Q-See QH32DVR4C Bit Rate Type, All day recording setup Enter into recording schedule menu

Page 55

QH32DVR4C User’s Manual

Bit Rate Type:

The DVR will use the fixed bit rate to compress image. The bit rate size is defined in “Bit Rate” option. With this option we can calculate the recorded file size and network bandwidth that we need.

The maximum bit rate selection is related to resolution. If you select high resolution, you must select high bit rate. For CIF resolution, the typical maximum bit rate is 384K-768Kbps.

Of course, you will select the proper max bit rate based on the camera, background and image quality required.

Bit rate: You can select bit rate size for fixed bit rate type. It is the same as “Max Bit Rate”.

Frame Rate: Frame per second. Options are: 25 (PAL)/30(NTSC) 20, 16, 12, 10, 8, 6, 4, 2, 1 For low frame rate, you can select low bit rate size, this will maximize hard drive usage.

PreRecord Time: When you enable motion detection recording or external alarm recording, you can setup prerecord time. The options are: No PreRecord, 5 Seconds (default selection), 10 Seconds, 15 Seconds, 20 Seconds, 25 Seconds, 30 Seconds and Max PreRecord.

MaxPreRecord is used to save all data in PreRecord buffer. The PreRecord time is related with bit rate. The lower bit rate, the longer PreRecord time is.

If the bit rate (Max bit rate) is very low, and you select “PreRecord Time” as “5 Seconds” the actual pre-record time may be more than 5 seconds. On the other hand, if the bit rate is high, and you set “PreRecord Time” as “30 Seconds”, the actual prerecord time may be less than 30 seconds.

PostRecord Time: When external alarm or motion alarm is stopped, DVR will continue recording time. The options are: 5 Seconds (default), 10 Seconds, 30 Seconds, 1 Minute, 2 Minutes, 5 Minutes and 10 Minutes.

Enable Rec: Enable or disable selected camera’s record function. “ ” means disabled and

“ ” means enabled.

Schedule: When you enable recording function, you can setup recording schedule.

Note: When the camera’s recording schedule is modified, you must reboot the DVR to make

it effective.

All day recording setup:

Step 1: Enter into recording schedule menu

×

 

 

 

 

In recording menu, use ENTER

or EDIT

key to enable record function (“ ” flag), press

“Schedule” button to enter into recording schedule menu.

 

 

【

】 【

】

 

Step 2: Select a day and enable all day recording option

 

For “Day”, the options are: Monday, Tuesday, Wednesday, Thursday, Friday, Saturday and

Sunday. Use

keys to select a day. Move the “Active Frame” to the check box on the right

【↑】【↓】

【

】 【

】

×

side of “All Day”, press

ENTER

or

EDIT

key to enable the “All Day” option. “ ” means

disabled and “ ” means enabled.

