Toshiba DKA-UG-CRDLS-VC 4016149 manual To park a call, To pick up or retrieve a parked call

Call Park Orbits (Release 3 or later) ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Call Park Orbits (Release 3 or later)

The Call Park Orbit feature enables you to hold a call temporarily in an orbit for anyone to retrieve. You can have the same station or a different station. There are 20 General Park Orbits for the system and one Personal Park Orbit for each station. Once you have parked a call in an orbit, you can:

♦Hang up and retrieve the parked call at a later time.

♦Originate another call.

♦Access a voice paging device to announce the parked call for pickup from another station.

If you park a call and your station is idle while the system Call Park recall timer expires, the parked call automatically recalls to your station. If your station is busy, the parked call camps onto your station.

➤To park a call

1.	Press 3DUN￿LQ￿2UELW while	The Line or [DN] LED flashes at the
	on an internal or outside call.	consultation-hold rate until you enter the orbit
		number.
	...or￿&QI￿7UQ + ￿￿￿￿.
2.	Enter a General Orbit	After dialing the orbit number, you hear a short dial
	Number (￿￿￿~￿￿￿)	tone and the call is parked. The Line LED flashes at
		the Hold rate, or the [DN] LED goes out.
	...or enter a valid [PDN].

3.Press 7$/..

➤To pick up or retrieve a parked call

1.	Press the parked￿/LQH, [DN]	The Line LED flashes at an on-hold rate (the [DN]
	or 3DUN￿LQ￿2UELW	LED is off). The call is parked at the orbit with the
		orbit number that you have just entered.
	...or [DN] + ￿￿￿￿.
2.	Enter the Orbit Number or the	The Orbit Number is usually provided in the paging
	[PDN] where the call is	announcement. The Line or [DN] LED lights steady
	parked.	when the call is picked up or retrieved.

58 Strata DK Cordless Digital Telephone 5/99