SETUP Operation
| Setting the External Input Defeat |
SOURCE/POWER BAND/TEL. | Mode |
|
|
g f F/SETUP
Turning Mute Mode On/Off
If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device. This function can be turned ON or OFF from the head unit by following procedure below.
1 Press and hold the F/SETUP button for at least 3 seconds.
2
3 Press the BAND/TEL. button to turn on or off the MUTE mode.
Each press toggles between the MUTE ON and OFF modes.
NOTE
The initial setting at the factory is “MUTE ON.”
4 Press the F/SETUP button again to return to normal operation.
When inputting external devices to this unit, turning DEFEAT ON will bypass BASS,TREBLE and MX, i.e., sound for external devices is output at the default setting.
1 Press and hold the F/SETUP button for at least 3 seconds.
2
3 Press the BAND/TEL. button to toggle the mode between INT ON and INT OFF.
When using Initial mode, set this to ON.
When the Initial mode is not selected, set this to OFF.
4 Press the F/SETUP button to return to normal mode.
Setting the AUX Mode (V-Link)
You can input TV/video sound by connecting an optional
1 Press and hold the F/SETUP button for at least 3 seconds.
2 Press the f or g button to select “AUX.”
3 Press the BAND/TEL. button to toggle the mode between AUX ON and AUX OFF.
NOTES
•The initial setting at the factory is AUX OFF.
•You can set the AUX mode display by pressing the g or f button after AUX ON is set, select the AUX mode display setting, and then press the BAND button.
•When connecting the
4
5 To adjust the volume, etc., first press the SOURCE/ POWER button and select the AUX mode, then make the necessary adjustment.
NOTE
When using the Versatile Link Terminal