Alpine DVA-5210 owner manual Specifications, 29-EN, Bottom side of player

Page 30

NO DISC

No disc is inserted.

-Insert a disc.

Although a disc is inserted, “NO DISC” is displayed and the unit does not start to play or eject the disc.

-Remove the disc by following these steps:

1)Open the door.

2)Press c again for at least 3 seconds.

Remote control operation is not possible.

-For some discs or playing modes, certain operations are not possible. This is not a malfunction.

REGIONAL CODE

VIOLATION

Disc does not match regional code number.

- Load a disc that matches the regional code number.

HI-TEMP

Protective circuit is activated at high temperature.

-The indicator will disappear when the temperature returns to within operation range.

-Leave the power OFF until the temperature decreases and then turn the power ON again.

LOADING ERROR

Specifications

Frequency Response

DVD: 5 – 22,000 Hz (± 1 dB) (48 kHz sampling) 5 – 44,000 Hz (± 1 dB) (96 kHz sampling)

CD: 5 – 20,000 Hz (± 1 dB)

Wow & Flutter (% WRMS)

Below measurable limits

Total Harmonic Distortion

0.03% (at 1 kHz)

Dynamic Range

90 dB (at 1 kHz)

Channel Separation

85 dB (at 1 kHz)

Signal system

NTSC/PAL

Horizontal resolution

500 lines or greater

Video output level

1Vp-p (75 ohms)

Video S/N ratio

DVD: 60 dB

Audio S/N ratio

DVD: 95 dB

 

 

 

 

 

CD:

90 dB

PICKUP

 

 

 

Wave length

DVD: 665 nm

 

 

 

 

 

CD:

800 nm

Laser power

CLASS II

REMOTE CONTROL

 

 

Battery Type

 

CR2025 battery

Width

51 mm (2")

Height

119 mm (4-11/16")

Depth

13 mm (33/64")

Weight

50 g (1.75 oz) (battery excluded)

GENERAL

 

 

 

Power Requirement

14.4 V DC

 

 

 

 

 

(11–16 V allowable)

Operating Temperature

+14°F to +140°F

 

 

 

 

 

(-10°C to + 60°C)

Audio Output Level

 

 

Auxout:

1.2V/10k ohms

Ai-NET:

850 mV

CHASSIS SIZE

 

 

 

Width

178 mm (7")

Height

50 mm (2")

Depth

165 mm (6-1/2")

Weight

1.5kg (3 lbs. 5 oz)

Due to continuous product improvement, specifications and design are subject to change without notice.

EJECT ERROR

Mechanism error.

1)Press c and eject the disc.

If the disc does not eject, press c again for at least 3 seconds and eject the disc.

If the disc still does not eject, consult your Alpine dealer.

2)When the error indication remains after ejecting, press c again.

If the error indication still does not turn off after pressing c a few times, consult your Alpine dealer.

CAUTION

CLASS 1

LASER PRODUCT

(Bottom side of player)

CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM

(Bottom side of player)

29-EN

Image 30
Contents DVA-5210 Contents Installation and Connections Operating Instructions Precautions Discs playable on this unit On handling compact discs CD/CD-R/CD-RW Opening the battery case When Using the Remote ControlBattery Replacement Replacing the batteryTurning Power On and Off When connecting to the head unit Using Ai-NETWhen connecting to the head unit Without using Ai-NET Loading and Unloading Discs Switching between Ntsc and PALInitial System Start-Up Loading discsStopping Playback PRE-STOP DVD/Video CDPlaying DVD/Video CD Stopping PlaybackSlow Motion Playback Playing Still Frames pausingFrame-by-frame Playback Searching by Title Number DVD onlyVideo CDs with multiplex audio Switching the Subtitles subtitle language DVD onlySwitching the Audio Tracks 12-ENUsing Ai-NET Displaying the Disc Status DVD only13-EN X. Random Play Repeat PlayPlayback 14-ENSelecting Folders Playing MP3/WMA Data15-EN 16-EN Folder/File SearchAbout MP3/WMA Press List during playbackTerminology 17-ENDVD Setup DVD Setup Operation18-EN 19-EN Setting the Country CodeSetting the Rating Level Parental Lock Press 8 or 9 to select the Parental LevelCustom Setup Custom Setup Operation20-EN Setting the Title Scroll Setting the Ai-NETSetting the Scroll Type 21-ENOther Useful Features Operating from the Head Unit22-EN Information About DVDs23-EN Dolby Pro Logic TerminologyDolby Digital Linear PCM audio LpcmList of Language Codes 25-ENFor details, see List of Country Codes 26-EN27-EN Case of Difficulty Indication28-EN Specifications 29-ENBottom side of player Installation and Connections 30-EN31-EN InstallationInstallation Location Slide the mounting sleeve into the dashboardConnections Setting the System SwitchConnect the power plug 32-ENSystem Example Precautions when Making System UpgradesSetting Item 33-ENSetting 34-ENConnecting an Ai-NET compatible Head Unit and TV Monitor 35-ENOperating the DVA-5210 Video Player 36-ENOperating from the optional remote control RUE-4191 37-ENAppendix Q9 no