Radio Operations
TUNE / A.ME | BAND |
SOURCE
g DN f UPF Preset buttons (1 through 6)
Manual Tuning
1
2 Press the BAND button repeatedly until the desired radio band is displayed.
Each press changes the band:
→ F1(FM1) → F2(FM2) → MW → LW
3 Press the TUNE button repeatedly until "DX SEEK" and "SEEK" disappear from the display.
NOTE
The initial mode is DX SEEK.
4 Press the g DN or f UP button to move downward or upward one step respectively until the desired station frequency is displayed.
Automatic Seek Tuning
1
2 Press the BAND button repeatedly until the desired radio band is displayed.
Each press changes the band:
→ F1(FM1) → F2(FM2) → MW → LW
3 Press the TUNE button to illuminate the DX and SEEK indicators in the display.
The SEEK indicator illuminates. With the DX mode activated, both strong and weak stations will be tuned in the
Press again to return to the local mode. The DX indicator will turn off and the SEEK indicator will illuminate for a few seconds. Now, only strong stations will be tuned.
4 Press the g DN or f UP button to automatically seek a station downward or upward respectively.
The unit will stop at the next station it finds. Press the same button again to seek the next station.