Toshiba DKA-UG-CRDLS-VC 4016149 manual Connect and Apply Power to Base Unit

Step 3: Connect and Apply Power to Base Unit –––––––––––––––––––––––––––––––––––––––––––––––––––––––

➤To use as a stand-alone telephone

➤ Connect the modular jack labeled “Line In” to the telephone wall jack.

➤	To use with a desk telephone	Wide	AC Adapter
		Blade

1. Unplug the telephone line cord from your desk telephone.

2.Connect this cord to “Line In” of your cordless telephone.

3.Using the two foot modular cord that came

with your cordless telephone, connect the jack	1174
labeled “Line Out” to the desk telephone.

Step 3: Connect and Apply Power to Base Unit

Note The AC adapter furnished with this telephone may be equipped with a polarized line plug (a plug having one blade wider than the other). This plug fits into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still does not fit, contact your facilities coordinator about replacing the obsolete plug. Do not alter the shape of the blades on the polarized plug.

1. Plug the AC adapter cord into the AC adapter input jack on the base unit.

1145

AC Adapter	Modular
	Cords	Line Out
		to DKT

Line In to Digital Telephone Circuit

(DK14 KSU or DK40 Base KSU, KCDU, PDKU2, RDSU)

See I&M Manual, Chapter 8—DK40/DK424 Universal Slot PCB Wiring

18 Strata DK Cordless Digital Telephone 5/99