JVC KS-LX200R manual Specifications, FM Tuner, MW Tuner, LW Tuner

Page 37

SPECIFICATIONS

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Front:

45 W per channel

Rear:

45 W per channel

Continuous Power Output (RMS):

Front:

17 W per channel into 4 Ω, 40 Hz

 

to 20 000 Hz at no more than

 

0.8% total harmonic distortion.

Rear:

17 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than 0.8% total harmonic distortion.

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range:

Bass: ±10 dB at 100 Hz

Treble: ±10 dB at 10 kHz Frequency Response: 40 Hz to 20 000 Hz Signal-to-Noise Ratio: 70 dB

Line-In Level/Impedance: 1.5 V/20 kΩ load

Line-Out Level/Impedance:

4.0V/20 kΩ load (full scale) Output Impedance: 1 kΩ

CASSETTE DECK SECTION

Wow & Flutter: 0.11% (WRMS)

Fast-Wind Time: 100 sec. (C-60) Frequency Response (Dolby NR-OFF):

30 Hz to 16 000 Hz (Normal tape) Signal-to-Noise Ratio: (Normal tape)

(Dolby NR-ON): 65 dB

(Dolby NR-OFF): 56 dB Stereo Separation: 40 dB

GENERAL

Power Requirement:

Operating Voltage: DC 14.4 V

(11 V to16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature: 0°C to +40°C Dimensions (W × H × D):

Installation Size: 182 mm × 52 mm × 160 mm

Panel Size: 188 mm × 58 mm × 8 mm

Mass: 1.7 kg (excluding accessories)

ENGLISH

TUNER SECTION

Frequency Range:

 

 

FM:

87.5 MHz to 108.0 MHz

AM:

(MW)

522 kHz to

1 620 kHz

 

(LW)

144 kHz to

279 kHz

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)

50 dB Quieting Sensitivity:

16.3 dBf (1.8 µV/75 Ω)

Alternate Channel Selectivity (400 kHz):

65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

[MW Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

[LW Tuner]

Sensitivity: 50 µV

Design and specifications subject to change without notice.

