Q-See QH32DVR4C user manual Motion Detection, Enter into Camera menu Select camera Use

QH32DVR4C User’s Manual

5.10 Motion Detection

If you enable this function, when there is motion detected by a camera, the DVR will send an alarm.

Step 1: Enter into “Camera” menu:

Step 2: Select camera: Use	key to select a camera after pressing edit	key.
【 】【 】	【	】
Step 3: Select motion detection sensitivity: On the right side of “Motion Det. Level”, there

is a list box for motion detection sensitivity. There are 7 options, from 0 (the lowest) to 5 (the

highest) and “Off”. You can use keys to select one. If you select the “Off” option, the DVR

will not response even if there【is↑motion】【↓】 detected. If you select other options, it will activate the “Motion Area Setup” button and “Policy Setup” button. If you select low sensitivity such as 0, the DVR will response only when there is a great amount of motion detected. On the other side, for high sensitivity such as 5, the DVR will respond with small amounts of motion detected.

Step 4: Motion area setup: You must define motion areas so that DVR will respond when there is motion detected in those areas. Move “Active Frame” to “Area” button on the right side of

the sensitivity list box, press the ENTER key, you will enter into the “Motion Area Setup”

interface s

hown as fig 5.17: 【 】

Fig 5.17 Motion area setup

49