Sharp MD-MX20 Minidisc Editing, What the editing function can do, To create a disc name

Page 27

MINIDISC EDITING

What the editing function can do

You can create original discs using the MiniDisc editing func- tion, on which you can change the order of the tracks and you can create disc or track names.

Playback-only MiniDiscs cannot be edited.

Tracks (up to 255 tracks per disc) can be named. Since track names are displayed when the beginning of each track is located or during playback, you can quickly check the name of each track.

To create a disc name

TIMER/DELETE

2,6 1

3,5 2,4

1 Press the MD button.

The total number of tracks and the total playing time on a MiniDisc will appear.

2 Press the NAME/TOC EDIT button, and then select "DISC NAME" using the jog dial.

3 Within 10 seconds, press the MEMORY/ENTER button.

DISC

The unit will enter the character input mode.

4 Select the character you want using the jog dial.

DISC

5 Press the MEMORY/ENTER button to enter the char- acter.

DISC

Repeat steps 4 to 5 above to enter the characters in the name.

6 After entering all of the characters in the name, press the NAME/TOC EDIT button.

The disc name will be recorded.

To erase a disc name:

After performing steps 1 to 3.

1Press the TIMER/DELETE button for 2 seconds or more.

"NAME CLEAR" will flash.

2Press the MEMORY/ENTER button.

Notes:

Up to 40 characters can be entered.

This function cannot be used in the random play mode and APMS play mode.

Type of characters used

Type of

 

 

Characters (Symbols)

 

characters

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Capital letters

A B

C

D

E F

G

H I J K L M N O P Q

R S

T

U

V W

X

Y Z

 

 

 

 

 

 

 

 

 

Symbols

1 2

3

4

5 6

7

8 9 0 ! "

$ % & '

( )

 

+ , - . / ? @ < = > _

 

 

 

 

 

 

 

 

 

 

Number of characters you can enter

Disc names and track names

Up to 40 characters (including spaces) can be entered for each name.

If more than 40 characters are entered, "NAME FULL" will appear.

Total number of characters per MiniDisc

A total of approximately 1,700 characters can be used for all of the disc and track names. If more than 1,700 characters are entered, " TOC FULL" will appear.

While editing, the "TOC" indicator is displayed. This means the edit results have not been recorded on the MiniDisc.

To record the results, select another input or set the unit to the stand-by mode. During writing, the "TOC" goes out, all editing changes will be recorded on the disc.

26

Image 27
Contents MD-MX20 Please retain this information Special NotesNear water for example, near a bathtub, washbowl Important SafeguardsAccessories ContentsCare of compact discs PrecautionsVolume control GeneralFront panel Names of Controls and IndicatorsRear panel Display windowRemote control Speaker section Preparation for USE Antenna connectionSpeaker connection Placing the system Connecting the AC power cordDemo mode Removing the speaker grillesDimmer Remote control To change the brightness of the displayPrecautions for battery use When bright Lights up When dark Goes outSetting the Clock ON/STAND-BY Memory EnterClock Extra bass X-BASS VolumeSound Control Pre-programmed equalizerCD playback Compact Disc OperationPress the MD 06 button Minidisc OperationMiniDisc playback To remove a MiniDiscMD/CD 3 MD/CD Convenient CD and Minidisc OperationsApss Auto Program Search System Cue and reviewApms Automatic Programmable Music Selector CD HClear CD H MD H Mode Repeat and random playDisplay Switching the time displayChanging the display during MiniDisc playback TimeAuto tuning Manual tuningClear Memory Enter Preset tuningPreset memory scan PresetAbout track numbers Minidisc RecordingDifferences from tape recordings Disc writing TOCTo stop recording To cancel the operationRecording from a CD onto a MiniDisc One-Touch Editing To check the remaining time available for record- ingTrack editing from a CD onto a MiniDisc Press the CD 06 button To record without using One-Touch EditingApms recording from a CD onto a MiniDisc Press the REC buttonRecording from the built-in radio onto a MiniDisc To record the track number while recordingCheck the recordable time by pressing the Display button To create a disc name TIMER/DELETEMinidisc Editing What the editing function can doTo erase a track name To create a track nameTo add a character TIMER/DELETE NAME/TOC Edit 3 MD Memory EnterTo change disc names and track names Jog dial To delete a characterPress the MEMORY/ENTER button again When both tracks have a nameDivide Combine Two consecutive tracks can be combined into one trackDesignated track can be moved to any desired position MoveAll of the tracks you want to erase can be erased at once Erase All EraseTracks you want to erase can be erased one at a time To erase tracks one at a timeTuner Band 2 AUX Timer OperationTimer playback/Timer recording Jog dial 2 CD HSimultaneous sleep and timer operation Sleep operationSTAND-BY Using External Units Connecting external unitsHeadphones Manual recording Listening to sound from an external unitWhat is a MINIDISC? General TroubleshootingIf a problem occurs Minidisc System LimitationsRadio reception Resetting the MicrocomputerRemote control MiniDisc recording and playbackNumber or Error MessagesError messages Meaning Remedy SymbolSpecifications MaintenanceMemo Memo Model Specific Section Where to Obtain Service What to do to Obtain Service