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents FSUN3148-311 E KS-LX200RContents Location of the Buttons How to use the number buttonsFront panel To activate the display demonstrationRemote controller Return the battery holder Installing the batteryRemove the battery holder Place the batteryTo turn off the power To drop the volume in a momentBasic Operations Listening to the radio Radio Basic OperationsSearching a station automatically Auto search Searching a station manually Manual searchStoring stations in memory FM station automatic preset SSMFM1 FM2 FM3 Select the band FM1 Manual presetTune into a station of 88.3 MHz Mode RDS OperationsTA Standby Reception Using Standby ReceptionPTY Standby Reception To deactivate the TA standby mode, pressPTY codes Searching your favorite programmeLast selected PTY code Preset number appear Other convenient RDS functions and adjustmentsAutomatic clock adjustment Setting the TA volume levelChanging the display mode while listening to an FM station To stop play and eject the cassette Listening to a tapeTo fast-forward and rewind a tape Select the tape directionProhibiting tape ejection To cancel the Dolby B NR, repeat the aboveTo play back tapes recorded with the Dolby B NR During playbackPress Mode ATT while playing a Press SEL select to finish the settingPlaying the current tune repeatedly Skipping the blank portions on the tapeAdjusting the sound Sound AdjustmentsAdjust the level Select the item you want to adjustWhat is BBEII? Using the Sound Control MemoryPress Mode ATT Select the sound mode you wantTo reset to the factory settings Storing your own sound adjustmentsRepeat the same procedure to adjust other sound modes For Preset valuesChanging the general settings PSM Setting the clockBasic Procedure Other Main FunctionsPreferred Setting Mode PSM items To select the dimmer mode Dimmer To cancel Advanced SCM SCM LinkTo set the clock display Clock To select the level meter LevelTo turn on/off the key-touch tone Beep To adjust the line input level Line ADJTo change the FM tuner selectivity Filter Flat OFF You can use the control panel normallyRegistering the password Using the security lockHow to Use the Provided Code Sticker Unit enters password entry modeTo change the password When Security Lock works?Playing CDs CD Changer OperationsTo fast-forward or reverse the track Select the CD automatic changer CD-CHTo go to a particular disc directly CanceledTo play back tracks repeatedly Repeat Play RPTTo adjust the subwoofer output volume, see Playing an external component Using a subwooferSelect the external component EXT- Line Operate the external componentWhat is DAB system? Tuning into an ensemble and one of the servicesDAB Tuner Operations Service name Ensemble name Channel number Frequency Storing DAB services in memoryTo tune in a particular ensemble without searching Press Source Band to select DAB tuner as the sourceSelected service into for more than Tuning into a preset DAB servicePress and hold the number button SecondsTo use Alternative Reception While receiving a DAB serviceYou can keep listening to the same program While receiving an FM RDS stationSymptoms Causes Remedies TroubleshootingReset button of the CD changer Programmes where people can Advice on a wide varietyNews Topical programmes expandingTo clean the heads MaintenanceTo keep the tape clean Ignition key-off release/Ignition key-on playFM Tuner SpecificationsMW Tuner LW TunerHaving Trouble with operation? Pile CR2025 Nach ihrer Überprüfung, die Teile richtig einsetzenDie Griffe nach dem Einbau auf jeden Fall aufbewahren Be sure to keep the handles after installing itTo subwoofer see diagram C Zum Subwoofer siehe Schaltplan C Cut the ISO connector Den ISO-Stecker AbschneidenBlau mit weißem Streifen To power aerial if any To car light control switchSound is distorted Fuse blowsUnit becomes hot Die Sicherung brennt durchGET0037-001A English Nederlands
Related manuals
Manual 21 pages 46.39 Kb

KS-LX200R specifications

The JVC KS-LX200R is a versatile car audio receiver that combines advanced technology with user-friendly features, ensuring an elevated listening experience for audiophiles and casual listeners alike. This model is celebrated for its sleek design and powerful performance, making it an ideal addition to any vehicle.

One of the standout features of the KS-LX200R is its high-performance audio technology. It boasts a built-in amplifier capable of delivering up to 50 watts per channel, producing crystal-clear sound with minimal distortion. The unit supports various digital audio formats, allowing for compatibility with a wide range of media sources. Additionally, the receiver is equipped with a 13-band equalizer, enabling users to fine-tune the audio output to match their personal preferences and optimize sound quality according to the car’s acoustics.

Connectivity is at the forefront of the KS-LX200R's design. It features Bluetooth technology for hands-free calling and seamless wireless audio streaming from smartphones and other Bluetooth-enabled devices. The ability to pair multiple devices ensures that passengers can easily share their favorite music without tedious reconnections. Furthermore, the receiver includes USB and AUX inputs, giving users additional options for connecting their devices.

The KS-LX200R also accommodates various media formats, including CD, MP3, and WMA playback, ensuring that users can enjoy their entire library of audio content. The convenient front-facing USB port supports charging while listening, making it practical for long drives.

In terms of visual appeal, the KS-LX200R features a vibrant LCD display that provides clear visibility of track information and settings, even in bright sunlight. The user interface is intuitively designed, allowing quick access to various functions and settings, enhancing the overall user experience.

Moreover, the JVC KS-LX200R is built with durability in mind. It is designed to withstand the rigors of daily use in a vehicle environment while maintaining optimal performance. The receiver is compatible with steering wheel control interfaces, enabling users to operate the unit without taking their hands off the wheel for added safety.

Overall, the JVC KS-LX200R stands out as a feature-rich car audio receiver that seamlessly blends quality sound, modern convenience, and robust build quality, making it an excellent choice for any automotive sound system upgrade.
Top Page Image Contents