(Continued)
■ Divide | ■ Combine |
A single track can be divided into two at any de- sired position.
● The numbers of the tracks which come after the newly di- vided track will be automatically increased by one.
1 | 2 |
| 3 |
|
| A | B | C | D |
1 | 2 |
| 3 | 4 |
| A | B | C | D |
Two consecutive tracks can be combined into one track.
●The numbers assigned to the tracks following the com- bined tracks will be decreased by one automatically.
1 | 2 | 3 | 4 | |
| A | B |
| C D |
|
|
|
|
|
1 2 3
A B C D
2 MD ■ 1
3,4 2
2 MD ■ 1
3,4
1,2
1 Play the track which you want to divide into two, and press the MD 06 button at the point where you want to divide the track.
2 Press the NAME/TOC EDIT button, and within 10 sec- onds, select "DIVIDE" using the jog dial.
3 Within 10 seconds, press the MEMORY/ENTER button.
1 While in the stop mode, select the second of the two adjacent tracks you want to combine using the jog dial.
Or start playing the second of the two tracks you want to combine, and then press the MD 06 button.
2 Press the NAME/TOC EDIT button, and within 10 sec- onds, select "COMBINE" using the jog dial.
3 Within 10 seconds, press the MEMORY/ENTER button.
●To cancel the operation, press the MD ■ button.
4 Press the MEMORY/ENTER button again.
●The track is divided, and the unit is stopped at the begin- ning of the second of the two tracks.
●The numbers of the tracks which come after the divided track are automatically increased by one.
●When a track has been given a name is divided, the two new tracks will have the same name. If "TOC FULL" mes- sage is seen, reduce unnecessary tracks recorded on the disc to make enough space (page 37).
Notes:
●This unit can hold up to 255 tracks. However, even if the number of tracks assigned has not reached 255, it might not be possible to make any further divisions of tracks (page 37).
●This function cannot be used in the random play mode and APMS play mode.
●To cancel the operation, press the MD ■ button.
4 Press the MEMORY/ENTER button again.
●The two tracks are combined, and the unit is stopped at the beginning of the combined track.
●The numbers assigned to the tracks following the com- bined track are automatically decreased by one.
When both tracks have a name:
●When only the first track has a name → That name will be used.
●When only the second of the two tracks has a name → That name will be used.
●When both tracks have a name → The name of the first track will be used. To rename it, see page 28.
29