55

Page 54 Page 56
Image 55
Page 54 Page 56
Contents QH32DVR4C QH32DVR4C User’s Manual QH32DVR4C User’s Manual Website Customer Service Storage Functions Product IntroductionNetwork Functions Preview & Playback FunctionsOthers Installation Notice Installation Tools InstallationChecking the DVR and Its Accessories Hard Drive HDD InstallationRear Panel Description System SetupQSC26404 Rear Panel Index Type Name Description Operational InstructionsFront Panel Front Panel Form 3-1 Items on Front Panel【 】【 】 Index Name Description IR Remote ControlPowering Down the DVR Loading the Batteries Into the Remote Control【 】Starting the Remote Control Disabling the Remote ControlForm 3-3 List of Menu Options Menu Description Menu OptionsMenu Operation How to Enter Into Menu ModeMain Menu Description Edit status, you can input text in the box Key to select number, upper case, lower case or symbolsYou can use To select one Key to enter intoKey to exit menu and return to preview mode How to Exit MenuInput Text Key to display or hide the camera status bar Basic Operation Guide Power OnLight is off, please do the following Light is green. On the monitor or VGA displayIcon Icon Color Status Description Recording status Form 4-1 Camera record statusKey to switch to multi-screen view Alarm statusInput password User Name and PasswordLogin Change PasswordKeys. As .6 shows Change users’ passwordPTZ Control Interface PTZ Pan, Tilt, Zoom ControlPress Key to select the PTZ camera on channel Adjust Preset DescriptionSelect Channel PTZ Control Keys DescriptionManual【 】Record【 】 Start/Stop Auto in PTZ Control Mode【Exit PTZ Control】 Mode Press ESC or Enter to exit and return to preview modeDescription PlaybackList box. You can use To select recorded file type. The file type options are10 Playback interface Copy segment Edit Stop copy Open/Close soundTo pause/continue playback. If played frame by Frame, PressControl Bar Functions Playback With Mouse AttachedPlayback interface, you can backup the recorded files Backup Recorded FilesBar stays at the file you want to backup, press Edit Again to stop selecting. This segment is selected 12 Playback listPlease refer to Chapter Shutting Down the DVRPassword Modification Parameters Setup GuideAdministrator and Password Enter into administrator menuUser management Add User Add and Delete UsersEnter into User Management interface Steps are as followsAdd new user name Setup the password for new userSave the new user’s password and rights Setup the rights for new userMAC Address Press Cancel or ESC to abort deleting. As shown in figUser rights description Local Remote through network or internetKey to abort modification Effective. Press Cancel button or ESCUnit Name and Device ID Confirm button and pressDevice ID Video Output Standard and VGA SetupPress Confirm button to save or Cancel to abort VGA setupCamera Name To save the changeCamera Name Position Then use Key to select OSD format. Here are the OSD formats Display menu, you can setup DVR system date and timeMove your active frame to Date/Time setup and press enter Return to Camera menu, and press Confirm button to save it.Date OSD Position Video Parameters SetupSatisfied with the real time video image, press Enter Select camera Please useTo abort modification 22*18 panels 22*15 for NTSC, you can use Keys to move Mask Area SetupHere is an example of the mask area function shown as fig Disabling the mask check box cancels the mask areaEnter into Camera menu Select camera Please use View Tampering AlarmSelect sensitivity Enter into Camera menu Video Loss AlarmAfter your setup, press Confirm button Save alarm setupEnter into Camera menu Select camera Use Motion DetectionClear all motion areas Press Clear motion area】 【 Preview Properties QH32DVR4C User’s Manual Recording menu description Recording SetupSelect a day and enable all day recording option All day recording setup Enter into recording schedule menuBit Rate Type Copy to other days Select one day and disable all day recording optionSetup time period and record type Record typeEnter into Alarm in Handling sub menu External Alarm Input and Relay OutputExternal alarm input setup Alarm typeSave setup Alarm trigger record channel setupSchedule for alarm handle method Alarm handle methodPTZ Linkage Setup alarm out schedule Alarm relay output setup Alarms menu, useSelect delay time Enter into alarm out scheduleExceptions Network menu description Network ParametersAdvanced setup description PPPoE DVR supports PPPoE dail-up function Accessing the DVR over a network Accessing the DVR from a remote computer PTZ menu description PTZ Pan, Tilt, ZoomPreset setup Iris FOCUS+ FOCUS- ZOOM+ Sequence setupCruise setup Utilities Restore ParametersUpgrade Hard Disk Management Stop Alarm OutReboot Power OffView Log By Time For example The steps of viewing alarm logBy Type&Date System Information FTP Server Setup Firmware UpgradeSetup username Upgrade Mode Moving Drag the left keySingle click the left key Right clickScroll wheel forward Click the right key= d i ⎟ 8 ⋅ 3600 ⎟1024 Appendix B HDD Capacity CalculationMaterial and tool Appendix C DVR Connect Cable DefinitionRJ45 introduction Pin definition QH32DVR4C User’s Manual Appendix D DVR Specifications Models QOCDC60 QOCDC36 Appendix D Camera SpecificationsFailure Possible reasons Appendix E TroubleshootingAppendix F Product Service & Warranty Appendix G Customer Information Card Website Customer Service
Top Page Image Contents