Specifications, Pitch Bend, Digital Display

PITCH BEND:

1.Pushing the PITCH BEND (23) buttons will temporarily raise or lower the pitch without changing the slide setting. Releasing the buttons will return the pitch to the slide setting.

USING THE REVERSE BUTTON:

1.Press the REVERSE (30) button to reverse the rotation of the PLATTER

(2) (the REVERSE LED (30A) will light while in reverse mode). Press the REVERSE button a second time to return to normal play.

DIGITAL DISPLAY:

1.The DIGITAL DISPLAY (20) indicates SPEED (20A), PITCH SLIDE ACTIVATION (20B), PLAY (20C), PAUSE (20D), REVERSE (20E) and PITCH PERCENTAGE (20F).

ARM-LIFT HEIGHT ADJUSTMENT:

If the pre-adjusted distance that the CUE LEVER (19) raises the stylus off the record surface is inadequate, it can be adjusted by turning the ARM- LIFT HEIGHT ADJUSTMENT SCREW (29) while simultaneously pushing down on the TONE ARM (6). Clockwise rotation of the screw will decrease the distance and counterclockwise rotation will increase the distance.

Specifications

TURNTABLE SECTION:

Type	Quartz Direct Drive Manual Turntable
Drive Method	Direct Drive
Motor	Brushless DC Motor 18V
Platter	Aluminum Diecast 13” (332mm) Dia.
Speed	33 1/3, 45 or 78 RPM
Starting Torque	2.2 kg/cm
Build-up Characteristics	0.6 sec. standstill to 33 1/3 RPM
Braking System	Electronic Brake
Wow and Flutter	0.01% WRMS*

*This rating refers to the turntable assembly and platter only and excludes effects of records, cartridges or tonearms.

Rumble		78 dB (IEC 98A WTD)
TONEARM SECTION:
Type		Universal Straight Tubular Arm
Effective Length		9 1/16” (231.5 mm)
Arm Height Adjust Range		0 - 6 mm
Overhang		19/32" (15.1 mm)
Effective Mass		9 g (Without Cartridge)
Offset Angle		22°
Friction		Less Than 7 mg (Lateral, Vertical)
Tracking Error Angle	Within 2°32' at the outer groove and within
	0°32' at the inner groove of a 30 cm (12") record
Stylus Pressure Adjust Range		0 - 5 g
Applicable Cartridge Weight Range		6 - 10 g
Headshell Weight		9 g
GENERAL:
Power Supply		115V~60Hz/230V~50Hz
Power Consumption		15 Watts
Dimensions		17 3/4” x 6" x 14"
		450mm x 152mm x 352 mm
Weight		27 lbs. (12.3 kg)

Specifications are subject to change without notice. The weight and dimensions shown are approximate.

Page 6