Sharp CD-DD4500 operation manual To locate the beginning of a track, To locate the desired portion

Page 19

7 Press the 0/R (0 R) button to start playback.

Playback will begin from track 1 on the disc you have selected to play. After that disc finishes playing, the next disc will automatically play.

When the last track on the third disc has finished playing, the CD player will stop automatically.

When there is no CD in one of the disc 1 - 3 positions, that position will be skipped and the next CD will be played.

To interrupt playback:

Press the CD 6 button on the remote control.

To resume playback from the same point, press the 0 R button.

To stop playback:

Press the ■ (CD ■) button.

To remove the CDs:

While in the stop mode, press the 7 OPEN/CLOSE button.

The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to rotate the disc tray and remove the remaining disc.

After use:

Press the POWER button to enter the power stand-by mode.

Caution:

Do not place two CDs in one disc tray.

Do not push the disc tray while it is moving.

Do not turn the disc tray by hand. This may cause malfunctions.

If the power fails while the tray is open, wait until the power is restored.

If the disc tray is stopped forcibly, “ER-CD10” will appear in the display and the unit will not function.

If this occurs, press the POWER button to enter the stand-by mode and then turn the power on again.

If TV or radio interference occurs during CD operation, move the unit away from the TV or radio.

If a disc is damaged, dirty, or loaded upside down, the disc will be skipped.

CD-DD4500

To locate the beginning of a track

To move to the beginning of the next track:

Press the W PRESET 2 4 button for less than 0.5 seconds during playback.

●You can skip to any track by pressing the WPRE-

SET 2 4 button repeatedly until the desired

track number appears.

To restart the track being played:

 

 

 

Press the 5 3 PRESET X button for less than 0.5 seconds during

 

 

playback.

 

 

–

 

● You can skip to any track by pressing the

 

 

PlaybackCD

(CDs)CDatoListening–

 

5 3 PRESET

X button repeatedly until the

 

 

 

 

desired track number appears.

 

 

 

 

 

 

Notes:

 

 

 

 

You can locate the beginning of a track on a single disc only.

 

 

 

The 5/3 PRESET X or W PRESET 2/4 button on the remote control al-

 

 

 

lows you to locate the beginning of a track.

 

 

 

 

To locate the desired portion

 

 

 

 

 

 

 

 

 

 

 

 

 

For audible fast forward:

 

 

 

Press and hold down the W PRESET 2 4 button during playback.

 

 

For audible fast reverse:

Press and hold down the 5 3 PRESET X button during playback.

Notes:

Normal playback will resume when the 5 3 PRESET X or W PRESET 2 4 button is released.

You can locate the desired portion on a single disc only.

When the end of the last track is reached during fast forward, “END” will appear in the display and CD operation will be paused. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode.

