Alpine DVA-5210 owner manual 34-EN, Setting

Connecting an Ai-NET compatible Head Unit, Digital Audio Processor (PXA-H700, PXA-H900, etc.)

and TV Monitor

Monitor

TME-M790 etc

(Sold Separately)

		AV-Interface Unit
		TME-M790 etc
		(Sold Separately)
AUX Audio Input	Terminal (AUX1)	AUX Video Input
		Terminal (AUX1)
		Cable

CD Changer

(Sold Separately)

Remote Control
Output Lead (AUX1)
(White/Brown)	Fiber Optic Cable	Digital Input
		Terminal (Optical)
		(for DVD Player)

Ai-NET Cable

Ai-NET Input

Connector

Digital Audio Processor

PXA-H700 etc

(Sold Separately)

Ai-NET Input

Connector

RCA Extension	Remote Control
	Input Lead
	(White/Brown)
	Video Output
	Connector

RCA Extension

CableAudio Output

Connector

Digital Output Terminal (Optical)

DVD Player

DVA-5210

Ai-NET Cable

Ai-NET Connector (Black)

Ai-NET Connector (Gray)

Ai-NET Cable

System Switch

When connecting a digital audio processor using Ai-NET feature, place this switch in the EQ/DIV position.

EQ/DIV

Ai-NET

Connector

Head Unit

with Ai-NET

(Sold Separately)

Only when connecting with rear monitor

System Switch

1

2

Setting of DVA-5210

The DVA-5210's system settings must be made after connections are completed. Before fixing the unit in place, refer to “Setting the System Switch” on page 32 and “Setting the Ai-NET” on page 21.

	Setting
	AV Head unit available after December	AV Head unit available before January
Setting Item	2003 (IVA-D300R, etc.)	2004 (IVA-D900R, etc.) or Head unit.
System switch	1 (Ai-	NET)
Ai-NET setting	FULL	TIME

•Be sure to switch the head unit’s system switch before turning the power on.

•Also refer to the operating instructions of the other products in the system.

•To connect a rear monitor, connect to the front monitor’s RCA output (TV Tuner Box).

Please observe the following when using Fiber Optic Cable.

•Do not coil the Fiber Optic Cable smaller than a 30 mm radius.

•Do not place anything on top of the Fiber Optic Cable.

The switched (ignition) power lead connection is not needed.

34-EN