JVC KS-LX200R manual Setting the TA volume level, Automatic clock adjustment

Page 14

ENGLISH

Changing the display mode while listening to an FM station

You can change the initial indication on the display to either station name (PS NAME) or to station frequency (FREQ), while listening to an FM RDS station.

•See also “Changing the general settings (PSM)” on page 21.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 to select “TU DISP” (tuner display).

3 Press + or – to set to the desired indication (“PS NAME” or “FREQ”).

Note:

By pressing DISP, you can also change the display while listening to an FM RDS station.

Each time you press the button, the following information appears on the display:

Station name

(PS NAME)

Station Frequency

(FREQ)

Programme type

(PTY)

•Then, the display goes back to the original indication in several seconds.

Setting the TA volume level

You can preset the volume level for TA Standby Reception. When a traffic programme is received, the volume level automatically changes to the preset level.

•See also “Changing the general settings (PSM)” on page 21.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 to select “TA VOL.” 3 Press + or – to set to the desired volume.

You can set it from “VOL 00” to “VOL 50.”

Automatic clock adjustment

When shipped from the factory, the clock built in this unit is set to be readjusted automatically using the CT (Clock Time) data in the RDS signal.

If you do not want to use automatic clock adjustment, follow the procedure below.

•See also “Changing the general settings (PSM)” on page 21.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 to select “AUTO ADJ.” 3 Press – to select “ADJ OFF.”

Now automatic clock adjustment is canceled.

To reactivate clock adjustment, repeat the same procedure and select “ADJ ON” in step 3 by pressing +.

Note:

It takes about 2 minutes to adjust the time using the CT data. So, you should not change the station for more than 2 minutes continuously; otherwise, the clock time will not be adjusted.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents KS-LX200R FSUN3148-311 EContents Front panel How to use the number buttonsLocation of the Buttons To activate the display demonstrationRemote controller Remove the battery holder Installing the batteryReturn the battery holder Place the batteryBasic Operations To drop the volume in a momentTo turn off the power Searching a station automatically Auto search Radio Basic OperationsListening to the radio Searching a station manually Manual searchFM1 FM2 FM3 FM station automatic preset SSMStoring stations in memory Tune into a station of 88.3 MHz Manual presetSelect the band FM1 RDS Operations ModePTY Standby Reception Using Standby ReceptionTA Standby Reception To deactivate the TA standby mode, pressSearching your favorite programme PTY codesOther convenient RDS functions and adjustments Last selected PTY code Preset number appearChanging the display mode while listening to an FM station Setting the TA volume levelAutomatic clock adjustment To fast-forward and rewind a tape Listening to a tapeTo stop play and eject the cassette Select the tape directionTo play back tapes recorded with the Dolby B NR To cancel the Dolby B NR, repeat the aboveProhibiting tape ejection During playbackPlaying the current tune repeatedly Press SEL select to finish the settingPress Mode ATT while playing a Skipping the blank portions on the tapeAdjust the level Sound AdjustmentsAdjusting the sound Select the item you want to adjustPress Mode ATT Using the Sound Control MemoryWhat is BBEII? Select the sound mode you wantRepeat the same procedure to adjust other sound modes Storing your own sound adjustmentsTo reset to the factory settings For Preset valuesBasic Procedure Setting the clockChanging the general settings PSM Other Main FunctionsPreferred Setting Mode PSM items To set the clock display Clock To cancel Advanced SCM SCM LinkTo select the dimmer mode Dimmer To select the level meter LevelTo change the FM tuner selectivity Filter To adjust the line input level Line ADJTo turn on/off the key-touch tone Beep Flat OFF You can use the control panel normallyHow to Use the Provided Code Sticker Using the security lockRegistering the password Unit enters password entry modeWhen Security Lock works? To change the passwordTo fast-forward or reverse the track CD Changer OperationsPlaying CDs Select the CD automatic changer CD-CHTo play back tracks repeatedly Repeat Play CanceledTo go to a particular disc directly RPTSelect the external component EXT- Line Playing an external component Using a subwooferTo adjust the subwoofer output volume, see Operate the external componentDAB Tuner Operations Tuning into an ensemble and one of the servicesWhat is DAB system? To tune in a particular ensemble without searching Storing DAB services in memoryService name Ensemble name Channel number Frequency Press Source Band to select DAB tuner as the sourcePress and hold the number button Tuning into a preset DAB serviceSelected service into for more than SecondsYou can keep listening to the same program While receiving a DAB serviceTo use Alternative Reception While receiving an FM RDS stationReset button of the CD changer TroubleshootingSymptoms Causes Remedies News Advice on a wide varietyProgrammes where people can Topical programmes expandingTo keep the tape clean MaintenanceTo clean the heads Ignition key-off release/Ignition key-on playMW Tuner SpecificationsFM Tuner LW TunerHaving Trouble with operation? Nach ihrer Überprüfung, die Teile richtig einsetzen Pile CR2025Be sure to keep the handles after installing it Die Griffe nach dem Einbau auf jeden Fall aufbewahrenBlau mit weißem Streifen To power aerial if any Cut the ISO connector Den ISO-Stecker AbschneidenTo subwoofer see diagram C Zum Subwoofer siehe Schaltplan C To car light control switchUnit becomes hot Fuse blowsSound is distorted Die Sicherung brennt durchEnglish Nederlands GET0037-001A
Related manuals
Manual 21 pages 46.39 Kb

KS-LX200R specifications

The JVC KS-LX200R is a versatile car audio receiver that combines advanced technology with user-friendly features, ensuring an elevated listening experience for audiophiles and casual listeners alike. This model is celebrated for its sleek design and powerful performance, making it an ideal addition to any vehicle.

One of the standout features of the KS-LX200R is its high-performance audio technology. It boasts a built-in amplifier capable of delivering up to 50 watts per channel, producing crystal-clear sound with minimal distortion. The unit supports various digital audio formats, allowing for compatibility with a wide range of media sources. Additionally, the receiver is equipped with a 13-band equalizer, enabling users to fine-tune the audio output to match their personal preferences and optimize sound quality according to the car’s acoustics.

Connectivity is at the forefront of the KS-LX200R's design. It features Bluetooth technology for hands-free calling and seamless wireless audio streaming from smartphones and other Bluetooth-enabled devices. The ability to pair multiple devices ensures that passengers can easily share their favorite music without tedious reconnections. Furthermore, the receiver includes USB and AUX inputs, giving users additional options for connecting their devices.

The KS-LX200R also accommodates various media formats, including CD, MP3, and WMA playback, ensuring that users can enjoy their entire library of audio content. The convenient front-facing USB port supports charging while listening, making it practical for long drives.

In terms of visual appeal, the KS-LX200R features a vibrant LCD display that provides clear visibility of track information and settings, even in bright sunlight. The user interface is intuitively designed, allowing quick access to various functions and settings, enhancing the overall user experience.

Moreover, the JVC KS-LX200R is built with durability in mind. It is designed to withstand the rigors of daily use in a vehicle environment while maintaining optimal performance. The receiver is compatible with steering wheel control interfaces, enabling users to operate the unit without taking their hands off the wheel for added safety.

Overall, the JVC KS-LX200R stands out as a feature-rich car audio receiver that seamlessly blends quality sound, modern convenience, and robust build quality, making it an excellent choice for any automotive sound system upgrade.
Top Page Image Contents