Changing Audio Level Display Pattern
1 Press the SETUP button for at least 3 seconds.
2 Press g DN or f UP button to select the DISP mode.
3 Press BAND button to switch the display pattern.
→DISP1 → DISP2 → DISP OFF
DISP1:
Lights the Volume indicator.
Volume indicator
DISP2:
Lights the mode and value bars to show the settings in the Bass engine display.
Example settings:
Bass center frequency: 100 Hz
Bass band width: WIDE1
Bass level: - 6
NOTE
The last mode set will remain in effect. The mode and value bars light and show the Bass engine settings.
DISP OFF:
Turns off the light in Bass engine display.
If you set DISP OFF, the Volume indicator, Audio Level indicator, and Bass engine displays are not lit at all times.
To light them, press the BAND button to exit
DISP OFF.
4 Press the SETUP button to return to normal mode.
Setting the AUX Mode
You can input TV/video sound by connecting an optional
1 Press and hold the SETUP button for at least 3 seconds.
2 Press the g DN or f UP button to select the AUX mode.
3 Press the BAND button to toggle the mode between AUX ON and AUX OFF.
4 Press the SETUP button to return to normal mode.
5 To adjust the volume, etc., first press the SOURCE button and select the AUX mode, then make the necessary adjustment.
→TUNER → CD → AUX
NOTE
When AUX ON is selected, a CD Changer cannot be used.
Switching the Tuner Mode
The
1
2 Press the g DN or f UP button to select
NORMAL.
3 Press the BAND button to switch the TUNER mode.
→HI-FI → NORMAL → STABLE
NORMAL: Standard setting
STABLE: Noiseless priority setting
NOTES
•The initial setting at the factory is "NORMAL."
•If you find the sound is very noisy while listening to the tuner in the
4 When the setting is completed, press the SETUP button to return to the normal mode.