noise Reduction and Echo
			Cancelation of the microphone connected to the unit for
	• OFF		clearer sound.
			: Cancels.
RING TONE	• IN UNIT		: The unit rings to alert you when a call/Text Message
			comes in.
			CALL:	Select your preferred ring tone when a call
				comes in. [ TONE 1/2/3 ]
			MESSAGE: Select your preferred ring tone when a Text
	• IN PHONE			Message comes in. [ TONE 1/2/3 ]
			: The unit rings (using the connected phones’ ring tone)
			to alert you when a call/Text Message comes in. (The
			connected mobile phone rings if it does not support this
			feature.)
P. BOOK SEL*1	• PB IN PHONE		: The unit browses the phonebook of the connected
			phone.
	• PB IN UNIT		: The unit browses the phonebook registered in the unit.
P. BOOK WAIT	—		: You can copy the phonebook memory of a mobile
			phone into the unit (via OPP).
			Enter the PIN code to the unit to transfer the phonebook
			into the unit. You can transfer a maximum of 400 numbers.
INITIALIZE	• YES		: Initialize all the Bluetooth settings (including stored
			pairing, phonebook, and etc.).
	• NO		: Cancels.
INFORMATION	• MY BT NAME		: Shows the unit name.
	• MY ADDRESS		: Shows address of USB Bluetooth Adapter.
	• BT SW VER		: Shows the software version.
	• PH CNNT DEV*2		: Shows connected phone name.
	• AU CNNT DEV*2		: Shows connected audio device name.

*1	Selectable only when the connected phone supports PBAP.
*2	Displayed only when a Bluetooth phone/audio player is connected.
	ENGLISH	19

EN12-21_KD-R711_003A_5.indd 19

12/17/09 5:24:06 PM