Alpine cda-9805 Music Sensor Skip, Fast Forward and Backward, Repeat Play, M.I.X. Random Play

Page 19
Music Sensor (Skip)

On handling Compact Discs (CD/CD-R/ CD-RW)

Do not touch the surface.

Do not expose the disc to direct sunlight.

Do not affix stickers or labels and do not write on the surface.

Clean the disc when it is dusty.

Make sure that there are no bumps around the disc.

Do not use commercially available disc accessories.

Do not leave the disc in the car or the unit for a long

time. Never expose the disc to direct sunlight. Heat and humidity may damage the CD and you may not be able to play it again.

To customers using CD-R/CD-RW

If a CD-R/CD-RW cannot be played back, make sure close session (finalization) has been performed.

Finalize the CD-R/CD-RW if necessary, and attempt playback again.

Music Sensor (Skip)

1 Momentarily press the g button once during CD play to return to the beginning of the current track. If you wish to access the beginning of a track further back, repeatedly press until you reach the desired track.

Press the f button once to advance to the beginning of the next track. If you wish to access the beginning of a track further ahead, press repeatedly until the desired track is reached.

NOTE

The music sensor feature is functional in the play or pause mode.

Fast Forward and Backward

1 Press and hold the g or f button to quickly move backward or forward until you reach the desired section

of the track.

Repeat Play

1 Press the 4 (Fast Forward and Backward) button to play back repeatedly the track being played.

The track will be played repeatedly.

Press the 4 (Repeat Play) button again and select OFF to deactivate the repeat play.

NOTES

If a CD Changer is connected and the Repeat ALL mode is selected, the unit repeatedly plays back all tracks on the disc selected.

If REPEAT is set to ON during M.I.X. play, M.I.X. will apply to the current disc only.

 

RPT

 

RPT

(off)

 

 

 

 

 

 

(Repeat All)

 

 

 

 

 

 

 

 

In case a 6-disc CD changer is connected:

In CD changer mode, press the “F/SETUP” button to illuminate the underlined portion of the FUNC indicator, and go to step 1 within 5 seconds.

In case a 12-disc CD changer is connected:

In CD changer mode, press the “F/SETUP” button to illuminate the underlined portion of the FUNC indicator, and go to step 1 within 5 seconds.

M.I.X. (Random Play)

1 Press the 5 (M.I.X. (Random Play)) button in the play or pause mode. The tracks on the disc will be played back in a random sequence.

To cancel M.I.X. play, press the 5 (17-EN) button again to turn off the M.I.X.

NOTES

If a CD Changer equipped with the All M.I.X. function is connected, All M.I.X. will also be selectable.

In this mode, the tracks on all the CDs in the current magazine will be included in the random playback sequence. If M.I.X. is set to ON during REPEAT ALL play, M.I.X. will apply to the current disc only.

M.I.X. Manual background M.I.X. (off) (ALL M.I.X.)

In case a 6-disc CD changer is connected:

In CD changer mode, press the “F/SETUP” button to illuminate the underlined portion of the FUNC indicator, and go to step 1 within 5 seconds.

In case a 12-disc CD changer is connected:

In CD changer mode, press the “F/SETUP” button to illuminate the underlined portion of the FUNC indicator, and go to step 1 within 5 seconds.

A disc that contains more than 40 tracks may not be correctly played back with the M.I.X. function.

17-EN

Image 19
Contents FM/AM CD Receiver Please read before using this equipmentCDA-9807 CDA-9805CHA-S634 Alpine CD Changers Give You MoreChangeurs de CD Alpine vous avez le choix ¡Los cambiadores Alpine de CD le ofrecen másCD Player Operation SETUP OperationOperating Instructions Radio OperationXM Radio Operation Optional Installation and ConnectionsRemote Control Operation LIMITED WARRANTY3-EN PRECAUTIONSDisc Cleaning 4-ENPRECAUTIONS Installation LocationDetaching the Front Panel Turning Power On and OffBasic Operation Initial System Start-Upand Rear/Defeat Adjusting Volume/Balance BetweenSetting Time Left and Right/Fader Between Front7-EN Setting the Bass ControlSetting the Treble Control Setting the Bass TypeBasic Operation Setting the MX ModeBlackout Mode On and Off 8-EN9-EN Displaying the Title/TextBasic Operation Titling Discs/StationsErasing Disc Title/Station Title 10-EN11-EN SETUP OperationScroll Setting Subwoofer On and OffTurning Mute Mode On/Off Setting the External Input DefeatSetting the AUX Mode V-Link Mode13-EN Connecting to an External AmplifierRadio Operation Manual TuningAutomatic Seek Tuning Manual Storing of Station PresetsQuick Search Function Automatic Memory of Station PresetsTuning to Preset Stations Station Title Search Function16-EN CD Player OperationInserting/Ejecting Disc Normal Play and PauseM.I.X. Random Play Music Sensor SkipFast Forward and Backward Repeat Play18-EN Scanning ProgramsTrack Search Function Controlling CD Changer Optional19-EN Multi-ChangerSelection20-EN Playing MP3/WMA FilesPlaying MP3 Files with the CD Changer Optional CDA-9807only21-EN Scanning filesFolder/File Search Function Playing MP3 DataReceiving Stored XM Channels Storing XM Channel PresetsXM Radio Operation Optional Checking the XM Radio ID NumberChanging the Display Setting the tuning methodSetting the Auxiliary Data Field Display Channel/Category Search FunctionIncoming Calls MobileHub Link OperationOptionalAbout MobileHub Link Telephone Mode ON/OFFCalling by using the Speed Dial SMS Short Message Service OperationCalling 25-ENControls on Remote Control CDA-9807only Remote Control Operation26-EN 27-EN Battery Replacement CDA-9807onlyAbout MP3/WMA Information28-EN 29-EN TerminologyBasic In Case of Difficulty30-EN InformationHI TEMP ERRORERROR ERRORUPDATING 32-ENInformation ANTENNA33-EN SpecificationsPrecautions Installation and Connections34-EN 35-EN Installation36-EN ConnectionsInstallation and Connections 37-EN Page LIMITED WARRANTY