Sharp CD-DD4500 operation manual Changing the Speaker Setting, Speaker size setting

Page 31

Changing the Speaker Setting

CD-DD4500

You can change the setting as you like.

The initial set up was made when shipped from the factory.

The unit can be used as it is, straight out of the box.

Speaker size setting

1 Press the MENU button repeatedly to select “SP SIZE”.

2 Within 8 seconds, press the ITEM button to select “FRONT”.

The front speaker indicators will light up.

3 Within 8 seconds, use the SET UP (W or X) button on the re- mote control to select “LARGE” or “SMALL”.

LARGE:When the front speakers can reproduce low frequencies (speakers which can reproduce sounds lower than 60 Hz)

SMALL: When the front speakers cannot reproduce extremely low frequencies

4 Repeat the operation in steps 2 and 3 above to select “SUR- ROUND”, “CENTER” and “S-WOOFER”.

Each of these items can be set separately.

Surround speakers:

 

disappear

 

 

 

 

 

 

Center speaker:

 

disappear

 

 

 

 

 

 

 

 

 

 

Subwoofer:disappear

disappear

YES: When the speakers are connected

NO: When no speaker is connected (When NO is selected, the indica- tor for that speaker position will go out.)

INT: Setting of the internal subwoofer

EXT: Setting of the external subwoofer (see page 39.)

Note:

When all 5 speakers have been connected, set each of the items to “YES” and the subwoofer to “SW-INT”.

The sound is output from the subwoofer when in the Bypass/Virtual mode, even if the setting of subwoofer is changed.

Operation

Speaker Setting –

Surround

– Changing the

 

 

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents CD-DD4500 Special Notes Explanation of Graphical SymbolsImportant Safeguards Accessories ContentsGeneral PrecautionsVolume control PrecautionsGeneral Information Controls and Indicators Controls and IndicatorsFront panel Rear panel 13 14 1519 20 21 DisplayRemote control Controls and IndicatorsCenter speaker Full-Range Speaker Speaker WireSpeaker system Front speaker leftPreparation for Use System Connections System ConnectionsAC 120 V, 60 Hz FM/AM loop antenna connection Speaker connectionPreparationforUse Preparation SpeakersPlacing the speakers For Use SpeakersSpeakers Connecting the AC power cordPreparation for Use Remote Control Remote ControlBattery installation Test of the remote controlDisplay brightness 2 levels Demonstration modeTo turn the power on General ControlBasic Operation Sound Control Sound ControlBass control EqualizerTo confirm the time display Setting the ClockBasic Operation Setting the Clock To readjust the clockCD Playback Listening to a CD CDs Listening to a CD CDsPress the 7 OPEN/CLOSE button to close the disc tray To locate the desired portion To locate the beginning of a trackRepeat Play Repeat or Random PlayListening to a CD CDs Starting playback with a desired trackCD Playback Programmed Play Programmed PlayTo receive an FM stereo transmission Auto tuningListening to the Radio Radio Listening to the RadioTo recall a memorized station To scan the preset stationsListening to the Memorized Station Memorizing a stationFast forward/rewind Tape 2 only Listening to a Cassette Tape Tape 1 or TapeTape Playback Listening to a Cassette Tape Tape 1 or Tape Before playbackTape Recording Recording from the Radio Recording from the RadioTo perform programmed recording Recording from a CD CDsTape Recording Recording from a CD CDs Press the 0/R 0 button to start recordingPress the 0 / R 0 button to start dubbing To stop dubbing Dubbing from Tape to TapeErasing recorded tapes Tape Recording Dubbing from Tape to TapeDolby Digital To listen to a disc using the Dolby Digital modeType of Dolby digital signal Dolby DigitalEnjoy the Surround Sound Normal/Phantom/Bypass modeSurround Operation Enjoy the Surround Sound Virtual Dolby Surround Enjoy the Surround SoundVirtual Dolby Surround Changing Changing the Speaker SettingSpeaker size setting Speaker SettingMote control to select a value Changing the Speaker SettingSpeaker delay setting Within 8 seconds, use the SET UP W or X button on the reSpeaker level will decrease Speaker level settingFront speaker balance setting SpeakerSettingTest tone Dynamic range settingTerminology Description of TerminologyDescription Advanced Features Timer and Sleep Operation Timer and Sleep OperationTo confirm the remaining sleep time To cancel the sleep operationTo reset or change the timer setting Sleep operationCords required to connect an external unit Enhancing Your SystemEnhancing Your System To select the unit connected to the VIDEO/AUX in jack Using subwoofer speakers of other equipmentHeadphones To record on a tape from DVD or VCR etcTuner Troubleshooting ChartSymptom Possible cause CD playerCondensation Connecting DVD playerTroubleshooting Chart SymptomPress the 7 OPEN/CLOSE button to close the disc tray Troubleshooting ChartBefore transporting the unit Speaker terminalsCleaning the tape-handling parts MaintenanceCleaning the cabinet Specifications SpecificationsAmplifier Surround speaker SpecificationsFront speaker with subwoofer Center speakerMemo Memo Sharp Corporation

CD-DD4500 specifications

The Sharp CD-DD4500 is a versatile and powerful component CD player that blends retro design with modern technology, making it a standout choice for audiophiles and casual listeners alike. Known for its impressive build quality and impressive sound reproduction capabilities, the CD-DD4500 is a staple in home audio setups.

One of the key features of the Sharp CD-DD4500 is its robust CD playback capability, which supports various formats, including CD-DA, CD-R, and CD-RW. This means users can enjoy a wide range of audio content from traditional CDs to personalized playlists burned onto discs. The player is equipped with a high-performance digital-to-analog converter that ensures crisp and clear sound reproduction, minimizing distortion and enhancing the listening experience.

Another groundbreaking technology integrated into the CD-DD4500 is the inclusion of a built-in Bluetooth function. This feature allows users to stream audio wirelessly from their smartphones, tablets, or computers, providing seamless access to digital music libraries and online streaming services. Coupled with the player’s USB port, users can also connect flash drives to play their favorite tracks directly, making it an exceptionally flexible audio solution.

The CD-DD4500’s design is both functional and aesthetically pleasing. It features a user-friendly interface with a clear LCD display that makes it easy to navigate through tracks and functions. The intuitive controls allow for effortless operation, whether adjusting volume, selecting tracks, or entering programming modes.

Additionally, the unit boasts an integrated radio tuner with presets for various stations, expanding the listening options beyond CDs and Bluetooth streaming. Users can enjoy a wide array of music, news, and talk shows without needing additional equipment.

Sound quality is further enhanced by the inclusion of various output options. The Sharp CD-DD4500 features both optical and analog outputs, making it compatible with a variety of audio equipment, from amplifiers to home theater systems. The overall build quality of the device speaks to its durability, ensuring that it remains a reliable part of any audio setup for years to come.

In summary, the Sharp CD-DD4500 excels in combining classic CD playback capabilities with modern streaming features and high-quality sound performance, making it a top choice for those looking to enhance their audio experience in a stylish and modern package. Whether you’re a music enthusiast or just looking for a reliable way to enjoy your favorite tunes, the CD-DD4500 demonstrates performance and flexibility in one compact unit.
Top Page Image Contents