JVC KS-LX200R Storing DAB services in memory, To tune in a particular ensemble without searching

Page 31

To change the display information while tuning into an ensemble

Normally service name is shown on the display. If you want to check the ensemble name or its frequency, press DISP.

Each time you press the button, the following information appears for a while on the display.

Service name

Ensemble name

Channel number

Frequency

To tune in a particular ensemble without searching:

1 Press SOURCE (BAND) to select DAB tuner as the source.

2 Press and hold ¢or 4 for more than 1 second.

3 Press ¢ or 4 repeatedly until the ensemble you want is reached.

•If you hold down the button, the frequency keeps changing until you release the button.

Storing DAB services in memory

You can preset up to 6 DAB services in each DAB band (DAB1, DAB2 and DAB3) manually.

1 Select the DAB tuner (DAB1–3).

1 Press SOURCE (BAND) to select DAB tuner as the source.

2If necessary, press and hold SOURCE (BAND) repeatedly to select the DAB band number (DAB1, DAB2 or DAB3.)

Each time you press and hold the button, the DAB band changes as follows:

DAB1 DAB2 DAB3

2 Tune into an ensemble you want.

3 Select a service of the ensemble you want.

1Press MODE ATT.

“MODE” appears on the display.

2 Press ¢ or 4 to select a service you want, while “MODE” is still on the display.

CONTINUED ON THE NEXT PAGE

ENGLISH

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents FSUN3148-311 E KS-LX200RContents To activate the display demonstration How to use the number buttonsLocation of the Buttons Front panelRemote controller Place the battery Installing the batteryReturn the battery holder Remove the battery holderTo turn off the power To drop the volume in a momentBasic Operations Searching a station manually Manual search Radio Basic OperationsListening to the radio Searching a station automatically Auto searchStoring stations in memory FM station automatic preset SSMFM1 FM2 FM3 Select the band FM1 Manual presetTune into a station of 88.3 MHz Mode RDS OperationsTo deactivate the TA standby mode, press Using Standby ReceptionTA Standby Reception PTY Standby ReceptionPTY codes Searching your favorite programmeLast selected PTY code Preset number appear Other convenient RDS functions and adjustmentsAutomatic clock adjustment Setting the TA volume levelChanging the display mode while listening to an FM station Select the tape direction Listening to a tapeTo stop play and eject the cassette To fast-forward and rewind a tapeDuring playback To cancel the Dolby B NR, repeat the aboveProhibiting tape ejection To play back tapes recorded with the Dolby B NRSkipping the blank portions on the tape Press SEL select to finish the settingPress Mode ATT while playing a Playing the current tune repeatedlySelect the item you want to adjust Sound AdjustmentsAdjusting the sound Adjust the levelSelect the sound mode you want Using the Sound Control MemoryWhat is BBEII? Press Mode ATTFor Preset values Storing your own sound adjustmentsTo reset to the factory settings Repeat the same procedure to adjust other sound modesOther Main Functions Setting the clockChanging the general settings PSM Basic ProcedurePreferred Setting Mode PSM items To select the level meter Level To cancel Advanced SCM SCM LinkTo select the dimmer mode Dimmer To set the clock display ClockFlat OFF You can use the control panel normally To adjust the line input level Line ADJTo turn on/off the key-touch tone Beep To change the FM tuner selectivity FilterUnit enters password entry mode Using the security lockRegistering the password How to Use the Provided Code StickerTo change the password When Security Lock works?Select the CD automatic changer CD-CH CD Changer OperationsPlaying CDs To fast-forward or reverse the trackRPT CanceledTo go to a particular disc directly To play back tracks repeatedly Repeat PlayOperate the external component Playing an external component Using a subwooferTo adjust the subwoofer output volume, see Select the external component EXT- LineWhat is DAB system? Tuning into an ensemble and one of the servicesDAB Tuner Operations Press Source Band to select DAB tuner as the source Storing DAB services in memoryService name Ensemble name Channel number Frequency To tune in a particular ensemble without searchingSeconds Tuning into a preset DAB serviceSelected service into for more than Press and hold the number buttonWhile receiving an FM RDS station While receiving a DAB serviceTo use Alternative Reception You can keep listening to the same programSymptoms Causes Remedies TroubleshootingReset button of the CD changer Topical programmes expanding Advice on a wide varietyProgrammes where people can NewsIgnition key-off release/Ignition key-on play MaintenanceTo clean the heads To keep the tape cleanLW Tuner SpecificationsFM Tuner MW TunerHaving Trouble with operation? Pile CR2025 Nach ihrer Überprüfung, die Teile richtig einsetzenDie Griffe nach dem Einbau auf jeden Fall aufbewahren Be sure to keep the handles after installing itTo car light control switch Cut the ISO connector Den ISO-Stecker AbschneidenTo subwoofer see diagram C Zum Subwoofer siehe Schaltplan C Blau mit weißem Streifen To power aerial if anyDie Sicherung brennt durch Fuse blowsSound is distorted Unit becomes hotGET0037-001A English Nederlands
Related manuals
Manual 21 pages 46.39 Kb

KS-LX200R specifications

The JVC KS-LX200R is a versatile car audio receiver that combines advanced technology with user-friendly features, ensuring an elevated listening experience for audiophiles and casual listeners alike. This model is celebrated for its sleek design and powerful performance, making it an ideal addition to any vehicle.

One of the standout features of the KS-LX200R is its high-performance audio technology. It boasts a built-in amplifier capable of delivering up to 50 watts per channel, producing crystal-clear sound with minimal distortion. The unit supports various digital audio formats, allowing for compatibility with a wide range of media sources. Additionally, the receiver is equipped with a 13-band equalizer, enabling users to fine-tune the audio output to match their personal preferences and optimize sound quality according to the car’s acoustics.

Connectivity is at the forefront of the KS-LX200R's design. It features Bluetooth technology for hands-free calling and seamless wireless audio streaming from smartphones and other Bluetooth-enabled devices. The ability to pair multiple devices ensures that passengers can easily share their favorite music without tedious reconnections. Furthermore, the receiver includes USB and AUX inputs, giving users additional options for connecting their devices.

The KS-LX200R also accommodates various media formats, including CD, MP3, and WMA playback, ensuring that users can enjoy their entire library of audio content. The convenient front-facing USB port supports charging while listening, making it practical for long drives.

In terms of visual appeal, the KS-LX200R features a vibrant LCD display that provides clear visibility of track information and settings, even in bright sunlight. The user interface is intuitively designed, allowing quick access to various functions and settings, enhancing the overall user experience.

Moreover, the JVC KS-LX200R is built with durability in mind. It is designed to withstand the rigors of daily use in a vehicle environment while maintaining optimal performance. The receiver is compatible with steering wheel control interfaces, enabling users to operate the unit without taking their hands off the wheel for added safety.

Overall, the JVC KS-LX200R stands out as a feature-rich car audio receiver that seamlessly blends quality sound, modern convenience, and robust build quality, making it an excellent choice for any automotive sound system upgrade.
Top Page Image Contents