Sharp CD-DD4500 operation manual To record on a tape from DVD or VCR etc, Headphones

Page 39

To record on a tape from DVD or VCR etc.

1 Load a cassette in the TAPE 2 cassette compartment.

2 Press the DVD/VCR button.

To select the unit connected to the DVD jack

Press the DVD/VCR button repeatedly to select “DVD”.

To select the unit connected to the VIDEO/AUX IN jack

Press the DVD/VCR button repeatedly to select “VCR”.

3 Press the REC PAUSE I6 (I6) button.

4 Press the 0/R ( 0 ) button.

5 Play the DVD, VCR etc.

Note:

A DVD player allows you to select the “PCM” or “DOLBY DIGITAL” audio output mode. Before playing a Dolby digital sound disc, be sure to set the unit in the “DOLBY DIGI- TAL” mode. For more details, see the operation manual for your DVD player.

CD-DD4500

Using subwoofer speakers of other equipment

When a commercially available speaker with a built-in amplifier is connected to this unit, you can enjoy sound with emphasized bass.

1 Connect an RCA cord from a commercially available speaker with a built-in amplifier to the SUBWOOFER OUT jack.

2 Set the unit to “SW-EXT” in “Speaker size setting” (see page 31).

Note:

FeaturesAdvanced

SystemYourEnhancing– –

 

 

No sound is heard from the external subwoofer when in the Bypass/Virtual mode.

 

 

Headphones

 

 

Before plugging in or unplugging the headphones, reduce the volume.

 

 

Be sure your headphones have a 1/8" (3.5 mm) diameter plug and are between 16

 

 

ohms and 50 ohms impedance. The recommended impedance is 32 ohms.

 

 

Plugging in the headphones disconnects the speakers automatically. Adjust the

 

 

volume using the VOLUME control.

 

 

Note:

It is not possible to use the Normal/Phantom or Dolby Digital surround modes when using your headphones.

When headphones are connected to the headphones jack, the Normal/Phantom mode will be canceled. (The unit will be set to the Bypass mode automatically.)

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents CD-DD4500 Special Notes Explanation of Graphical SymbolsImportant Safeguards Accessories ContentsGeneral PrecautionsVolume control PrecautionsControls and Indicators General Information Controls and IndicatorsFront panel Rear panel 13 14 1519 20 21 DisplayRemote control Controls and IndicatorsCenter speaker Full-Range Speaker Speaker WireSpeaker system Front speaker leftSystem Connections Preparation for Use System ConnectionsAC 120 V, 60 Hz Speaker connection FM/AM loop antenna connectionPreparationforUse Preparation SpeakersPlacing the speakers For Use SpeakersSpeakers Connecting the AC power cordPreparation for Use Remote Control Remote ControlBattery installation Test of the remote controlDisplay brightness 2 levels Demonstration modeTo turn the power on General ControlBasic Operation Sound Control Sound ControlBass control EqualizerTo confirm the time display Setting the ClockBasic Operation Setting the Clock To readjust the clockListening to a CD CDs CD Playback Listening to a CD CDsPress the 7 OPEN/CLOSE button to close the disc tray To locate the desired portion To locate the beginning of a trackRepeat Play Repeat or Random PlayListening to a CD CDs Starting playback with a desired trackCD Playback Programmed Play Programmed PlayTo receive an FM stereo transmission Auto tuningListening to the Radio Radio Listening to the RadioTo recall a memorized station To scan the preset stationsListening to the Memorized Station Memorizing a stationFast forward/rewind Tape 2 only Listening to a Cassette Tape Tape 1 or TapeTape Playback Listening to a Cassette Tape Tape 1 or Tape Before playbackTape Recording Recording from the Radio Recording from the RadioTo perform programmed recording Recording from a CD CDsTape Recording Recording from a CD CDs Press the 0/R 0 button to start recordingPress the 0 / R 0 button to start dubbing To stop dubbing Dubbing from Tape to TapeErasing recorded tapes Tape Recording Dubbing from Tape to TapeDolby Digital To listen to a disc using the Dolby Digital modeType of Dolby digital signal Dolby DigitalNormal/Phantom/Bypass mode Enjoy the Surround SoundSurround Operation Enjoy the Surround Sound Enjoy the Surround Sound Virtual Dolby SurroundVirtual Dolby Surround Changing Changing the Speaker SettingSpeaker size setting Speaker SettingMote control to select a value Changing the Speaker SettingSpeaker delay setting Within 8 seconds, use the SET UP W or X button on the reSpeaker level will decrease Speaker level settingFront speaker balance setting SpeakerSettingTest tone Dynamic range settingDescription of Terminology TerminologyDescription Advanced Features Timer and Sleep Operation Timer and Sleep OperationTo confirm the remaining sleep time To cancel the sleep operationTo reset or change the timer setting Sleep operationEnhancing Your System Cords required to connect an external unitEnhancing Your System To select the unit connected to the VIDEO/AUX in jack Using subwoofer speakers of other equipmentHeadphones To record on a tape from DVD or VCR etcTuner Troubleshooting ChartSymptom Possible cause CD playerCondensation Connecting DVD playerTroubleshooting Chart SymptomPress the 7 OPEN/CLOSE button to close the disc tray Troubleshooting ChartBefore transporting the unit Speaker terminalsMaintenance Cleaning the tape-handling partsCleaning the cabinet Specifications SpecificationsAmplifier Surround speaker SpecificationsFront speaker with subwoofer Center speakerMemo Memo Sharp Corporation

CD-DD4500 specifications

The Sharp CD-DD4500 is a versatile and powerful component CD player that blends retro design with modern technology, making it a standout choice for audiophiles and casual listeners alike. Known for its impressive build quality and impressive sound reproduction capabilities, the CD-DD4500 is a staple in home audio setups.

One of the key features of the Sharp CD-DD4500 is its robust CD playback capability, which supports various formats, including CD-DA, CD-R, and CD-RW. This means users can enjoy a wide range of audio content from traditional CDs to personalized playlists burned onto discs. The player is equipped with a high-performance digital-to-analog converter that ensures crisp and clear sound reproduction, minimizing distortion and enhancing the listening experience.

Another groundbreaking technology integrated into the CD-DD4500 is the inclusion of a built-in Bluetooth function. This feature allows users to stream audio wirelessly from their smartphones, tablets, or computers, providing seamless access to digital music libraries and online streaming services. Coupled with the player’s USB port, users can also connect flash drives to play their favorite tracks directly, making it an exceptionally flexible audio solution.

The CD-DD4500’s design is both functional and aesthetically pleasing. It features a user-friendly interface with a clear LCD display that makes it easy to navigate through tracks and functions. The intuitive controls allow for effortless operation, whether adjusting volume, selecting tracks, or entering programming modes.

Additionally, the unit boasts an integrated radio tuner with presets for various stations, expanding the listening options beyond CDs and Bluetooth streaming. Users can enjoy a wide array of music, news, and talk shows without needing additional equipment.

Sound quality is further enhanced by the inclusion of various output options. The Sharp CD-DD4500 features both optical and analog outputs, making it compatible with a variety of audio equipment, from amplifiers to home theater systems. The overall build quality of the device speaks to its durability, ensuring that it remains a reliable part of any audio setup for years to come.

In summary, the Sharp CD-DD4500 excels in combining classic CD playback capabilities with modern streaming features and high-quality sound performance, making it a top choice for those looking to enhance their audio experience in a stylish and modern package. Whether you’re a music enthusiast or just looking for a reliable way to enjoy your favorite tunes, the CD-DD4500 demonstrates performance and flexibility in one compact unit.
Top Page Image Contents