Sharp CD-DD4500 operation manual Specifications, Amplifier

Page 44

Specifications

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

References

– Specifications –

General

Power source

AC 120 V, 60 Hz

 

 

Power consumption

230 W

 

 

Dimensions

Width: 10-11/16" (270 mm)

 

Height: 13" (330 mm)

 

Depth: 14-11/16" (372 mm)

 

 

Weight

19.4 lbs (8.8 kg)

 

 

Amplifier

Output power

Front speakers (Main) : 30 W minimum RMS per chan-

 

nel into 8 ohms.

 

Front speakers (Subwoofer) : 40 W per channel : 6 ohms

 

(100 Hz, 10 % T.H.D.)

 

Center speaker : 30W : 6 ohms

 

(1 kHz, 10 % T.H.D.)

 

Surround speakers : 20W per channel : 8 ohms

 

(1 kHz, 10 % T.H.D.)

 

 

Output terminals

Front speakers (Main) : 8 ohms

 

Front speakers (Subwoofer) : 6 ohms

 

Center speaker : 6 ohms

 

Surround speakers : 8 ohms

 

Subwoofer(Pre-out) : 10 kohms

 

Headphones : 16-50 ohms (recommended; 32 ohms)

 

 

Input terminals

DVD (Digital) : Optical

 

VCR/Auxiliary : 500 mV/47 kohms

 

 

CD player

Type

3-disc multi-play compact disc player

 

 

Signal readout

Non-contact, 3-beam semiconductor laser pickup

 

 

D/A converter

1-bit D/A converter

 

 

Frequency response

20 - 20,000 Hz

 

 

Dynamic range

100 dB (1 kHz)

 

 

Tuner

Frequency range

FM: 87.5-108 MHz

 

AM: 530-1,720 kHz

 

 

Cassette deck

Frequency response

50 -14,000 Hz (Normal tape)

 

 

Signal/noise ratio

55 dB (TAPE 1, playback)

 

50 dB (TAPE 2, recording/playback)

 

 

Wow and flutter

0.25 % (WRMS)

 

 

44

Page 43 Page 45
Image 44
Page 43 Page 45
Contents CD-DD4500 Explanation of Graphical Symbols Special NotesImportant Safeguards Contents AccessoriesPrecautions Volume controlPrecautions GeneralFront panel Controls and IndicatorsGeneral Information Controls and Indicators 13 14 15 19 20 21Display Rear panelControls and Indicators Remote controlFull-Range Speaker Speaker Wire Speaker systemFront speaker left Center speakerAC 120 V, 60 Hz System ConnectionsPreparation for Use System Connections PreparationforUse Speaker connectionFM/AM loop antenna connection Speakers Placing the speakersFor Use Speakers PreparationConnecting the AC power cord SpeakersRemote Control Battery installationTest of the remote control Preparation for Use Remote ControlDemonstration mode To turn the power onGeneral Control Display brightness 2 levelsSound Control Bass controlEqualizer Basic Operation Sound ControlSetting the Clock Basic Operation Setting the ClockTo readjust the clock To confirm the time displayPress the 7 OPEN/CLOSE button to close the disc tray Listening to a CD CDsCD Playback Listening to a CD CDs To locate the beginning of a track To locate the desired portionRepeat or Random Play Listening to a CD CDsStarting playback with a desired track Repeat PlayProgrammed Play CD Playback Programmed PlayAuto tuning Listening to the RadioRadio Listening to the Radio To receive an FM stereo transmissionTo scan the preset stations Listening to the Memorized StationMemorizing a station To recall a memorized stationListening to a Cassette Tape Tape 1 or Tape Tape Playback Listening to a Cassette Tape Tape 1 or TapeBefore playback Fast forward/rewind Tape 2 onlyRecording from the Radio Tape Recording Recording from the RadioRecording from a CD CDs Tape Recording Recording from a CD CDsPress the 0/R 0 button to start recording To perform programmed recordingDubbing from Tape to Tape Erasing recorded tapesTape Recording Dubbing from Tape to Tape Press the 0 / R 0 button to start dubbing To stop dubbingTo listen to a disc using the Dolby Digital mode Type of Dolby digital signalDolby Digital Dolby DigitalSurround Operation Enjoy the Surround Sound Normal/Phantom/Bypass modeEnjoy the Surround Sound Virtual Dolby Surround Enjoy the Surround SoundVirtual Dolby Surround Changing the Speaker Setting Speaker size settingSpeaker Setting ChangingChanging the Speaker Setting Speaker delay settingWithin 8 seconds, use the SET UP W or X button on the re Mote control to select a valueSpeaker level setting Front speaker balance settingSpeakerSetting Speaker level will decreaseDynamic range setting Test toneDescription Description of TerminologyTerminology Timer and Sleep Operation Advanced Features Timer and Sleep OperationTo cancel the sleep operation To reset or change the timer settingSleep operation To confirm the remaining sleep timeEnhancing Your System Enhancing Your SystemCords required to connect an external unit Using subwoofer speakers of other equipment HeadphonesTo record on a tape from DVD or VCR etc To select the unit connected to the VIDEO/AUX in jackTroubleshooting Chart Symptom Possible causeCD player TunerConnecting DVD player Troubleshooting ChartSymptom CondensationTroubleshooting Chart Before transporting the unitSpeaker terminals Press the 7 OPEN/CLOSE button to close the disc trayCleaning the cabinet MaintenanceCleaning the tape-handling parts Amplifier SpecificationsSpecifications Specifications Front speaker with subwooferCenter speaker Surround speakerMemo Memo Sharp Corporation