The 5/3 PRESET X or W PRESET 2/4 button on the remote control al- lows you to locate the desired portion.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents CD-DD4500 Special Notes Explanation of Graphical SymbolsImportant Safeguards Accessories ContentsGeneral PrecautionsVolume control PrecautionsGeneral Information Controls and Indicators Controls and IndicatorsFront panel Rear panel 13 14 1519 20 21 DisplayRemote control Controls and IndicatorsCenter speaker Full-Range Speaker Speaker WireSpeaker system Front speaker leftPreparation for Use System Connections System ConnectionsAC 120 V, 60 Hz FM/AM loop antenna connection Speaker connectionPreparationforUse Preparation SpeakersPlacing the speakers For Use SpeakersSpeakers Connecting the AC power cordPreparation for Use Remote Control Remote ControlBattery installation Test of the remote controlDisplay brightness 2 levels Demonstration modeTo turn the power on General ControlBasic Operation Sound Control Sound ControlBass control EqualizerTo confirm the time display Setting the ClockBasic Operation Setting the Clock To readjust the clockCD Playback Listening to a CD CDs Listening to a CD CDsPress the 7 OPEN/CLOSE button to close the disc tray To locate the desired portion To locate the beginning of a trackRepeat Play Repeat or Random PlayListening to a CD CDs Starting playback with a desired trackCD Playback Programmed Play Programmed PlayTo receive an FM stereo transmission Auto tuningListening to the Radio Radio Listening to the RadioTo recall a memorized station To scan the preset stationsListening to the Memorized Station Memorizing a stationFast forward/rewind Tape 2 only Listening to a Cassette Tape Tape 1 or TapeTape Playback Listening to a Cassette Tape Tape 1 or Tape Before playbackTape Recording Recording from the Radio Recording from the RadioTo perform programmed recording Recording from a CD CDsTape Recording Recording from a CD CDs Press the 0/R 0 button to start recordingPress the 0 / R 0 button to start dubbing To stop dubbing Dubbing from Tape to TapeErasing recorded tapes Tape Recording Dubbing from Tape to TapeDolby Digital To listen to a disc using the Dolby Digital modeType of Dolby digital signal Dolby DigitalEnjoy the Surround Sound Normal/Phantom/Bypass modeSurround Operation Enjoy the Surround Sound Virtual Dolby Surround Enjoy the Surround SoundVirtual Dolby Surround Changing Changing the Speaker SettingSpeaker size setting Speaker SettingMote control to select a value Changing the Speaker SettingSpeaker delay setting Within 8 seconds, use the SET UP W or X button on the reSpeaker level will decrease Speaker level settingFront speaker balance setting SpeakerSettingTest tone Dynamic range settingTerminology Description of TerminologyDescription Advanced Features Timer and Sleep Operation Timer and Sleep OperationTo confirm the remaining sleep time To cancel the sleep operationTo reset or change the timer setting Sleep operationCords required to connect an external unit Enhancing Your SystemEnhancing Your System To select the unit connected to the VIDEO/AUX in jack Using subwoofer speakers of other equipmentHeadphones To record on a tape from DVD or VCR etcTuner Troubleshooting ChartSymptom Possible cause CD playerCondensation Connecting DVD playerTroubleshooting Chart SymptomPress the 7 OPEN/CLOSE button to close the disc tray Troubleshooting ChartBefore transporting the unit Speaker terminalsCleaning the tape-handling parts MaintenanceCleaning the cabinet Specifications SpecificationsAmplifier Surround speaker SpecificationsFront speaker with subwoofer Center speakerMemo Memo Sharp Corporation

CD-DD4500 specifications

The Sharp CD-DD4500 is a versatile and powerful component CD player that blends retro design with modern technology, making it a standout choice for audiophiles and casual listeners alike. Known for its impressive build quality and impressive sound reproduction capabilities, the CD-DD4500 is a staple in home audio setups.

One of the key features of the Sharp CD-DD4500 is its robust CD playback capability, which supports various formats, including CD-DA, CD-R, and CD-RW. This means users can enjoy a wide range of audio content from traditional CDs to personalized playlists burned onto discs. The player is equipped with a high-performance digital-to-analog converter that ensures crisp and clear sound reproduction, minimizing distortion and enhancing the listening experience.

Another groundbreaking technology integrated into the CD-DD4500 is the inclusion of a built-in Bluetooth function. This feature allows users to stream audio wirelessly from their smartphones, tablets, or computers, providing seamless access to digital music libraries and online streaming services. Coupled with the player’s USB port, users can also connect flash drives to play their favorite tracks directly, making it an exceptionally flexible audio solution.

The CD-DD4500’s design is both functional and aesthetically pleasing. It features a user-friendly interface with a clear LCD display that makes it easy to navigate through tracks and functions. The intuitive controls allow for effortless operation, whether adjusting volume, selecting tracks, or entering programming modes.

Additionally, the unit boasts an integrated radio tuner with presets for various stations, expanding the listening options beyond CDs and Bluetooth streaming. Users can enjoy a wide array of music, news, and talk shows without needing additional equipment.

Sound quality is further enhanced by the inclusion of various output options. The Sharp CD-DD4500 features both optical and analog outputs, making it compatible with a variety of audio equipment, from amplifiers to home theater systems. The overall build quality of the device speaks to its durability, ensuring that it remains a reliable part of any audio setup for years to come.

In summary, the Sharp CD-DD4500 excels in combining classic CD playback capabilities with modern streaming features and high-quality sound performance, making it a top choice for those looking to enhance their audio experience in a stylish and modern package. Whether you’re a music enthusiast or just looking for a reliable way to enjoy your favorite tunes, the CD-DD4500 demonstrates performance and flexibility in one compact unit.
Top Page Image Contents