Alpine DVA-5210 owner manual Custom Setup Operation, 20-EN

Setting the Digital Output

Use the following procedure to set the digital audio signal output from the DVA-5210.

Setting item: DIGITAL OUT

Setting contents: AUTO / LPCM

AUTO: The digital output is switched automatically according to the type of audio signal being played.

Be sure to select “AUTO” when you want to connect a digital audio processor and play Dolby Digital audio. “AUTO” is selected upon shipment from the factory.

LPCM: The audio signal recorded on the disc is converted to 48 kHz/16 bit (for DVDs) or 44.1 kHz (for video CDs and CDs) linear PCM audio signals for output.

• Press RETURN to return to the previous screen.

Audio output/Optical digital audio output

Disc	Audio recording		Digital output	Optical digital	Analog
	format		setting	audio output	audio
				(when a digital	output
				audio processor	(Ai-NET,
				is connected)	RCA output)
DVD	DTS		AUTO	DTS Elementary	OK
				Stream
			LPCM	LPCM Encode	OK
				2ch Down mix
				(48kHz/16bit)
	Dolby Digital		AUTO	Dolby Digital	OK
			LPCM	LPCM	OK
				(48kHz/16bit)
	Linear	48kHz/	AUTO or	LPCM	OK
	PCM	16bit	LPCM	(48kHz/16bit)
		48kHz/	AUTO or	LPCM	OK
		20bit	LPCM	(48kHz/16bit)
		48kHz/	AUTO or	LPCM	OK
		24bit	LPCM	(48kHz/16bit)
		96kHz/	AUTO or	LPCM	OK
		16bit	LPCM	(48kHz/16bit)
		96kHz/	AUTO or	LPCM	OK
		20bit	LPCM	(48kHz/16bit)
		96kHz/	AUTO or	LPCM	OK
		24bit	LPCM	(48kHz/16bit)
	MPEG2		AUTO or	LPCM	OK
			LPCM	(48kHz/16bit)
Video	MPEG1		AUTO or	LPCM	OK
CD			LPCM	(44.1kHz)
CD	Linear PCM		AUTO or	LPCM	OK
			LPCM	(44.1kHz)
	DTS		AUTO	DTS Elementary	OK
				Stream
			LPCM	LPCM Encode	OK
				2ch Down mix
				(44.1kHz/16bit)
MP3	MPEG-1	32kHz/	AUTO or	LPCM	OK
	Audio	16bit	LPCM	Encode 2ch
	Layer3			(32kHz/16bit)
	Bit Rate:	44.1kHz/	AUTO or	LPCM	OK
	32kbps-	16bit	LPCM	Encode 2ch
	320kbps			(44.1kHz/16bit)
		48kHz/	AUTO or	LPCM	OK
		16bit	LPCM	Encode 2ch
				(48kHz/16bit)
WMA	Windows	32kHz/	AUTO or	LPCM	OK
	MediaTM	16bit	LPCM	Encode 2ch
	Audio			(32kHz/16bit)
	Bit Rate:	44.1kHz/	AUTO or	LPCM	OK
	32kbps-	16bit	LPCM	Encode 2ch
	192kbps			(44.1kHz/16bit)
		48kHz/	AUTO or	LPCM	OK
		16bit	LPCM	Encode 2ch
				(48kHz/16bit)

Custom Setup

SETUP	;
	8
RETURN	:
	ENT.
	9

Custom Setup Operation

The following steps 1 to 5 are common operations to each setting item of CUSTOM SETUP. Refer to each section for details.

1 Press SETUP before inserting a disc, or when in stop mode.

The setup menu appears on the monitor.

LS E T U P

DVD SETUP

L A	N G U	A	G E	S		:
T V S C R E E N					1 6 : 9
C O U N T R Y C O D E					6 8 6 9
P A R E N T A L					O F F	:
P L A Y M O D E					C D - D A
D I G I T A L				O U T	A U T O
C U S T O M S E T U P						:

2 Press 8 or 9 to select “CUSTOM SETUP,” then press : or ENT.

3 Press 8 or 9 to select your desired setting item.

CUSTOM SETUP items:

Ai-NET SETUP / BEEP / TITLE SCROLL / AUTO SCROLL

LS E T U P

C U S	T	O M
A I - N E T			S E T U P		F U L L
B E E P					O N
T I	T L E		S C R O L	L	T Y P E 1
A U T O S C R O L L					A U T O

;R E T U R N

4 Press ;, : or ENT. to change the setting.

20-EN