JVC KS-LX200R Playing an external component Using a subwoofer, Operate the external component

Page 29

EXTERNAL COMPONENT OPERATIONS

Playing an external component Using a subwoofer

When connecting an external component to the LINE IN plugs on the rear, you can select the component as the sound source.

1 Select the external component (EXT– LINE IN).

Each time you press the button, the source changes as described on page 6.

2 Operate the external component.

Note:

For the external component connection, see the

Installation/Connection Manual (separate volume.)

By connecting a subwoofer to the SUBWOOFER OUT plugs on the rear, you can enjoy enhanced bass sounds and a more realistic theater atmosphere in your car.

•Refer also to the instructions supplied with your subwoofer.

When a subwoofer is connected to this unit, select an appropriate cutoff frequency level for your subwoofer. When shipped from the factory, the subwoofer cutoff frequency is set to “MID”.

To set the subwoofer cutoff frequency, follow the procedure below.

•See also “Changing the general settings (PSM)” on page 21.

•LOW: Frequencies higher than 50 Hz are cut off to the subwoofer.

•MID: Frequencies higher than 80 Hz are cut off to the subwoofer.

•HIGH: Frequencies higher than 120 Hz are cut off to the subwoofer.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 repeatedly until “CUTOFF F” (frequency) appears on the display.

3Press + or – to select the desired cutoff frequency.

4Press SEL (select) again to finish the setting.

To adjust the subwoofer output volume, see

“Adjusting the sound” on page 18.

ENGLISH

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents FSUN3148-311 E KS-LX200RContents Location of the Buttons How to use the number buttonsFront panel To activate the display demonstrationRemote controller Return the battery holder Installing the batteryRemove the battery holder Place the batteryBasic Operations To drop the volume in a momentTo turn off the power Listening to the radio Radio Basic OperationsSearching a station automatically Auto search Searching a station manually Manual searchFM1 FM2 FM3 FM station automatic preset SSMStoring stations in memory Tune into a station of 88.3 MHz Manual presetSelect the band FM1 Mode RDS OperationsTA Standby Reception Using Standby ReceptionPTY Standby Reception To deactivate the TA standby mode, pressPTY codes Searching your favorite programmeLast selected PTY code Preset number appear Other convenient RDS functions and adjustmentsChanging the display mode while listening to an FM station Setting the TA volume levelAutomatic clock adjustment To stop play and eject the cassette Listening to a tapeTo fast-forward and rewind a tape Select the tape directionProhibiting tape ejection To cancel the Dolby B NR, repeat the aboveTo play back tapes recorded with the Dolby B NR During playbackPress Mode ATT while playing a Press SEL select to finish the settingPlaying the current tune repeatedly Skipping the blank portions on the tapeAdjusting the sound Sound AdjustmentsAdjust the level Select the item you want to adjustWhat is BBEII? Using the Sound Control MemoryPress Mode ATT Select the sound mode you wantTo reset to the factory settings Storing your own sound adjustmentsRepeat the same procedure to adjust other sound modes For Preset valuesChanging the general settings PSM Setting the clockBasic Procedure Other Main FunctionsPreferred Setting Mode PSM items To select the dimmer mode Dimmer To cancel Advanced SCM SCM LinkTo set the clock display Clock To select the level meter LevelTo turn on/off the key-touch tone Beep To adjust the line input level Line ADJTo change the FM tuner selectivity Filter Flat OFF You can use the control panel normallyRegistering the password Using the security lockHow to Use the Provided Code Sticker Unit enters password entry modeTo change the password When Security Lock works?Playing CDs CD Changer OperationsTo fast-forward or reverse the track Select the CD automatic changer CD-CHTo go to a particular disc directly CanceledTo play back tracks repeatedly Repeat Play RPTTo adjust the subwoofer output volume, see Playing an external component Using a subwooferSelect the external component EXT- Line Operate the external componentDAB Tuner Operations Tuning into an ensemble and one of the servicesWhat is DAB system? Service name Ensemble name Channel number Frequency Storing DAB services in memoryTo tune in a particular ensemble without searching Press Source Band to select DAB tuner as the sourceSelected service into for more than Tuning into a preset DAB servicePress and hold the number button SecondsTo use Alternative Reception While receiving a DAB serviceYou can keep listening to the same program While receiving an FM RDS stationReset button of the CD changer TroubleshootingSymptoms Causes Remedies Programmes where people can Advice on a wide varietyNews Topical programmes expandingTo clean the heads MaintenanceTo keep the tape clean Ignition key-off release/Ignition key-on playFM Tuner SpecificationsMW Tuner LW TunerHaving Trouble with operation? Pile CR2025 Nach ihrer Überprüfung, die Teile richtig einsetzenDie Griffe nach dem Einbau auf jeden Fall aufbewahren Be sure to keep the handles after installing itTo subwoofer see diagram C Zum Subwoofer siehe Schaltplan C Cut the ISO connector Den ISO-Stecker AbschneidenBlau mit weißem Streifen To power aerial if any To car light control switchSound is distorted Fuse blowsUnit becomes hot Die Sicherung brennt durchGET0037-001A English Nederlands
Related manuals
Manual 21 pages 46.39 Kb

KS-LX200R specifications

The JVC KS-LX200R is a versatile car audio receiver that combines advanced technology with user-friendly features, ensuring an elevated listening experience for audiophiles and casual listeners alike. This model is celebrated for its sleek design and powerful performance, making it an ideal addition to any vehicle.

One of the standout features of the KS-LX200R is its high-performance audio technology. It boasts a built-in amplifier capable of delivering up to 50 watts per channel, producing crystal-clear sound with minimal distortion. The unit supports various digital audio formats, allowing for compatibility with a wide range of media sources. Additionally, the receiver is equipped with a 13-band equalizer, enabling users to fine-tune the audio output to match their personal preferences and optimize sound quality according to the car’s acoustics.

Connectivity is at the forefront of the KS-LX200R's design. It features Bluetooth technology for hands-free calling and seamless wireless audio streaming from smartphones and other Bluetooth-enabled devices. The ability to pair multiple devices ensures that passengers can easily share their favorite music without tedious reconnections. Furthermore, the receiver includes USB and AUX inputs, giving users additional options for connecting their devices.

The KS-LX200R also accommodates various media formats, including CD, MP3, and WMA playback, ensuring that users can enjoy their entire library of audio content. The convenient front-facing USB port supports charging while listening, making it practical for long drives.

In terms of visual appeal, the KS-LX200R features a vibrant LCD display that provides clear visibility of track information and settings, even in bright sunlight. The user interface is intuitively designed, allowing quick access to various functions and settings, enhancing the overall user experience.

Moreover, the JVC KS-LX200R is built with durability in mind. It is designed to withstand the rigors of daily use in a vehicle environment while maintaining optimal performance. The receiver is compatible with steering wheel control interfaces, enabling users to operate the unit without taking their hands off the wheel for added safety.

Overall, the JVC KS-LX200R stands out as a feature-rich car audio receiver that seamlessly blends quality sound, modern convenience, and robust build quality, making it an excellent choice for any automotive sound system upgrade.
Top Page Image Contents