Alpine DVA-5210 31-EN, Installation Location, Slide the mounting sleeve into the dashboard

Page 32

Installation

Installation Location

Before deciding on the mounting location, check that opening and closing the display will not hamper the gear shift in any position.

•Install at an angle of within 35 degrees from the horizontal.

Caution for installation

Be sure to remove the mounting sleeve squarely from the product.

1

Mounting Sleeve

 

(Included)

Dashboard

3

Lock Pin

Slide the DVA-5210 into the dashboard. When the unit is in place, make sure the locking pins are fully seated in the down position. This can be done by pressing firmly in on the unit while pushing the locking pin down with a small screwdriver. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the Detachable Front Panel.

Removal

1Use a small screwdriver (or similar tool) to push the locking pins to the “up” position (see above drawing). As each pin is unlocked, gently pull out on the unit to make sure it does not re-lock before unlocking the second pin.

2Pull the unit out, keeping it unlocked as you do so.

DVA-5210

Slide the mounting sleeve into the dashboard.

• Remove the wrapping from the unit.

2

Screw

Hex Nut (M5)

∗2

Bolt Stud

Metal

 

Mounting

 

Strap

∗1

DVA-5210

Ground Lead

Chassis

<JAPANESE CAR>

Head unit (Ai-NET)

Ground Lead

*3

Mounting Bracket

Face Plate

Screws (M5 ⋅ 8) (Included)

Screws (M5 ⋅ 8) (Included with the head unit)

DVA-5210

Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (∗1) already attached to the vehicle's chassis.

•For the screw marked ∗2, use an appropriate screw for the chosen mounting location.

Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the DVA-5210. Connect all other leads of the DVA-5210 according to details described in the CONNECTlONS section.

•Secure the ground lead of the unit to a clean metal spot using a screw (*3) already attached to the vehicle's chassis.

31-EN

Page 31 Page 33
Image 32
Page 31 Page 33
Contents DVA-5210 Contents Installation and Connections Operating Instructions Precautions Discs playable on this unit On handling compact discs CD/CD-R/CD-RW When Using the Remote Control Battery ReplacementOpening the battery case Replacing the batteryWhen connecting to the head unit Without using Ai-NET Turning Power On and OffWhen connecting to the head unit Using Ai-NET Switching between Ntsc and PAL Initial System Start-UpLoading and Unloading Discs Loading discsDVD/Video CD Playing DVD/Video CDStopping Playback PRE-STOP Stopping PlaybackPlaying Still Frames pausing Frame-by-frame PlaybackSlow Motion Playback Searching by Title Number DVD onlySwitching the Subtitles subtitle language DVD only Switching the Audio TracksVideo CDs with multiplex audio 12-EN13-EN Using Ai-NETDisplaying the Disc Status DVD only Repeat Play PlaybackX. Random Play 14-EN15-EN Selecting FoldersPlaying MP3/WMA Data Folder/File Search About MP3/WMA16-EN Press List during playbackTerminology 17-EN18-EN DVD SetupDVD Setup Operation Setting the Country Code Setting the Rating Level Parental Lock19-EN Press 8 or 9 to select the Parental Level20-EN Custom SetupCustom Setup Operation Setting the Ai-NET Setting the Scroll TypeSetting the Title Scroll 21-EN22-EN Other Useful FeaturesOperating from the Head Unit 23-EN InformationAbout DVDs Terminology Dolby DigitalDolby Pro Logic Linear PCM audio LpcmFor details, see List of Language Codes25-EN List of Country Codes 26-EN27-EN 28-EN Case of DifficultyIndication Bottom side of player Specifications29-EN Installation and Connections 30-ENInstallation Installation Location31-EN Slide the mounting sleeve into the dashboardSetting the System Switch Connect the power plugConnections 32-ENPrecautions when Making System Upgrades Setting ItemSystem Example 33-ENSetting 34-ENConnecting an Ai-NET compatible Head Unit and TV Monitor 35-ENOperating the DVA-5210 Video Player 36-ENOperating from the optional remote control RUE-4191 37-ENAppendix Q9 no
Top Page Image Contents