Sharp CD-DD4500 Tape Recording Recording from a CD CDs, To perform programmed recording

Page 26

Recording from a CD (CDs)

Tape Recording – Recording from a CD (CDs) –

You can record 3 CDs continuously.

1 Press the POWER button to turn the power on.

2 Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you.

Wind past the leader of the tape, on which recording cannot be performed.

3 Press the CD button and load the desired disc.

4 Press one of the s 1 - s 3 buttons to select the disc to be re- corded first.

5 Press the REC PAUSE I6 (I6) button.

Recording will be paused.

6 Press the 0/R ( 0 ) button to start recording.

CD playback will start approximately 5 seconds after the tape starts. Recording is started from the selected CD. When the playback of the last disc is finished or the end of the tape is reached, the CD and the cassette will stop automatically.

To perform programmed recording:

1.Program discs and tracks (page 21).

2.Press the REC PAUSE I6 (I6) button.

3.Press the 0/R ( 0 ) button.

To stop recording:

Press the (CD or TAPE ) button.

The CD and tape will stop.

Note:

When the end of the tape is reached while recording, the CD player will display the track number which was being played at that time, and stop automatically.

If you want to restart recording from the interrupted track, turn over the tape, press the REC PAUSE I6 (I6) button and then the 0/R ( 0) button.

(If tracks have been stored in memory using the programmed recording, recording will restart from the first track stored in memory.)

26 Programmed Play (See page 21.)

Image 26
Contents CD-DD4500 Explanation of Graphical Symbols Special NotesImportant Safeguards Contents AccessoriesPrecautions PrecautionsVolume control GeneralFront panel Controls and IndicatorsGeneral Information Controls and Indicators Display 13 14 1519 20 21 Rear panelControls and Indicators Remote controlFront speaker left Full-Range Speaker Speaker WireSpeaker system Center speakerAC 120 V, 60 Hz System ConnectionsPreparation for Use System Connections PreparationforUse Speaker connectionFM/AM loop antenna connection For Use Speakers SpeakersPlacing the speakers PreparationConnecting the AC power cord SpeakersTest of the remote control Remote ControlBattery installation Preparation for Use Remote ControlGeneral Control Demonstration modeTo turn the power on Display brightness 2 levelsEqualizer Sound ControlBass control Basic Operation Sound ControlTo readjust the clock Setting the ClockBasic Operation Setting the Clock To confirm the time displayPress the 7 OPEN/CLOSE button to close the disc tray Listening to a CD CDsCD Playback Listening to a CD CDs To locate the beginning of a track To locate the desired portionStarting playback with a desired track Repeat or Random PlayListening to a CD CDs Repeat PlayProgrammed Play CD Playback Programmed PlayRadio Listening to the Radio Auto tuningListening to the Radio To receive an FM stereo transmissionMemorizing a station To scan the preset stationsListening to the Memorized Station To recall a memorized stationBefore playback Listening to a Cassette Tape Tape 1 or TapeTape Playback Listening to a Cassette Tape Tape 1 or Tape Fast forward/rewind Tape 2 onlyRecording from the Radio Tape Recording Recording from the RadioPress the 0/R 0 button to start recording Recording from a CD CDsTape Recording Recording from a CD CDs To perform programmed recordingTape Recording Dubbing from Tape to Tape Dubbing from Tape to TapeErasing recorded tapes Press the 0 / R 0 button to start dubbing To stop dubbingDolby Digital To listen to a disc using the Dolby Digital modeType of Dolby digital signal Dolby DigitalSurround Operation Enjoy the Surround Sound Normal/Phantom/Bypass modeEnjoy the Surround Sound Virtual Dolby Surround Enjoy the Surround SoundVirtual Dolby Surround Speaker Setting Changing the Speaker SettingSpeaker size setting ChangingWithin 8 seconds, use the SET UP W or X button on the re Changing the Speaker SettingSpeaker delay setting Mote control to select a valueSpeakerSetting Speaker level settingFront speaker balance setting Speaker level will decreaseDynamic range setting Test toneDescription Description of TerminologyTerminology Timer and Sleep Operation Advanced Features Timer and Sleep OperationSleep operation To cancel the sleep operationTo reset or change the timer setting To confirm the remaining sleep timeEnhancing Your System Enhancing Your SystemCords required to connect an external unit To record on a tape from DVD or VCR etc Using subwoofer speakers of other equipmentHeadphones To select the unit connected to the VIDEO/AUX in jackCD player Troubleshooting ChartSymptom Possible cause TunerSymptom Connecting DVD playerTroubleshooting Chart CondensationSpeaker terminals Troubleshooting ChartBefore transporting the unit Press the 7 OPEN/CLOSE button to close the disc trayCleaning the cabinet MaintenanceCleaning the tape-handling parts Amplifier SpecificationsSpecifications Center speaker SpecificationsFront speaker with subwoofer Surround speakerMemo Memo Sharp Corporation

CD-DD4500 specifications

The Sharp CD-DD4500 is a versatile and powerful component CD player that blends retro design with modern technology, making it a standout choice for audiophiles and casual listeners alike. Known for its impressive build quality and impressive sound reproduction capabilities, the CD-DD4500 is a staple in home audio setups.

One of the key features of the Sharp CD-DD4500 is its robust CD playback capability, which supports various formats, including CD-DA, CD-R, and CD-RW. This means users can enjoy a wide range of audio content from traditional CDs to personalized playlists burned onto discs. The player is equipped with a high-performance digital-to-analog converter that ensures crisp and clear sound reproduction, minimizing distortion and enhancing the listening experience.

Another groundbreaking technology integrated into the CD-DD4500 is the inclusion of a built-in Bluetooth function. This feature allows users to stream audio wirelessly from their smartphones, tablets, or computers, providing seamless access to digital music libraries and online streaming services. Coupled with the player’s USB port, users can also connect flash drives to play their favorite tracks directly, making it an exceptionally flexible audio solution.

The CD-DD4500’s design is both functional and aesthetically pleasing. It features a user-friendly interface with a clear LCD display that makes it easy to navigate through tracks and functions. The intuitive controls allow for effortless operation, whether adjusting volume, selecting tracks, or entering programming modes.

Additionally, the unit boasts an integrated radio tuner with presets for various stations, expanding the listening options beyond CDs and Bluetooth streaming. Users can enjoy a wide array of music, news, and talk shows without needing additional equipment.

Sound quality is further enhanced by the inclusion of various output options. The Sharp CD-DD4500 features both optical and analog outputs, making it compatible with a variety of audio equipment, from amplifiers to home theater systems. The overall build quality of the device speaks to its durability, ensuring that it remains a reliable part of any audio setup for years to come.

In summary, the Sharp CD-DD4500 excels in combining classic CD playback capabilities with modern streaming features and high-quality sound performance, making it a top choice for those looking to enhance their audio experience in a stylish and modern package. Whether you’re a music enthusiast or just looking for a reliable way to enjoy your favorite tunes, the CD-DD4500 demonstrates performance and flexibility in one compact unit.