JVC KS-LX200R manual Other Main Functions, Setting the clock, Changing the general settings PSM

OTHER MAIN FUNCTIONS

Setting the clock

You can also set the clock system either 24 hours or 12 hours.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See page 22.)

2 Set the hour.

1Select “CLOCK H” if not shown on the display.

2Adjust the hour.

1 2

3 Set the minute.

1Select “CLOCK M.”

2Adjust the minute.

1 2

4 Set the clock system.

1Select “24H/12H.”

2Select “24HOUR” or “12HOUR.”

1 2

Changing the general settings (PSM)

You can change the items listed on the next page

by using the PSM (Preferred Setting Mode) control.

Basic Procedure

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See page 22.)

2 Select the PSM item you want to adjust. (See page 22.)

3 Adjust the PSM item selected above.

4 Repeat steps 2 and 3 to adjust the other PSM items if necessary.

5 Press SEL (select) to finish the setting.

ENGLISH

5 Press SEL (select) to finish the setting.

To check the current clock time while the unit is turned off, press + or –.

The power turns on, the clock time is shown for 5 seconds, then the power turns off.

21