Calling
Calling by the address book
You can call up the address book registered in the portable telephone to call from.
1 Press and hold the BAND/TEL. button for at least 2 seconds.
2 Press the SEARCH 
button to select the PHONE BK (Phone Book) mode.
A list in alphabetic order is displayed.
(Retrieving an addressee by Alphabetic Sort List to place a call)
1 When displaying the Alphabetic Sort List, select the addressee by turning the Rotary encoder or pressing the g or f button, then place a call by pressing the :/J button or Rotary encoder.
2 Press the BAND/TEL. button to end the call.
The telephone mode will end and return to the original source mode.
(Retrieving an addressee by Selecting Search
1 Select an initial letter (A to Z) of the addressee by pressing the 8 or 9 button.
2 Select the addressee by turning the Rotary encoder and place a call by pressing the Rotary encoder.
3 Press the BAND/TEL. button to end the call.
The telephone mode will end and return to the original source mode.
Calling by using the Speed Dial
You can place a call by retrieving one of the telephone numbers registered in No. 1 to 9 of the address book.
1 Press and hold the BAND/TEL. button for at least 2 seconds.
2 Place a call by pressing within 5 seconds the preset buttons (1 through 6) you want to use for at least 2 seconds.
By pressing the F/SETUP button, and then pressing the preset button (1 through 3) for at least 2 seconds, you can place a call to the number registered in 7 to 9.
NOTES
•You can place a call by pressing the :/J button after momentarily pressing the preset button (1 through 6) of the number you wish to call.
•You can place a call by pressing the Rotary encoder, after selecting a number which you wish to call, by pressing the g or f button or by turning the Rotary encoder.
3 Press the BAND/TEL. button to end the call.
The telephone mode will end and return to the original source mode.
Calling by the outgoing/incoming/absent incoming history
You can place a call to any of the last 999 calls by the outgoing/incoming/absent incoming history.
1 Set the history mode by pressing the SEARCH 
button in PHONE BK (Phone Book) mode.
2 Select “DIALED” (outgoing history), “RECEIVED” (incoming history) or “MISSED” (absent incoming history) by pressing the 8 or 9 button.
3 When the addressee has been selected by turning the Rotary encoder, or pressing the g or f button from the outgoing or incoming history, place a call by pressing the :/J button or the Rotary encoder.
4 Press the BAND/TEL. button to end the call. The telephone mode will end and return to the original source mode.
NOTE
“NO MEM” is displayed if there is no incoming history.
SMS (Short Message Service) Operation
You can be informed when you receive a short message.
Receiving a short message
1 When a text message is received, “NEW MSG” is indicated on the display.
The contents of the received message can only be read from the portable phone's display.
2 Press the BAND/TEL. button to return to the original source mode.