JVC KS-LX200R manual Basic Operations, To drop the volume in a moment, To turn off the power

Page 6

ENGLISH

BASIC OPERATIONS

1

3

2

Turning on the power

3 Adjust the volume.

1

2

Turn on the power.

The display illuminates and the control panel comes out.

Select the source.

Each time you press the button, the source changes as follows:

=FM = DAB tuner** =Tape*

=CD changer** = External component

=AM = (back to the beginning)

*If a cassette is not in the cassette compartment, you cannot select tape as the source to play.

**Without connecting the CD changer and/or the DAB tuner, you cannot select it as the source to play.

Press + to increase the volume.

Press – to decrease the volume.

Volume level meter

4 Adjust the sound as you want (see page 18.)

To drop the volume in a moment

Press MODE ATT for more than 1 second while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment. To resume the previous volume level, press the button for more than 1 second again.

To operate the tuner (FM or AM), see pages 7 – 14.

To operate the tape, see pages 15 – 17. To operate the CD changer,

see pages 27 – 28.

To operate the external component connected to the LINE IN plugs, see page 29.

To operate the DAB tuner, see pages 30 – 33.

To turn off the power

Press and hold 0 OFF until “SEE YOU” appears

on the display.

Note:

When you use this unit for the first time, set the built-in

clock correctly, see page 21.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents KS-LX200R FSUN3148-311 EContents Front panel How to use the number buttonsLocation of the Buttons To activate the display demonstrationRemote controller Remove the battery holder Installing the batteryReturn the battery holder Place the batteryTo drop the volume in a moment To turn off the powerBasic Operations Searching a station automatically Auto search Radio Basic OperationsListening to the radio Searching a station manually Manual searchFM station automatic preset SSM Storing stations in memoryFM1 FM2 FM3 Manual preset Select the band FM1Tune into a station of 88.3 MHz RDS Operations ModePTY Standby Reception Using Standby ReceptionTA Standby Reception To deactivate the TA standby mode, pressSearching your favorite programme PTY codesOther convenient RDS functions and adjustments Last selected PTY code Preset number appearSetting the TA volume level Automatic clock adjustmentChanging the display mode while listening to an FM station To fast-forward and rewind a tape Listening to a tapeTo stop play and eject the cassette Select the tape directionTo play back tapes recorded with the Dolby B NR To cancel the Dolby B NR, repeat the aboveProhibiting tape ejection During playbackPlaying the current tune repeatedly Press SEL select to finish the settingPress Mode ATT while playing a Skipping the blank portions on the tapeAdjust the level Sound AdjustmentsAdjusting the sound Select the item you want to adjustPress Mode ATT Using the Sound Control MemoryWhat is BBEII? Select the sound mode you wantRepeat the same procedure to adjust other sound modes Storing your own sound adjustmentsTo reset to the factory settings For Preset valuesBasic Procedure Setting the clockChanging the general settings PSM Other Main FunctionsPreferred Setting Mode PSM items To set the clock display Clock To cancel Advanced SCM SCM LinkTo select the dimmer mode Dimmer To select the level meter LevelTo change the FM tuner selectivity Filter To adjust the line input level Line ADJTo turn on/off the key-touch tone Beep Flat OFF You can use the control panel normallyHow to Use the Provided Code Sticker Using the security lockRegistering the password Unit enters password entry modeWhen Security Lock works? To change the passwordTo fast-forward or reverse the track CD Changer OperationsPlaying CDs Select the CD automatic changer CD-CHTo play back tracks repeatedly Repeat Play CanceledTo go to a particular disc directly RPTSelect the external component EXT- Line Playing an external component Using a subwooferTo adjust the subwoofer output volume, see Operate the external componentTuning into an ensemble and one of the services What is DAB system?DAB Tuner Operations To tune in a particular ensemble without searching Storing DAB services in memoryService name Ensemble name Channel number Frequency Press Source Band to select DAB tuner as the sourcePress and hold the number button Tuning into a preset DAB serviceSelected service into for more than SecondsYou can keep listening to the same program While receiving a DAB serviceTo use Alternative Reception While receiving an FM RDS stationTroubleshooting Symptoms Causes RemediesReset button of the CD changer News Advice on a wide varietyProgrammes where people can Topical programmes expandingTo keep the tape clean MaintenanceTo clean the heads Ignition key-off release/Ignition key-on playMW Tuner SpecificationsFM Tuner LW TunerHaving Trouble with operation? Nach ihrer Überprüfung, die Teile richtig einsetzen Pile CR2025Be sure to keep the handles after installing it Die Griffe nach dem Einbau auf jeden Fall aufbewahrenBlau mit weißem Streifen To power aerial if any Cut the ISO connector Den ISO-Stecker AbschneidenTo subwoofer see diagram C Zum Subwoofer siehe Schaltplan C To car light control switchUnit becomes hot Fuse blowsSound is distorted Die Sicherung brennt durchEnglish Nederlands GET0037-001A
Related manuals
Manual 21 pages 46.39 Kb

KS-LX200R specifications

The JVC KS-LX200R is a versatile car audio receiver that combines advanced technology with user-friendly features, ensuring an elevated listening experience for audiophiles and casual listeners alike. This model is celebrated for its sleek design and powerful performance, making it an ideal addition to any vehicle.

One of the standout features of the KS-LX200R is its high-performance audio technology. It boasts a built-in amplifier capable of delivering up to 50 watts per channel, producing crystal-clear sound with minimal distortion. The unit supports various digital audio formats, allowing for compatibility with a wide range of media sources. Additionally, the receiver is equipped with a 13-band equalizer, enabling users to fine-tune the audio output to match their personal preferences and optimize sound quality according to the car’s acoustics.

Connectivity is at the forefront of the KS-LX200R's design. It features Bluetooth technology for hands-free calling and seamless wireless audio streaming from smartphones and other Bluetooth-enabled devices. The ability to pair multiple devices ensures that passengers can easily share their favorite music without tedious reconnections. Furthermore, the receiver includes USB and AUX inputs, giving users additional options for connecting their devices.

The KS-LX200R also accommodates various media formats, including CD, MP3, and WMA playback, ensuring that users can enjoy their entire library of audio content. The convenient front-facing USB port supports charging while listening, making it practical for long drives.

In terms of visual appeal, the KS-LX200R features a vibrant LCD display that provides clear visibility of track information and settings, even in bright sunlight. The user interface is intuitively designed, allowing quick access to various functions and settings, enhancing the overall user experience.

Moreover, the JVC KS-LX200R is built with durability in mind. It is designed to withstand the rigors of daily use in a vehicle environment while maintaining optimal performance. The receiver is compatible with steering wheel control interfaces, enabling users to operate the unit without taking their hands off the wheel for added safety.

Overall, the JVC KS-LX200R stands out as a feature-rich car audio receiver that seamlessly blends quality sound, modern convenience, and robust build quality, making it an excellent choice for any automotive sound system upgrade.
Top Page Image Contents