Sharp CD-DD4500 Troubleshooting Chart, Before transporting the unit, Speaker terminals

Page 42

References

Troubleshooting Chart –

 

–

 

 

Troubleshooting Chart (continued)

■ Clearing all the memory (reset)

 

When TIMER indicator is flashing

 

 

1. Press the POWER button to enter the power stand-by mode.

The unit will be overheated when TIMER indicator is flashing.

2. While pressing down the 0 / R button and X-BASS/DEMO button, press

Due to a problem in the speaker circuit, the unit will enter the stand-by mode

automatically.

the POWER button until “CLEAR AL” appears.

In this case, take the following corrective actions.

 

 

 

 

 

 

1. Unplug the AC power plug from the AC outlet.

 

 

 

 

 

 

2. Make sure that the unit vent is not blocked.

 

 

 

3. Make sure that the speaker wires have been correctly connected to the

 

 

 

 

speaker terminals.

Caution:

4. After checking items 2 and 3 above, wait for 2 or 3 hours before trying to use

This operation will erase all data stored in memory including clock, timer settings,

 

the unit.

tuner preset, CD program, and other set-up details.

5. Reconnect the AC power cord.

■ Before transporting the unit

1. Press the POWER button to turn the power on.

2. Press the CD button.

3. Press the 7 OPEN/CLOSE button to open the disc tray.

Remove all CDs inserted the unit.

4. Press the 7 OPEN/CLOSE button to close the disc tray.

Make sure that “NO DISC” is displayed.

5.Press the POWER button to enter the stand-by mode, and then unplug the AC power cord from the AC outlet.

Note:

If the TIMER indicator flashes again during use, please unplug the AC power plug, and contact a SHARP authorized service center.

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents CD-DD4500 Explanation of Graphical Symbols Special NotesImportant Safeguards Contents AccessoriesPrecautions PrecautionsVolume control GeneralControls and Indicators General Information Controls and IndicatorsFront panel Display 13 14 1519 20 21 Rear panelControls and Indicators Remote controlFront speaker left Full-Range Speaker Speaker WireSpeaker system Center speakerSystem Connections Preparation for Use System ConnectionsAC 120 V, 60 Hz Speaker connection FM/AM loop antenna connectionPreparationforUse For Use Speakers SpeakersPlacing the speakers PreparationConnecting the AC power cord SpeakersTest of the remote control Remote ControlBattery installation Preparation for Use Remote ControlGeneral Control Demonstration modeTo turn the power on Display brightness 2 levelsEqualizer Sound ControlBass control Basic Operation Sound ControlTo readjust the clock Setting the ClockBasic Operation Setting the Clock To confirm the time displayListening to a CD CDs CD Playback Listening to a CD CDsPress the 7 OPEN/CLOSE button to close the disc tray To locate the beginning of a track To locate the desired portionStarting playback with a desired track Repeat or Random PlayListening to a CD CDs Repeat PlayProgrammed Play CD Playback Programmed PlayRadio Listening to the Radio Auto tuningListening to the Radio To receive an FM stereo transmissionMemorizing a station To scan the preset stationsListening to the Memorized Station To recall a memorized stationBefore playback Listening to a Cassette Tape Tape 1 or TapeTape Playback Listening to a Cassette Tape Tape 1 or Tape Fast forward/rewind Tape 2 onlyRecording from the Radio Tape Recording Recording from the RadioPress the 0/R 0 button to start recording Recording from a CD CDsTape Recording Recording from a CD CDs To perform programmed recordingTape Recording Dubbing from Tape to Tape Dubbing from Tape to TapeErasing recorded tapes Press the 0 / R 0 button to start dubbing To stop dubbingDolby Digital To listen to a disc using the Dolby Digital modeType of Dolby digital signal Dolby DigitalNormal/Phantom/Bypass mode Enjoy the Surround SoundSurround Operation Enjoy the Surround Sound Enjoy the Surround Sound Virtual Dolby SurroundVirtual Dolby Surround Speaker Setting Changing the Speaker SettingSpeaker size setting ChangingWithin 8 seconds, use the SET UP W or X button on the re Changing the Speaker SettingSpeaker delay setting Mote control to select a valueSpeakerSetting Speaker level settingFront speaker balance setting Speaker level will decreaseDynamic range setting Test toneDescription of Terminology TerminologyDescription Timer and Sleep Operation Advanced Features Timer and Sleep OperationSleep operation To cancel the sleep operationTo reset or change the timer setting To confirm the remaining sleep timeEnhancing Your System Cords required to connect an external unitEnhancing Your System To record on a tape from DVD or VCR etc Using subwoofer speakers of other equipmentHeadphones To select the unit connected to the VIDEO/AUX in jackCD player Troubleshooting ChartSymptom Possible cause TunerSymptom Connecting DVD playerTroubleshooting Chart CondensationSpeaker terminals Troubleshooting ChartBefore transporting the unit Press the 7 OPEN/CLOSE button to close the disc trayMaintenance Cleaning the tape-handling partsCleaning the cabinet Specifications SpecificationsAmplifier Center speaker SpecificationsFront speaker with subwoofer Surround speakerMemo Memo Sharp Corporation

CD-DD4500 specifications

The Sharp CD-DD4500 is a versatile and powerful component CD player that blends retro design with modern technology, making it a standout choice for audiophiles and casual listeners alike. Known for its impressive build quality and impressive sound reproduction capabilities, the CD-DD4500 is a staple in home audio setups.

One of the key features of the Sharp CD-DD4500 is its robust CD playback capability, which supports various formats, including CD-DA, CD-R, and CD-RW. This means users can enjoy a wide range of audio content from traditional CDs to personalized playlists burned onto discs. The player is equipped with a high-performance digital-to-analog converter that ensures crisp and clear sound reproduction, minimizing distortion and enhancing the listening experience.

Another groundbreaking technology integrated into the CD-DD4500 is the inclusion of a built-in Bluetooth function. This feature allows users to stream audio wirelessly from their smartphones, tablets, or computers, providing seamless access to digital music libraries and online streaming services. Coupled with the player’s USB port, users can also connect flash drives to play their favorite tracks directly, making it an exceptionally flexible audio solution.

The CD-DD4500’s design is both functional and aesthetically pleasing. It features a user-friendly interface with a clear LCD display that makes it easy to navigate through tracks and functions. The intuitive controls allow for effortless operation, whether adjusting volume, selecting tracks, or entering programming modes.

Additionally, the unit boasts an integrated radio tuner with presets for various stations, expanding the listening options beyond CDs and Bluetooth streaming. Users can enjoy a wide array of music, news, and talk shows without needing additional equipment.

Sound quality is further enhanced by the inclusion of various output options. The Sharp CD-DD4500 features both optical and analog outputs, making it compatible with a variety of audio equipment, from amplifiers to home theater systems. The overall build quality of the device speaks to its durability, ensuring that it remains a reliable part of any audio setup for years to come.

In summary, the Sharp CD-DD4500 excels in combining classic CD playback capabilities with modern streaming features and high-quality sound performance, making it a top choice for those looking to enhance their audio experience in a stylish and modern package. Whether you’re a music enthusiast or just looking for a reliable way to enjoy your favorite tunes, the CD-DD4500 demonstrates performance and flexibility in one compact unit.
Top Page Image Contents