
OPTIONAL BRICK LINER INSTALLATION INSTRUCTIONS
BRICK LINER KIT
DVS-BL-30-2, DVS- BL-36-2, DVS-BL-42-2
INSTALLING OPTIONAL BRICK LINER
1.If installed, turn OFF gas supply to fireplace.
2.If installed, remove logs from fireplace.
3.The back panel is to be installed before the side panels. Place back panel against the rear wall in fireplace.
4.Remove combustion dome diverter from interior, top of firebox by removing three (3) 10 x 1/2" screws.
5.Place one side panel against the side wall in fireplace. Align the brick pattern on back panel and side panel.
6.To install the brick panel (Z) bracket you must first remove the top and bottom screw on the side of the inner casing front as it attaches to the outer casing. Now, place the brick panel (Z) bracket over the front edge of the side panel. The clearance holes on the brick panel (Z) bracket will align with the top and bottom screw holes on the side of the inner casing front.
Reattach the top and bottom screws through the clearance holes on the brick panel (Z) bracket and into the inner casing front.
7.Repeat Step 5 and Step 6 to attach the second side panel to fireplace.
8.Attach combustion dome diverter into interior, top of firebox with three (3) 10 x 1/2" screws from Step 4.
9.Installation of optional simulated brick panels is completed
SIDE PANEL | SIDE PANEL |
BACK PANEL
Z BRACKET
PARTS LIST
Part Description | Kit Number | Kit Number | Kit Number | Quantity |
| Supplied | |||
Brick Panel (Z) Bracket | 11573 | 10990 | 10991 | 2 |
|
|
|
|
|
Brick Panel - Right | 1 | |||
Brick Panel - Left | 1 | |||
|
|
|
|
|
Brick Panel - Back | 1 |
Part Description | Kit Number | Kit Number | Kit Number | Quantity |
| Supplied | |||
|
|
|
|
|
Brick Panel (Z) Bracket | 11573 | 10990 | 10991 | 2 |
Brick Panel - Right | 1 | |||
|
|
|
|
|
Brick Panel - Left | 1 | |||
Brick Panel - Back | 1 |
| PH: |
Empire Comfort Systems, Inc. | FAX: |
Nine Eighteen Freeburg Ave. | |
Belleville, Illinois | WEB SITE: www.empirecomfort.com |
Page 52 |