~ |
| ] Turn on the power. |
|
Ÿ | USB input terminal | USB memory | USB cable from the |
| rear of the unit | ||
|
|
| |
|
|
| and / or |
All tracks will be played repeatedly until you change the source or detach the USB device.
If you have turned off the power (without
detaching the USB device)...
Pressing 
/SOURCE turns on the power and playback starts from where it has been stopped previously.
•If a different USB device is currently attached, playback starts from the beginning.
Stopping playback and detaching the USB device
Straightly pull it out from the unit.
“NO USB” appears. Press 
/SOURCE to listen to another playback source.
You can operate the USB device in the same way you operate the files on a disc. (
10, 11)
•You can listen to WAV files by following the MP3/WMA file operations. (
10, 11)
Cautions:
•Avoid using the USB device if it might hinder your safety driving.
•While “READING” is shown on the display:
•Do not start the car engine if a USB device is connected.
•This unit may not be able to play the files depending on the type of USB device.
•Operation and power supply may not work as intended for some USB devices.
•You cannot connect a computer to the USB input terminal of the unit.
•Make sure all important data has been backed up to avoid losing the data.
•Electrostatic shock at connecting a USB device may cause abnormal playback of the device. In this case, disconnect the USB device then reset this unit and the USB device.
•Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or cause damages to the device.
•Some USB devices may not work immediately after you turn on the power.
•The detect time and response time may be very long for some USB devices (such as Digital Audio Player, etc.).
•For more details about USB operations,
29, 30.
12
ENGLISH
12/17/09 5:24:04 PM