DVS 30-2 Locating Fireplace, Mantel Chart Figure, Figure Clearances Figure

CLEARANCES

CLEARANCES TO COMBUSTIBLES

BACK SPACER	0" (0MM)
SIDE SPACER	0" (0MM)
FLOOR	0" (0MM)
TOP STAND OFF	0" (0MM)
TOP FRAMING LEDGE	0" (0MM)

Mantel Chart (Figure 6)											MANTEL
							12" (305mm)
								10" (254mm)
12 3/4"									8" (203mm)
(324mm)
12"										6" (152mm)
	(305mm)			10 1/2"						4" (102mm)
			(267mm)
11 1/4"						9 3/4"
											2 1/2"(64mm)
		(286mm)			(248mm)
								9"
								(229mm)

TOP EDGE OF FIREPLACE

SEE MANTLE CHART FOR MAXIMUM MANTLE

DEPTH

SEE MANTLE CHART FOR MINIMUM HEIGHT OF MANTLE ABOVE UNIT

FINISHED WALL

TOP FRAMING

LEDGE

2" x 4" HEADER

STAND OFF

3" (76mm) HEIGHT

ABOVE TOP OF FIREPLACE

ADJUSTABLE

NAILING

FLANGES

Figure 6

Clearances (Figure 7)

Clearance from top of fireplace to ceiling is 36" Clearance from side of fireplace to adjacent sidewall is 6".

GLASS FRONT

Figure 5

Combustible Material

No greeting cards, stockings or ornamentation of any type should be placed on or attached to the fireplace. The flow of heat can ignite combustibles.

Figure 7

LOCATING FIREPLACE

Note:** Island (C) and Room Divider (D) installation is possible as long as the horizontal portion of the vent system (H) does not exceed 20 feet with a minimum vertical run of 8 feet. See details in Venting Section.

*When you install your Direct Vent
Fireplace in (D) Room divider or
(E) Flat on wall corner positions, a
minimum of 6 inches clearance
must be maintained from the
perpendicular wall and the front
edge of the appliance.	Figure 8

Page 8 13369-1-0203