Toshiba DKA-UG-CRDLS-VC 4016149 manual CO Line Access Codes, To access a line

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– CO Line Access Codes

CO Line Access Codes

CO lines are used when you dial an outside number. If your telephone does not have a &2 or /LQH button, you can enter the appropriate code listed in Table 1 to access an outside line.

You can also store the code on a 6' button for one-touch access. If you are storing a CO line access code onto a Speed Dial code, enter ￿￿ before the CO access code (e.g., to store code

￿￿￿￿, enter ￿￿￿￿￿￿).

In some systems, ￿ is used as a general group code or to access Least Cost Routing (LCR). System users are required to dial ￿ in order to access an outside line. If you press ￿ in a system programmed with LCR, you may not hear internal dial tone, depending on system programming.

See your System Administrator for the code which applies to your telephone.

➤To access a line

➤ Press [PDN] + CO Line Access Code.

Table 1	CO Line Access Codes
	System	CO Line Access Codes
	DK14	￿￿or￿￿￿￿a￿￿￿￿or￿￿￿￿￿￿a￿￿￿￿￿
	DK16e	￿￿or￿￿￿￿a￿￿￿￿or ￿￿￿￿￿a￿￿￿￿￿
	DK40	￿￿or￿￿￿￿a￿￿￿￿or ￿￿￿￿￿a￿￿￿￿￿
	DK424 (RCTUA)	￿￿or￿￿￿￿a￿￿￿￿or￿￿￿￿￿￿a￿￿￿￿￿
	DK424 (RCTUBA/BB)	￿￿or￿￿￿￿a￿￿￿￿or￿￿￿￿￿￿a￿￿￿￿￿
	DK424 (RCTUC/D)	￿￿or￿￿￿￿a￿￿￿￿or￿￿￿￿￿￿a￿￿￿￿￿
	DK424 (RCTUE/F)	￿￿or￿￿￿￿a￿￿￿￿or￿￿￿￿￿￿a￿￿￿￿￿

Notes

●

●

●

￿￿accesses LCR or general line groups.

￿￿￿a￿￿￿ accesses line groups 1~16, respectively.

￿￿￿￿￿a￿￿￿￿￿ accesses individual lines 1~200, respectively.

Appendix 95