Sharp CD-DD4500 Sleep operation, To cancel the sleep operation, Maximum 3 hours Minimum 1 minute

Page 37

6 Press the TUNING/TIME (W or X) button to specify the minute, then press the MEMORY/SET button.

7 The unit will enter the timer stand-by mode automatically.

To cancel the timer playback/timer recording:

Press the POWER button to turn the power on.

8 When the preset time is reached, playback or recording will start.

The volume will increase gradually until it reaches the volume you were listen- ing at before your system enters the timer stand-by mode.

9 In timer playback:

If you select CD or TAPE, the unit will enter the stand-by mode after the playback. If you select TUNER or DVD/VCR, it will enter the stand-by mode one hour after the timer playback starts.

In timer recording:

When recording tape reaches its end, the timer recording will end, and the unit will enter the stand-by mode.

The timer playback/timer recording setting will be canceled if any other op- eration than volume control is performed during its operation.

■Sleep operation

1 Play back the desired sound source.

2 Press the TIMER/SLEEP button repeatedly until “SLEEP” is dis- played.

To change the sleep time:

While the sleep time is displayed, press the TUNING/TIME (X or W) button.

(Maximum: 3 hours - Minimum: 1 minute)

●3 hours - 5 minutes → 5-minute intervals

●5 minutes - 1 minute → 1-minute intervals

3 Press the MEMORY/SET button.

4 Your system will enter the power stand-by mode automatically after the preset time has elapsed.

The volume will be turned down 1 minute before the sleep operation finishes.

To cancel the sleep operation:

Press the POWER button while sleep operation is performed.

To confirm the remaining sleep time:

Press the TIMER/SLEEP button while sleep operation is performed. The remaining sleep time is displayed for about 5 seconds.

Note:

Once the sleep time is set, it will remain unchanged until the setting is changed.

CD-DD4500

Advanced Features – Timer and Sleep Operation –

To reset or change the timer setting:

Perform “Timer playback or Timer recording” from the beginning.

Notes:

●Once the time is set, the setting will be retained until a new time is entered.

●When performing timer playback or recording using another unit connected to the VIDEO/AUX IN or DIGITAL IN jacks, select “DVD/VCR” in step 2. At this time, only this unit will be turned on or enter the power stand-by mode automatically. (Another unit will not be turned on or turned off.)

■ Listening to the Radio (See page 22.)

