Alpine CDM-7856R, CDM-7859R Automatic Memory of Station Presets, Tuning to Preset Stations

Page 11
Select the radio band and tune in a desired radio station you wish to store in the preset memory.

Manual Storing of Station Presets

1

2 Press the F button so that the F (Function) indicator light goes out. Then press and hold any one of the preset buttons (1 through 6) for at least 2 seconds until the station frequency on the display blinks.

3 Press the Preset button into which you wish to store the station while the frequency display is blinking (within 5 seconds).

The display stops blinking once the station has been memorized. The display shows the band, preset No. with a triangle (9) and station frequency memorized.

4 Repeat the procedure to store up to 5 other stations onto the same band.

To use this procedure for other bands, simply select the band desired and repeat the procedure.

A total of 24 stations can be stored in the preset memory (6 stations for each band; FM1, FM2, MW and LW).

NOTE

If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station.

Automatic Memory of Station Presets

1 Press the BAND button repeatedly until the desired radio band is displayed.

Each press changes the band:

F1(FM1) F2(FM2) MW LW

2 Press and hold the A.ME button for at least 2 seconds.

The tuner will automatically seek and store 6 strong stations in the selected band in order of signal strength.

The frequency on the display continues to change while the automatic memory is in progress.

When the automatic memory has been completed, the tuner goes to the station stored in the preset location No. 1.

NOTE

If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began.

Tuning to Preset Stations

1 Press the BAND button repeatedly until the desired band is displayed.

Each press changes the band:

F1(FM1) F2(FM2) MW LW

2 Press the F button so that the F (Function) indicator light goes out. Then press the station preset button that has your desired radio station in memory.

The display shows the band, preset number with a triangle and frequency of the station selected.

9-EN

Image 11
Contents CDM-7859R CDM-7858R CDM-7856R Alpine CD Changers Give You More Contents Precautions Handling the Detachable Front Panel Attaching the Front Panel Controllable With Remote ControlBasic Operations Detaching the Front PanelTurning Loudness On/Off Turning Power On and OffAdjusting Source Signal Levels Subwoofer On and OffBasic Operation Setting the Bass Control Setting the Treble ControlChanging Audio Level Display Pattern Setting the AUX ModeSwitching the Tuner Mode Radio Operations Manual TuningAutomatic Seek Tuning Tuning to Preset Stations Automatic Memory of Station PresetsRDS Operations Setting RDS Reception Mode and Receiving RDS StationsRecalling Preset RDS Stations Light M ← Classics → Other M PTY Programme Type TuningReceiving Traffic Information Priority News When traffic information stations cannot be receivedReceiving Traffic Information While Playing CD or Radio Normal Play and Pause CD Player OperationInserting/Ejecting Disc RPT RPT ALL OFF Music Sensor Skip Repeat PlayFast Forward and Backward X. Random PlayControlling CD Changer Optional Scanning ProgrammesCase of Difficulty InformationsError SpecificationsPrecautions Installation and ConnectionsRemoval InstallationRear or ConnectionTo prevent external noise from entering the audio system Switched Power Lead Ignition Red