Q-See QH32DVR4C user manual Playback, Description

Page 25

QH32DVR4C User’s Manual

Description

Manual record interface has the following parts: channel number, channel status, start/stop record, start all and stop all buttons.

Channel: Lists the channel numbers that the DVR has.

Status: Channel work status has 4 status options: means idle. Green means the channel is recording (including real time recording, alarm recording, motion detection recording). Red means network transmission. Orange means both recording and network transmission.

Start/Stop: “ ” means you can start corresponding channel recording. “ ”

means you can stop recording.	×
means you can stop recording.
Start All: Press this button to start all channels recording.
Stop All: Press this button to stop all channel recording.
Press ESC key to enter into preview mode. Press MENU key to enter into

main menu. Press PLAY key to enter into playback menu. Press PTZ key to enter

【		】		【	】
into PTZ control mode.			【	】
4.6 Playback
Note: The【user must】	have “Playback” rights.

Playback Interface

In preview mode, press the PLAY key, in the pop-up login dialog box, select username and input correct password,【 you】will enter into “Playback” interface.

In menu mode, press PLAY key, you can enter into “Playback” interface

directly as shown in Fig 4.9【(The two】screen playback function is not available on all models)

Fig 4.9 Playback interface

25

Image 25

Contents QH32DVR4C QH32DVR4C User’s Manual QH32DVR4C User’s Manual Website Customer Service Storage Functions Product IntroductionNetwork Functions Preview & Playback FunctionsOthers Checking the DVR and Its Accessories InstallationHard Drive HDD Installation Installation Notice Installation ToolsRear Panel Description System SetupQSC26404 Rear Panel Front Panel Operational InstructionsFront Panel Form 3-1 Items on Front Panel Index Type Name Description【】【】 Index Name Description IR Remote ControlStarting the Remote Control Loading the Batteries Into the Remote Control【】Disabling the Remote Control Powering Down the DVRForm 3-3 List of Menu Options Menu Description Menu OptionsMenu Operation How to Enter Into Menu ModeMain Menu Description You can use To select one Key to select number, upper case, lower case or symbolsKey to enter into Edit status, you can input text in the boxKey to exit menu and return to preview mode How to Exit MenuInput Text Light is off, please do the following Basic Operation Guide Power OnLight is green. On the monitor or VGA display Key to display or hide the camera status barIcon Icon Color Status Description Recording status Form 4-1 Camera record statusKey to switch to multi-screen view Alarm statusLogin User Name and PasswordChange Password Input passwordKeys. As .6 shows Change users’ passwordPTZ Control Interface PTZ Pan, Tilt, Zoom ControlSelect Channel Adjust Preset DescriptionPTZ Control Keys Description Press Key to select the PTZ camera on channel【Exit PTZ Control】 Mode Start/Stop Auto in PTZ Control ModePress ESC or Enter to exit and return to preview mode Manual【】Record【】Description PlaybackList box. You can use To select recorded file type. The file type options are10 Playback interface To pause/continue playback. If played frame by Open/Close soundFrame, Press Copy segment Edit Stop copyControl Bar Functions Playback With Mouse AttachedPlayback interface, you can backup the recorded files Backup Recorded FilesBar stays at the file you want to backup, press Edit Again to stop selecting. This segment is selected 12 Playback listPlease refer to Chapter Shutting Down the DVRAdministrator and Password Parameters Setup GuideEnter into administrator menu Password ModificationUser management Enter into User Management interface Add and Delete UsersSteps are as follows Add UserAdd new user name Setup the password for new userSave the new user’s password and rights Setup the rights for new userUser rights description Local Press Cancel or ESC to abort deleting. As shown in figRemote through network or internet MAC AddressUnit Name and Device ID Effective. Press Cancel button or ESCConfirm button and press Key to abort modificationPress Confirm button to save or Cancel to abort Video Output Standard and VGA SetupVGA setup Device IDCamera Name To save the changeCamera Name Position Move your active frame to Date/Time setup and press enter Display menu, you can setup DVR system date and timeReturn to Camera menu, and press Confirm button to save it. Then use Key to select OSD format. Here are the OSD formatsDate OSD Position Video Parameters SetupSatisfied with the real time video image, press Enter Select camera Please useTo abort modification 22*18 panels 22*15 for NTSC, you can use Keys to move Mask Area SetupHere is an example of the mask area function shown as fig Disabling the mask check box cancels the mask areaEnter into Camera menu Select camera Please use View Tampering AlarmSelect sensitivity Enter into Camera menu Video Loss AlarmAfter your setup, press Confirm button Save alarm setupEnter into Camera menu Select camera Use Motion DetectionClear all motion areas Press Clear motion area】【 Preview Properties QH32DVR4C User’s Manual Recording menu description Recording SetupSelect a day and enable all day recording option All day recording setup Enter into recording schedule menuBit Rate Type Setup time period and record type Select one day and disable all day recording optionRecord type Copy to other daysExternal alarm input setup External Alarm Input and Relay OutputAlarm type Enter into Alarm in Handling sub menuSchedule for alarm handle method Alarm trigger record channel setupAlarm handle method Save setupPTZ Linkage Select delay time Alarm relay output setup Alarms menu, useEnter into alarm out schedule Setup alarm out scheduleExceptions Network menu description Network ParametersAdvanced setup description PPPoE DVR supports PPPoE dail-up function Accessing the DVR over a network Accessing the DVR from a remote computer PTZ menu description PTZ Pan, Tilt, ZoomPreset setup Iris FOCUS+ FOCUS- ZOOM+ Sequence setupCruise setup Utilities Restore ParametersUpgrade Reboot Stop Alarm OutPower Off Hard Disk ManagementView Log By Time For example The steps of viewing alarm logBy Type&Date System Information FTP Server Setup Firmware UpgradeSetup username Upgrade Mode Single click the left key Drag the left keyRight click MovingScroll wheel forward Click the right key= d i ⎟ 8 ⋅ 3600 ⎟1024 Appendix B HDD Capacity CalculationMaterial and tool Appendix C DVR Connect Cable DefinitionRJ45 introduction Pin definition QH32DVR4C User’s Manual Appendix D DVR Specifications Models QOCDC60 QOCDC36 Appendix D Camera SpecificationsFailure Possible reasons Appendix E TroubleshootingAppendix F Product Service & Warranty Appendix G Customer Information Card Website Customer Service