Alpine DVA-5210 owner manual Connections, Setting the System Switch, 32-EN, Connect the power plug

Connections

White/Brown

Black

Fuse (7.5A)

Red

REMOTE IN

GND

BATTERY

Yellow

IGNITION

Cable Color		Cable Specifications
	Yellow	• Video Output Connector
		This connector is used in combination with the video inputs of
		another video product (AV head unit or TV monitor).

• Audio Output Connectors

White (L) This output may be connected to a Rear Monitor with a volume control or an auxiliary audio preamp. This is used to monitor the

Red (R) DVD audio while the main audio system is being driven by another source (such as Radio or CD).

White/	• Remote Control Input Lead
	This lead is used in combination with the Ai-NET compatible AV
Brown
	head unit or the ALPINE monitor with a remote control output lead.
	• Ground Lead
Black	Connect this lead to a good chassis ground on the vehicle. Make
	sure the connection is made to bare metal and is securely fastened
	using the sheet metal screw provided.
Yellow	• Battery Lead
	Connect this lead to the positive (+) post of the vehicle’s battery.
	• Switched Power Lead (Ignition)
	Connect this lead to an open terminal on the vehicle’s fuse box
Red	or another unused power source which provides (+)12V only
	when the ignition is turned on or in the accessory position.
	When connecting with the Ai-NET compatible AV head unit or
	the Ai-NET compatible head unit, do not connect the ignition lead.

•Digital Output Terminal (Optical)

This terminal is used to connect DVA-5210 to ALPINE digital audio processor (PXA-H700 etc.).

These products include a fiber optic cable that will plug directly into the Digital Output Terminal of the DVA-5210.

•Ai-NET Connector (Gray)

Connect this to the output or input connector of other product equipped with Ai-NET.

•Remote Control Eye Jack

Connect this to the remote control sensor unit. Not used when using a monitor with a built-in remote control sensor unit. A remote control sensor unit is needed when a monitor or navigation unit made by other company is connected.

•Ai-NET Connector (Black)

Connect this to the output or input connector of other product equipped with Ai-NET.

To remote control output lead

Connect to a metal part of chassis body with a screw

Ignition Key

Remote Control Eye

(Sold Separately)

•Connect properly.

Never connect to parts other than the ones indicated in these operating instructions.

•Also refer to the operating instructions of the other products in the system.

Setting the System Switch

Switch to operate from either an Ai-NET compatible head unit or Ai-NET compatible AV head unit connected to this unit. Be sure to set the system switch before fastening the DVA-5210 in place.

1

2

Disconnect the power plug.

Set the system switch at the bottom of this unit with a pointed object.

1:

When connecting to an Ai-NET compatible head unit or Ai-NET compatible AV head unit.

If set to 2, with any of the Ai-NET compatible (AV) head units connected, you may not be able to operate from the head unit, or listen to audio from some external devices, etc.

The factory default is 1.

2:

When connecting to an Ai-NET incompatible head unit or another manufacturer's head unit.

3 Connect the power plug.

32-EN