Sharp CD-DD4500 operation manual Connecting the AC power cord, Speakers

Page 13

To install the surround speakers on the wall

Sharp designed the surround speakers so you may hang them on the wall. Be sure to use the correct type and size of screw, as shown below.

1/8" (3.2 mm)

3/16" (5 mm)

3/8" (9 mm)

Min. 7/8" (22 mm)

1.Drive one screw into the wall for each speaker, as shown in the illus- tration.

Make sure that both the screw and the wall can support a load of 45 lbs. (20 kg).

Drive the screws, so the screw head extends about 3/16" (5 mm) out from the wall.

 

3/16" (5 mm)

 

Wall mounting screw

Wall surface

Min. 11/16" (17 mm)

 

2.Install the surround speakers on the wall by inserting the screw heads into the slots on the back of the speakers.

Wall surface

CD-DD4500

Bi-amp system:

Each speaker unit has a built-in subwoofer (low frequency range) which is driven sepa- rately from the woofer and tweeter (mid-to-high frequency range). Two independent amplifiers which have individual frequency characteristics are used.

By amplifying separately the two frequency bands, clearer sound is achieved.

 

Mid-to-high range

 

 

 

(200 Hz - 20 kHz)

 

 

Woofer

Power amplifier

 

 

 

 

 

 

Pre-amplifier

Use

 

Tweeter

L-ch

 

 

Pre-amplifier

 

 

 

 

Subwoofer

Power amplifier

 

 

 

Ultra-low range

Preparationfor

Speakers– –

 

(60 Hz - 200 Hz)

Connecting the AC power cord

 

 

After checking all the connections have been made correctly, plug the AC

 

 

power cord of this unit into the AC outlet. If you plug in the unit first, the unit

 

 

will enter the demonstration mode (see page 15).

 

 

Note:

 

 

 

Unplug the unit if it will not be used for a prolonged period of time.

 

 

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents CD-DD4500 Special Notes Explanation of Graphical SymbolsImportant Safeguards Accessories ContentsVolume control PrecautionsPrecautions GeneralGeneral Information Controls and Indicators Controls and IndicatorsFront panel 19 20 21 13 14 15Display Rear panelRemote control Controls and IndicatorsSpeaker system Full-Range Speaker Speaker WireFront speaker left Center speakerPreparation for Use System Connections System ConnectionsAC 120 V, 60 Hz FM/AM loop antenna connection Speaker connectionPreparationforUse Placing the speakers SpeakersFor Use Speakers PreparationSpeakers Connecting the AC power cordBattery installation Remote ControlTest of the remote control Preparation for Use Remote ControlTo turn the power on Demonstration modeGeneral Control Display brightness 2 levelsBass control Sound ControlEqualizer Basic Operation Sound ControlBasic Operation Setting the Clock Setting the ClockTo readjust the clock To confirm the time displayCD Playback Listening to a CD CDs Listening to a CD CDsPress the 7 OPEN/CLOSE button to close the disc tray To locate the desired portion To locate the beginning of a trackListening to a CD CDs Repeat or Random PlayStarting playback with a desired track Repeat PlayCD Playback Programmed Play Programmed PlayListening to the Radio Auto tuningRadio Listening to the Radio To receive an FM stereo transmissionListening to the Memorized Station To scan the preset stationsMemorizing a station To recall a memorized stationTape Playback Listening to a Cassette Tape Tape 1 or Tape Listening to a Cassette Tape Tape 1 or TapeBefore playback Fast forward/rewind Tape 2 onlyTape Recording Recording from the Radio Recording from the RadioTape Recording Recording from a CD CDs Recording from a CD CDsPress the 0/R 0 button to start recording To perform programmed recordingErasing recorded tapes Dubbing from Tape to TapeTape Recording Dubbing from Tape to Tape Press the 0 / R 0 button to start dubbing To stop dubbingType of Dolby digital signal To listen to a disc using the Dolby Digital modeDolby Digital Dolby DigitalEnjoy the Surround Sound Normal/Phantom/Bypass modeSurround Operation Enjoy the Surround Sound Virtual Dolby Surround Enjoy the Surround SoundVirtual Dolby Surround Speaker size setting Changing the Speaker SettingSpeaker Setting ChangingSpeaker delay setting Changing the Speaker SettingWithin 8 seconds, use the SET UP W or X button on the re Mote control to select a valueFront speaker balance setting Speaker level settingSpeakerSetting Speaker level will decreaseTest tone Dynamic range settingTerminology Description of TerminologyDescription Advanced Features Timer and Sleep Operation Timer and Sleep OperationTo reset or change the timer setting To cancel the sleep operationSleep operation To confirm the remaining sleep timeCords required to connect an external unit Enhancing Your SystemEnhancing Your System Headphones Using subwoofer speakers of other equipmentTo record on a tape from DVD or VCR etc To select the unit connected to the VIDEO/AUX in jackSymptom Possible cause Troubleshooting ChartCD player TunerTroubleshooting Chart Connecting DVD playerSymptom CondensationBefore transporting the unit Troubleshooting ChartSpeaker terminals Press the 7 OPEN/CLOSE button to close the disc trayCleaning the tape-handling parts MaintenanceCleaning the cabinet Specifications SpecificationsAmplifier Front speaker with subwoofer SpecificationsCenter speaker Surround speakerMemo Memo Sharp Corporation

CD-DD4500 specifications

The Sharp CD-DD4500 is a versatile and powerful component CD player that blends retro design with modern technology, making it a standout choice for audiophiles and casual listeners alike. Known for its impressive build quality and impressive sound reproduction capabilities, the CD-DD4500 is a staple in home audio setups.

One of the key features of the Sharp CD-DD4500 is its robust CD playback capability, which supports various formats, including CD-DA, CD-R, and CD-RW. This means users can enjoy a wide range of audio content from traditional CDs to personalized playlists burned onto discs. The player is equipped with a high-performance digital-to-analog converter that ensures crisp and clear sound reproduction, minimizing distortion and enhancing the listening experience.

Another groundbreaking technology integrated into the CD-DD4500 is the inclusion of a built-in Bluetooth function. This feature allows users to stream audio wirelessly from their smartphones, tablets, or computers, providing seamless access to digital music libraries and online streaming services. Coupled with the player’s USB port, users can also connect flash drives to play their favorite tracks directly, making it an exceptionally flexible audio solution.

The CD-DD4500’s design is both functional and aesthetically pleasing. It features a user-friendly interface with a clear LCD display that makes it easy to navigate through tracks and functions. The intuitive controls allow for effortless operation, whether adjusting volume, selecting tracks, or entering programming modes.

Additionally, the unit boasts an integrated radio tuner with presets for various stations, expanding the listening options beyond CDs and Bluetooth streaming. Users can enjoy a wide array of music, news, and talk shows without needing additional equipment.

Sound quality is further enhanced by the inclusion of various output options. The Sharp CD-DD4500 features both optical and analog outputs, making it compatible with a variety of audio equipment, from amplifiers to home theater systems. The overall build quality of the device speaks to its durability, ensuring that it remains a reliable part of any audio setup for years to come.

In summary, the Sharp CD-DD4500 excels in combining classic CD playback capabilities with modern streaming features and high-quality sound performance, making it a top choice for those looking to enhance their audio experience in a stylish and modern package. Whether you’re a music enthusiast or just looking for a reliable way to enjoy your favorite tunes, the CD-DD4500 demonstrates performance and flexibility in one compact unit.
Top Page Image Contents