Q-See QH32DVR4C user manual Basic Operation Guide Power On, Light is off, please do the following

Page 17

Press A

【】

4.2 Preview

QH32DVR4C User’s Manual

Chapter 4: Basic Operation Guide

4.1Power On

Note: Please make sure the power supply is the correct one for the DVR and the AC adapter is connected correctly. Before switching DVR on, please connect one monitor to VOUT or VGA interface, otherwise you can not see graphic user interface and can not operate the DVR.

If	POWER		light is off, please do the following:
Step1: Re-connect power cable;
Step2: Switch on the power button on the rear panel.
If	POWER	light is red, just press POWER					button to start DVR.
When DVR is started,					POWER	light is green. On the monitor or VGA display,
DSP and HDD initialization process will be shown.
	【	】
The first line represents DSP initialization. If the DSP icon is “ ”, it means there
is a DSP initialization error, please contact administrator at once.
The【 second 】line represents HDD initialization.【							】If the HDD icon is “ ”, it means
the HDD is not installed					or not detected. If HDD is not detected, please contact
administrator.				【		】

Note: If HDD is not installed or not detected, DVR will beep an×alarm.× You can disable the beeping in the “alarm” menu ->”Exceptions” option.

DVR will enter into preview mode after it is started.

On preview screen, you can see date, time, camera name and camera status icon.

Set system date and time in “Camera” “Date OSD” menu, please refer to

Chapter 5.5;	→

Change camera name in “Camera” menu, please refer to Chapter 5.5

On the screen, it will display record and alarm status of each camera. As shown in fig 4.1, These two types of status will switch over automatically.

key to display or hide the camera status bar.

17

Image 17

Contents QH32DVR4C QH32DVR4C User’s Manual QH32DVR4C User’s Manual Website Customer Service Storage Functions Product IntroductionOthers Preview & Playback FunctionsNetwork Functions Checking the DVR and Its Accessories InstallationHard Drive HDD Installation Installation Notice Installation ToolsQSC26404 Rear Panel System SetupRear Panel Description Front Panel Operational InstructionsFront Panel Form 3-1 Items on Front Panel Index Type Name Description【】【】 Index Name Description IR Remote ControlStarting the Remote Control Loading the Batteries Into the Remote Control【】Disabling the Remote Control Powering Down the DVRForm 3-3 List of Menu Options Menu Description Menu OptionsMain Menu Description How to Enter Into Menu ModeMenu Operation You can use To select one Key to select number, upper case, lower case or symbolsKey to enter into Edit status, you can input text in the boxInput Text How to Exit MenuKey to exit menu and return to preview mode Light is off, please do the following Basic Operation Guide Power OnLight is green. On the monitor or VGA display Key to display or hide the camera status barIcon Icon Color Status Description Recording status Form 4-1 Camera record statusKey to switch to multi-screen view Alarm statusLogin User Name and PasswordChange Password Input passwordKeys. As .6 shows Change users’ passwordPTZ Control Interface PTZ Pan, Tilt, Zoom ControlSelect Channel Adjust Preset DescriptionPTZ Control Keys Description Press Key to select the PTZ camera on channel【Exit PTZ Control】 Mode Start/Stop Auto in PTZ Control ModePress ESC or Enter to exit and return to preview mode Manual【】Record【】Description Playback10 Playback interface To select recorded file type. The file type options areList box. You can use To pause/continue playback. If played frame by Open/Close soundFrame, Press Copy segment Edit Stop copyControl Bar Functions Playback With Mouse AttachedBar stays at the file you want to backup, press Edit Backup Recorded FilesPlayback interface, you can backup the recorded files Again to stop selecting. This segment is selected 12 Playback listPlease refer to Chapter Shutting Down the DVRAdministrator and Password Parameters Setup GuideEnter into administrator menu Password ModificationUser management Enter into User Management interface Add and Delete UsersSteps are as follows Add UserAdd new user name Setup the password for new userSave the new user’s password and rights Setup the rights for new userUser rights description Local Press Cancel or ESC to abort deleting. As shown in figRemote through network or internet MAC AddressUnit Name and Device ID Effective. Press Cancel button or ESCConfirm button and press Key to abort modificationPress Confirm button to save or Cancel to abort Video Output Standard and VGA SetupVGA setup Device IDCamera Name Position To save the changeCamera Name Move your active frame to Date/Time setup and press enter Display menu, you can setup DVR system date and timeReturn to Camera menu, and press Confirm button to save it. Then use Key to select OSD format. Here are the OSD formatsDate OSD Position Video Parameters SetupTo abort modification Select camera Please useSatisfied with the real time video image, press Enter 22*18 panels 22*15 for NTSC, you can use Keys to move Mask Area SetupHere is an example of the mask area function shown as fig Disabling the mask check box cancels the mask areaSelect sensitivity View Tampering AlarmEnter into Camera menu Select camera Please use Enter into Camera menu Video Loss AlarmAfter your setup, press Confirm button Save alarm setupEnter into Camera menu Select camera Use Motion DetectionClear all motion areas Press Clear motion area】【 Preview Properties QH32DVR4C User’s Manual Recording menu description Recording SetupBit Rate Type All day recording setup Enter into recording schedule menuSelect a day and enable all day recording option Setup time period and record type Select one day and disable all day recording optionRecord type Copy to other daysExternal alarm input setup External Alarm Input and Relay OutputAlarm type Enter into Alarm in Handling sub menuSchedule for alarm handle method Alarm trigger record channel setupAlarm handle method Save setupPTZ Linkage Select delay time Alarm relay output setup Alarms menu, useEnter into alarm out schedule Setup alarm out scheduleExceptions Network menu description Network ParametersAdvanced setup description PPPoE DVR supports PPPoE dail-up function Accessing the DVR over a network Accessing the DVR from a remote computer PTZ menu description PTZ Pan, Tilt, ZoomPreset setup Iris FOCUS+ FOCUS- ZOOM+ Sequence setupCruise setup Utilities Restore ParametersUpgrade Reboot Stop Alarm OutPower Off Hard Disk ManagementView Log By Type&Date For example The steps of viewing alarm logBy Time System Information FTP Server Setup Firmware UpgradeSetup username Upgrade Mode Single click the left key Drag the left keyRight click MovingScroll wheel forward Click the right key= d i ⎟ 8 ⋅ 3600 ⎟1024 Appendix B HDD Capacity CalculationRJ45 introduction Pin definition Appendix C DVR Connect Cable DefinitionMaterial and tool QH32DVR4C User’s Manual Appendix D DVR Specifications Models QOCDC60 QOCDC36 Appendix D Camera SpecificationsFailure Possible reasons Appendix E TroubleshootingAppendix F Product Service & Warranty Appendix G Customer Information Card Website Customer Service