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents CD-DD4500 Special Notes Explanation of Graphical SymbolsImportant Safeguards Accessories ContentsVolume control PrecautionsPrecautions GeneralGeneral Information Controls and Indicators Controls and IndicatorsFront panel 19 20 21 13 14 15Display Rear panelRemote control Controls and IndicatorsSpeaker system Full-Range Speaker Speaker WireFront speaker left Center speakerPreparation for Use System Connections System ConnectionsAC 120 V, 60 Hz FM/AM loop antenna connection Speaker connectionPreparationforUse Placing the speakers SpeakersFor Use Speakers PreparationSpeakers Connecting the AC power cordBattery installation Remote ControlTest of the remote control Preparation for Use Remote ControlTo turn the power on Demonstration modeGeneral Control Display brightness 2 levelsBass control Sound ControlEqualizer Basic Operation Sound ControlBasic Operation Setting the Clock Setting the ClockTo readjust the clock To confirm the time displayCD Playback Listening to a CD CDs Listening to a CD CDsPress the 7 OPEN/CLOSE button to close the disc tray To locate the desired portion To locate the beginning of a trackListening to a CD CDs Repeat or Random PlayStarting playback with a desired track Repeat PlayCD Playback Programmed Play Programmed PlayListening to the Radio Auto tuningRadio Listening to the Radio To receive an FM stereo transmissionListening to the Memorized Station To scan the preset stationsMemorizing a station To recall a memorized stationTape Playback Listening to a Cassette Tape Tape 1 or Tape Listening to a Cassette Tape Tape 1 or TapeBefore playback Fast forward/rewind Tape 2 onlyTape Recording Recording from the Radio Recording from the RadioTape Recording Recording from a CD CDs Recording from a CD CDsPress the 0/R 0 button to start recording To perform programmed recordingErasing recorded tapes Dubbing from Tape to TapeTape Recording Dubbing from Tape to Tape Press the 0 / R 0 button to start dubbing To stop dubbingType of Dolby digital signal To listen to a disc using the Dolby Digital modeDolby Digital Dolby DigitalEnjoy the Surround Sound Normal/Phantom/Bypass modeSurround Operation Enjoy the Surround Sound Virtual Dolby Surround Enjoy the Surround SoundVirtual Dolby Surround Speaker size setting Changing the Speaker SettingSpeaker Setting ChangingSpeaker delay setting Changing the Speaker SettingWithin 8 seconds, use the SET UP W or X button on the re Mote control to select a valueFront speaker balance setting Speaker level settingSpeakerSetting Speaker level will decreaseTest tone Dynamic range settingTerminology Description of TerminologyDescription Advanced Features Timer and Sleep Operation Timer and Sleep OperationTo reset or change the timer setting To cancel the sleep operationSleep operation To confirm the remaining sleep timeCords required to connect an external unit Enhancing Your SystemEnhancing Your System Headphones Using subwoofer speakers of other equipmentTo record on a tape from DVD or VCR etc To select the unit connected to the VIDEO/AUX in jackSymptom Possible cause Troubleshooting ChartCD player TunerTroubleshooting Chart Connecting DVD playerSymptom CondensationBefore transporting the unit Troubleshooting ChartSpeaker terminals Press the 7 OPEN/CLOSE button to close the disc trayCleaning the tape-handling parts MaintenanceCleaning the cabinet Specifications SpecificationsAmplifier Front speaker with subwoofer SpecificationsCenter speaker Surround speakerMemo Memo Sharp Corporation

CD-DD4500 specifications

The Sharp CD-DD4500 is a versatile and powerful component CD player that blends retro design with modern technology, making it a standout choice for audiophiles and casual listeners alike. Known for its impressive build quality and impressive sound reproduction capabilities, the CD-DD4500 is a staple in home audio setups.

One of the key features of the Sharp CD-DD4500 is its robust CD playback capability, which supports various formats, including CD-DA, CD-R, and CD-RW. This means users can enjoy a wide range of audio content from traditional CDs to personalized playlists burned onto discs. The player is equipped with a high-performance digital-to-analog converter that ensures crisp and clear sound reproduction, minimizing distortion and enhancing the listening experience.

Another groundbreaking technology integrated into the CD-DD4500 is the inclusion of a built-in Bluetooth function. This feature allows users to stream audio wirelessly from their smartphones, tablets, or computers, providing seamless access to digital music libraries and online streaming services. Coupled with the player’s USB port, users can also connect flash drives to play their favorite tracks directly, making it an exceptionally flexible audio solution.

The CD-DD4500’s design is both functional and aesthetically pleasing. It features a user-friendly interface with a clear LCD display that makes it easy to navigate through tracks and functions. The intuitive controls allow for effortless operation, whether adjusting volume, selecting tracks, or entering programming modes.

Additionally, the unit boasts an integrated radio tuner with presets for various stations, expanding the listening options beyond CDs and Bluetooth streaming. Users can enjoy a wide array of music, news, and talk shows without needing additional equipment.

Sound quality is further enhanced by the inclusion of various output options. The Sharp CD-DD4500 features both optical and analog outputs, making it compatible with a variety of audio equipment, from amplifiers to home theater systems. The overall build quality of the device speaks to its durability, ensuring that it remains a reliable part of any audio setup for years to come.

In summary, the Sharp CD-DD4500 excels in combining classic CD playback capabilities with modern streaming features and high-quality sound performance, making it a top choice for those looking to enhance their audio experience in a stylish and modern package. Whether you’re a music enthusiast or just looking for a reliable way to enjoy your favorite tunes, the CD-DD4500 demonstrates performance and flexibility in one compact unit.
Top Page Image Contents