CD-DD4500 specifications

The Sharp CD-DD4500 is a versatile and powerful component CD player that blends retro design with modern technology, making it a standout choice for audiophiles and casual listeners alike. Known for its impressive build quality and impressive sound reproduction capabilities, the CD-DD4500 is a staple in home audio setups.

One of the key features of the Sharp CD-DD4500 is its robust CD playback capability, which supports various formats, including CD-DA, CD-R, and CD-RW. This means users can enjoy a wide range of audio content from traditional CDs to personalized playlists burned onto discs. The player is equipped with a high-performance digital-to-analog converter that ensures crisp and clear sound reproduction, minimizing distortion and enhancing the listening experience.

Another groundbreaking technology integrated into the CD-DD4500 is the inclusion of a built-in Bluetooth function. This feature allows users to stream audio wirelessly from their smartphones, tablets, or computers, providing seamless access to digital music libraries and online streaming services. Coupled with the player’s USB port, users can also connect flash drives to play their favorite tracks directly, making it an exceptionally flexible audio solution.

The CD-DD4500’s design is both functional and aesthetically pleasing. It features a user-friendly interface with a clear LCD display that makes it easy to navigate through tracks and functions. The intuitive controls allow for effortless operation, whether adjusting volume, selecting tracks, or entering programming modes.

Additionally, the unit boasts an integrated radio tuner with presets for various stations, expanding the listening options beyond CDs and Bluetooth streaming. Users can enjoy a wide array of music, news, and talk shows without needing additional equipment.

Sound quality is further enhanced by the inclusion of various output options. The Sharp CD-DD4500 features both optical and analog outputs, making it compatible with a variety of audio equipment, from amplifiers to home theater systems. The overall build quality of the device speaks to its durability, ensuring that it remains a reliable part of any audio setup for years to come.

In summary, the Sharp CD-DD4500 excels in combining classic CD playback capabilities with modern streaming features and high-quality sound performance, making it a top choice for those looking to enhance their audio experience in a stylish and modern package. Whether you’re a music enthusiast or just looking for a reliable way to enjoy your favorite tunes, the CD-DD4500 demonstrates performance and flexibility in one compact unit.
Top Page Image Contents