Playing DVD/Video CD, Stopping Playback | Alpine DVA-5210 instruction

DVD/Video CD

	DISPLAY	MENU
		;
		8
	RETURN	:
		ENT.
	:/J	9
	g	f
	L	number
	L	keys
		keys
		(0 to 9)
	CLR	V.OUT
		V.OUT
	REPEAT	ANGLE
		ANGLE
	AUDIO	SUBTITLE

Playing DVD/Video CD

Caution

•Not all functions will operate for every DVD. See the individual DVD’s instructions for details on the features supported.

•Fingerprints on a disc may adversely affect playback. If a problem occurs, remove the disc and check for fingerprints on the playback side. Clean the disc if necessary.

•When using the remote control, be careful to press one button at time. Pressing multiple buttons at the same time may cause erroneous operation.

•If you switch the power or ignition key OFF, or change sources during playback, playback will continue where you left off when you resume playback.

•If you try to perform an invalid operation (based on the type of disc being played), the following mark is displayed on the monitor screen:

Insert a disc with the label side facing up.

To load discs, see “Loading and Unloading Discs” on page 9.

Playback starts. The front panel VIDEO indicator lights in amber during playback.

•The reverse side of a double-sided DVD will not be played automatically. Remove the disc, turn it over, and reinsert it.

•It may take some time before playback starts after loading a disc.

If a menu screen appears

On DVDs and video CDs with playback control (PBC), menu screens may appear automatically. If this happens, perform the operation described below to start playback.

•For many discs, the menu screen can also be displayed by pressing MENU.

DVD menu

Press 8, 9, ; or : to select the desired item, then press ENT.

•For some discs it is possible to select items directly from the menu screen using the number keys (“0” to “9”).

Video CD menu

Use the number keys (“0” to “9”) to select the desired number, then press ENT.

•The menu screen does not appear when the PBC function is turned off. If this is the case, press MENU to turn on the PBC function.

Stopping Playback (PRE-STOP)

Press L during playback to stop playback. That position is stored in memory.

1 Press L during playback.

“PRE-STOP” is displayed.

2 Press -/Jin the PRE-STOP mode.

Playback starts from the position at which it was stopped.

•For some discs, the position at which playback was stopped may not be accurate.

Stopping Playback

Press L twice during playback.

“STOP” is displayed, and playback stops.

•Playback stops also when L is pressed for more than 2 seconds.

•Playback starts from the beginning when -/Jis pressed while playback is stopped.

Fast-forwarding/Fast-reversing

1 During playback, press and hold g(fast-reverse) or f(fast-forward) .

When pressed for more than 1 second, the disc is forwarded/reversed at double speed.

When held in 5 more seconds, the disc is forwarded/ reversed at 8 times the normal speed.

2 Release gor fto return to normal playback.

•No sound and no subtitles appear during fast-forward/fast-reverse.

•For DVDs and video CDs with playback control (PBC), the menu screen may reappear during fast-forwarding/fast-reversing.

10-EN