Basic Operation

SOURCE BAND 2 1

gDN

fUP

BASS C. TREBLE C. SETUP

Setting the Bass Control

Setting the Treble Control

You can change the Bass Frequency emphasis to create your own tonal preference.

1 Press the BASS C. button to turn on the Bass setting mode.

2-1Setting the Bass frequency:

Press the g DN or f UP button to select the desired Bass centre frequency.

60Hz ↔ 80Hz ↔ 100Hz ↔ 200Hz

Emphasizes the displayed Bass frequency ranges.

2-2Setting the Bass Band Width (Q-Factor): Press the BAND button to select the desired Bass Band Width.

→WIDE1 → WIDE2→ WIDE3 → WIDE4 (Wide)← ...........................→ (Narrow)

Changes the displayed frequency's band width to narrow or wide.

2-3Setting the Bass Level:

Press the 5 or 6 button to select the desired Bass Level (-7~+7).

You can emphasize or weaken the bass frequency.

NOTES

•If no buttons are pressed within 5 seconds, the Bass control setting will be turned off automatically.

•The settings of the Bass Level will be individually memorized for each source (FM, MW (LW) and CD) until the setting is changed. Depending on the connected devices, some functions and display indications do not work.

You can change the Treble Frequency emphasis to create your own tonal preference.

1 Press the TREBLE C. button to turn on the Treble setting mode.

2-1Setting Treble frequency:

Press g DN or f UP button to select the desired Treble centre frequency.

10kHz ↔ 12.5kHz ↔ 15kHz ↔ 17.5kHz

Emphasizes the displayed Treble frequency ranges.

2-2Setting Treble Level:

Press the 5 or 6 button to select the desired Treble Level (-7~+7).

You can emphasize the treble frequency.

NOTES

•If no buttons are pressed within 5 seconds, the Treble control setting will be turned off automatically.

•The settings of the Treble Level will be individually memorized for each source (FM, MW (LW) and CD) until the setting is changed. Depending on the connected devices, some functions and display indications do not work.

6-EN